Igor Gaspar posts
Posts: 28
Files: 71
Update: Qidi 3×PPA (GF, CF, Core)
Spreadsheet update, Qidi 3 PPA based filaments are tested and added to the table (PAHT-GF, PAHT-CF and UltraPA-CF25). Early access to this video (public from this afternoon). Link is in the table or use the Playlists. I almost finished Phaetus PPA, eSun PET, Sunlu PC-ABS and Spectrum PETG+Teflon fil...
Early access: Polymaker CoPE, a replacement for PLA?
Hello, there is no spreadsheet update, I tested mostly the printability (and few mechanical tests). So, what is your opinion about CoPE? https://youtu.be/h1MEu1mLKZEIt will be premiered in 3 hours from now (15:30 CEST)
Spreadsheet update: Creality PPA-CF
Hello, there is a new update, Creality PPA-CF is added to the table (attached to this post). What filament testing is in the progress, and objects are already printed? Qidi CF, GF and Core PPA based filamentsPhaetus CF Core (in gray color, so we can see the core of the filament)Sunlu PC-ABSSpectrum ...
Qidi Plus4, early access, news
Hello, Just to inform you about my latest activity. Qidi Plus4 review video is finished, public from tomorrow, but you can find it in the 3D printing playlist. Soon I can start PPS filament testing too. What is already printed: Creality PPA-CF, Sunlu PC-ABS, Qidi 3xPPA based filaments (CF, GF and Co...
Update: BambuLab PC-FR
Early access (but only few hours) and table update, new line is BambuLab flame resistant polycarbonate (PC-FR). Video link in the table (or follow the playlists).
Update: Siraya PPA×3
Spreadsheet is updated, new 3 lines: Siraya PPA, PPA-CF and PPA-CF Core (attached to this post). What is in the progress (and I can see the end): BambuLab PC-FRPolymaker CoPEQidi PLUS 4Just a reminder: Tomorrow, March 8th—don’t forget to print something special for your wife, girlfriend, or moth...
Polymaker has offered to sponsor my channel!
They don’t expect me to change anything—they just want to support my research. This likely means more Polymaker filament tests (amount of other brands will not be reduced) and using their materials in project videos.But your opinion matters to me. Do you think my filament tests would still be un...
Update: Tinmorry PETG-GF (glass fiber 2x)
Hello, table updated (attached to this post). Tinmorry PETG-GF. What's next? (recording is in progress):Siraya PPA 3x (I can see, they changed the name in the meantime). According to first results, Core filaments may be the future of good technical filaments.AirGradient air monitor (spoiler, so ...
Annealing of PLA-CF early access
Hello everyone,I barely managed to finish my latest video—watch it here: https://youtu.be/5XOqUfmWhig(public on Friday). Unfortunately, I’ve had the flu for over a week now and have almost completely lost my voice. That’s why my voice will sound weird in the next few videos (including this one...
Update (MatterHackers PLA, 3DO PC, Fiberon PET-CF17)
Hello, the table has been updated (attached to this post). It now includes MatterHackers PLA, 3DO PC, and Fiberon PET-CF17. The video for the last one is ready, but I am still working on the description (link in the table or in Playlists).There is an important update: I have recorded the average val...
If I get the prototype, then the prototype will be in the video (Sunlu E2)
Eh, I am so tired of testing prototypes. Then the companies "don't mention this or that, it is fixed in mass production...". If somebody wants to download the table with measured temperatures, it is attached to this post. Sunlu will not like the video, it will be public tomorrow, but ear...
Tullomer is tested (table update)
Hello, Tullomer test is finally finished. The updated table is attached to this post. Video will be public this afternoon (CET). Results are the average from test objects printed by 3 different sources, including Z-Polymers (manufacturer). Title is "Love it or Hate it", that's why I have...
Update: PEKK-CF, PEI, PPS, PSU...
Hello, table update. 6 industrial filaments by 3DXTechprinted on Prusa Pro HT90(attached to this post). Video link is in the table (or you can find it in playlists). Other: Great news: Tullomerprinting is in progress, soon I will start the testing. First feeling, one of the strongest in XY direction...
Table update: Qidi PET-GF and PET-CF
Hello Friends! Happy New Year to everybody. Table is updated (attached to this post), Qidi PET-GF and PET-CF. Pay attention to the Layer adhesion. Video is uploaded (available in Playlists, but you also have the link in the table). Still working on description..Other: Tullomer filament is here! Also...
