Igor Gaspar patreon

Table update: Qidi PET-GF and PET-CF

🕑 Added 2025-01-09 20:03:45 +0000 UTC

Comments

Igor Gaspar

Earlier I had fix link for the spreadsheet, but somebody started selling it. Some temporary Patreon. That's why now I have new upload for every update.

Carmelo Locurto

Scratch that, found a newer spreadsheet. It seems I'm just not used to finding files on here.

Carmelo Locurto

I don't see the Fiberon PET-CF17 in here. I see the video so can get the values but updated to the latest spreadsheet and the QIDI is in there but not the Fiberon? Unless I'm missing something.

Joseph Heimiller

I was not prepared for the amount of data in the spreadsheet. Maybe a good YouTube video would be to make a simplistic flow chart to determine which filament to use. Use the assumption one has a heated chamber to be able to print more advanced filaments. Also, put in disclaimer it's over-simplified to avoid annoying know-it-all engineer (you know who you are) comments.

Tom

Greetings Igor and others! Love the info and the testing methods. I was in a research and technical support role, so kind of a geek! New "again" to 3D printing after over 15 years out of it. Used your spreadsheet to inform my purchases. Sadly, several filaments I thought most interesting so far are not available in the USA without big shipping! I suppose the reverse of Igor's problem getting US filaments to test. Have a GREAT day, and kind regards...

Daniel Lee

Australia, I bought it on Amazon AU, there seems to be 2 listings for it and Im not sure if they are the same but both seem to have GF. I found it on Aliexpress but is cheaper (and faster at least for me) via Amazon, found it on Amazon Belgium too - https://www.amazon.com.be/CC3D-imprimante-dimpression-temp%C3%A9ratures-remplissage/dp/B0CHW5NJ94/ref=sr_1_1?crid=2VKK2A9NCF3W0&dib=eyJ2IjoiMSJ9.ejnlMVbJORthWUbxtyyvHpbn47YpXYwvRg1c3AdNey1oEU_TTOkt0KFbuTy5S6xkFJFhHM8Fh0SJ96YeBJlvavyJ5L0_7ZC8x6-PHZ8D2p4X8EssGfa3S80tsoSBWyHpiTLfs9Avy4OThvx2zZQFi02I_U4HlTuxHFl99SMd-ouuzgLSjX4v05-VdqboIvZ_OUMolkzjFCQPBske3GB3A7C2Hon9cPqF1uD83NCu8ux04l7fNcqobVtRuXe7FNuzeRz5N4Bu7zt7hl2qTylSFUIW--5rkZdvJVn15L-nJhtAxw_KM0-ENmSVfK5ZfZLdccihWP6s9sk1gL_RMAm1S4zTw8JYxm_11xoCwyC2qSuUDqU0vptdkorZfwO5QokORaY0lEGUICpHN4UNpiWH8ao3y8kPIJfFNI2xvLBaw6ZFF9OALAK-ne2i4AW5LgZw.3qOYg_21NplbKSolqwlIlVOewJX4xoToDS5ebaua81U&dib_tag=se&keywords=cc3d+pbt+pro&qid=1736729285&sprefix=cc3d+pbt+%2Caps%2C346&sr=8-1

Igor Gaspar

Is it available in EU too? So far I can see only in US. Where are you from?

Daniel Lee

Really curious to see Cc3d's PBT Pro (GF). Can even send a roll if you're interested, it's rather inexpensive filament.

Jack Wilson

Also thank you for all the work that you do! its great data and insight for the 3d printing community.

Igor Gaspar

Currently, I have filaments here for the testing for the next 4-5 months. ABS-GF25 is not between them. Maybe after this I can add them to the list.

Jack Wilson

Have you considered trying qidi abs-gf25? they make an interesting claim about the fibers only being on the inner part of the filament so that the added glass has less of an impact on the layer adhesion.

Jack Wilson

Very excited to see some more PET-CF filaments. This has become my goto over pa6CF, although the impact resistance isn't quite as good. I am finding the ease of printing, cost, and speed all better while still maintaining good layer adhesion, stiffness and thermal resistance.