PEEK vs PPA-CF results
First of all, thank you all for Your support, without You, this channel would be placed in a stand-by position, You are the real driving force for the MyTechFun. Have a pleasant Holidays and I wish you all Happy New Year. PEEK vs PPA-CFvideo is finished (working on description and subtitles, it will...
Table update: Addnorth RigidX and PETG
Hello, recently I finished the testing of AddNorth Rigid X and PETG filaments. The Rigid X is the stiffest PETG filament I tested so far (in bending test). New spreadsheet is attached to this post. Video in few hours (or you can find it even now in 3D printing playlist, I am working on the descripti...
Who is drying the filament in a Microwave?
In the Vevor Analytical Scale review video, I got a lot of comments, to try drying the filament in a Microwave oven. I did. It can speed up the process, but in some cases it can catch fire. Video very soon..
About Tullomer filament
I just finished the online meeting with Z-Polymers. The subject was: Tullomer filament. Before they send me the filament, they want to test it using my test objects. But don't worry, if they decide not to send it to me, I will buy it, because I am curious about it myself (even if it is 500$/kg)....
Update: Siraya PET-CF, ABS-GF, ASA-GF
Summary table update, 3 Siraya filaments added. PET-CF, ABS-GF, ASA-GF. The PET-CF video will be public on Friday, but early access over this link: https://youtu.be/Y7npttLpcO0What is next? From filament testing: BambuLaball wood filaments, AddNorthPETG vs RigidX, 3DOPC vs PC-CF, BTTPLA for baskedba...
Update: BambuLab TPU for AMS
Summary table update:- BambuLab TPU for AMS (it is on the second sheet). Video will be public on Sunday (since for today I have one AddNorth video).- New column is added. I got several request to add bending modulus calculation to it. It is calculated for 1.25 kg load, deformation after 30 seconds. ...
SLA vs SLS 3D printing
Just an early access to latest video. Also, the data is added to the summary table. Attached to this post. https://youtu.be/E6niY8MtkM4
Update (Tinmorry, BL ASA-CF, Onyx nylon)
Hello, new spreadsheet updated (attached to this post):Tinmorry PLA-CF, PETG-CF (from previous video), BambuLab ASA-CF and from today video Onyx Nylon (but regular, not GF reinforced, printed with my regular settings). Today video, early access (public in 6 hours from now): https://youtu.be/8vHjrHDZ...
Table update (Eryone 2x) + early access Sunlu Esthetic filaments video
Hello, The Summary Table is updated (attached to this post). Eryone PETG and PETG-CF filaments are added. Also, I added a new column, the color. Only I will need some time to fill it. Sunlu Esthetic filaments, I know that this is not the exact type of videos you like, but if you want, you can see it...
Big wearing test - early access
Wearing test video will be public on Friday (since for today I have a laser engraver video), but you can have early access to it following this link: https://youtu.be/Vg-FcCrVrZY
Update on the summary table (2024 March)
Hello, The summary table is updated (link is unchanged so far), added:Polymaker PLA-CF, PLA ProQidi vs BambuLab TPU-95 HFYXPolyer PC-CF and Nylon-CFSoon (next Friday): BambuLab PETG (basic, translucent, CF)What would you like to be the next?Bambulab ABS, ASA, PC filamentsQidi ABS and ASA filaments (...
TPU filament prolongation %
Hello, The summary table is refreshed (link is the same). Azurefilm 85A TPU filament added. Also I measured the new test with other filaments too (prolongation % with 0.5 kg load). It is added to the table.
New data to summary table (JamgHe and CNC vs 3D printing)
Happy New Year, there is an update to summary table.- JamgHe PLA+ and PETG from latest video- CNC vs 3D printing (ABS, PC, Nylon) from my next video.- Added new rows for statistics, quickly we can see how new filament compares to average value.Download link is the same: https://mytechfun.com/downloa...
Polymaker PC-ABS testing in progress
Just a small info, I am so excited to share it with somebody, but nobody in my surrounding wants to listen to me (I tried to tell to my wife too, but she sent me to "warmer lands"). First time I was able to print with Polymakers PC-ABS filament (according to specs, it requires heated chamber...
