thisoldtony

patreon

thisoldtony posts

Posts: 0 Files: 0

Bonding Grinding Belts Back Together?

I've been trying this for years, to no avail.Spoiler warning for my patreons: still no avail. -frowny face- However! Sometimes the journey is its own reward. TBD on this journey. If this is something you happen to know a little bit about, I'm all ears!!Hugs/Kisses,OldTony

Power Burnishing On The Lathe

A video popped up on my feed about power burnishing. I'd never seen such a thing.Turns out, it's a thing. You can even buy commercial burnishers. I really had no choice to but to build one and try it for myself.-OldTony

First time trying to make my own air knife

These things have always amazed me. Simple minds, right?I was just going to try to replicate the straight one, when I thought ... would it work if it were round? Everyone knows round knives are the handiest!

Video Quality on Large Screens?

Just curious... anyone here watch these videos on a big TV? I'm trying some different settings for bitrate etc., hoping it looks better, but today's videos look ... different to me somehow. Not as sharp? Mushy?

Upgrade? Speed Nut for the TORMEK

Making a few 'upgrades' to the Tormek. Really ... one upgrade and two accessories I thought I'd make myself.

Secret Santa: Closing the Loop with Xyla!

Wow... time got away from me! My apologies. Check out Xyla's clever gift!

Merry Secret Santa and Happy New Year!

Sorry for the delay, folks, have been travelling. In case you didn't get a notification from YouTube, this year's secret santa round robin happened yesterday.More importantly, though, I want to thank everyone for their support and wish everyone a very happy and more importantly SAFE holiday...

DIY Welding Butt Clamps

Title says it all but I just wanted to take this opportunity to apologize: in hindsight, I could've gotten a LOT more butt jokes in there.Hope you're all hangin' in there!XOXOldTony

CNC'ing my own replacement part

Fixed the boy's fishing net. Thought it'd be nice to have some company and fired up the camera. Hope you enjoy following along!

How Gas Springs create Constant Force

Not the video I expected to make, but got QUITE a lot of question in that over-center video. I think they're worth talking about. You?I have to cover some basics in the beginning so we're all talking the same jive, hopefully it's not too boring!Love ya! -OldTony

Welder Winners!

Today is try-to-be-happy-for-someone-else-day and seemed fitting to formally announce the winners.

Superficial Deep Dive into Over-Center Mechanisms

Greets folks!! Hope everyone's doing .... pretty okay at the very least! This video is about over-centers (latches, clamps, you name it). I've got a couple in the can coming soon but next vid will be welder winners. Sorry for the delay! (still love you real-time, though).-OldTony

Arbor Press Mods & Tooling

This has been long overdue and I've finally welcomed my press into the fold by giving its own stand in the shop. Standard ratchet mod & some simple tooling to get me started. Enjoy!

Who Wants A Welder?!

Now's your chance!I wanted to make this Patreon's only. I won't put it in writing, but we all know who I love more. :) Unfortunately, that would make this whole adventure against the law. That's my understanding anyway.If you're playing, Good luck!

Who doesn't love Parallel Clamps?!

It's Maker's Secret Santa again! Make a gift, get a gift! This is getting harder and harder! Merry Christmas / Happy Holiday / New Year, one and all!

A Fixed-Angle Knife Sharpener To Call My Own

Can't tell you why, but I've always wanted to try this!

Quick note about the Welders

Hi all! Quick couple of things about The Welders. I'm cleaning up the machines and getting them ready to ship. Realistically it'll probably be a month before they've been checked over and ready to ship to someone. HTP has graciously offered to include needed accessories. They would have ...

All-in-one MIG/TIG/STICK? Revolution Thoughts

I teased this a few videos ago & have had a chance to get to know HTP's new multiprocess welder. It gave me feelings; my wife is jealous.Enjoy!

TOTALLY unnecessary Sharpening Jig

But you know what I say? So what. :)Deep down this has always bugged me a bit, but that's for me an my therapist to work through. Hope you're all doing well and... ENJOY!

DIY Toe Clamps

just a little video for the drive home. just kidding. pull over.I've wanted to build my own toe clamps for a long time. Didn't quite turn out as expected but... all's well that ends well? Enjoy!

Saw Chain Grinder!

Who among us can ignore the siren song of a grinder? I can't.Still learning, but figured this might be good excuse as any to chat! If anyone has any tips/tricks I'm all ears. Thanks everyone, hope you're all well!

Ball Nuts!

The Y axis on the Maho mill has been in bad shape and fixing the ballnut/screw has been long overdue.I took a swing at rebuilding it and missed. But what doesn't kill us makes us stronger right?Hope you enjoy following along!

About Milwaukee's new cordless pruners

Okay so maybe I shouldn't have made this video, but needed to get it off my chest. I don't need most of the tools Big M makes, but this one hit a little close to home. :)

Cheap Collets

I'll be the first to admit it... I lost track of where this video was going and it turned into a bit of a rant. Sorta. Was going to trash it but figured what the heck. :)Hope you're all doing well and staying warm!

Making Hollow Ground Screwdrivers

Greets all! Sorry for the radio silence, I didn't expect to go this long! Also my video skills might have picked up a bit of rust, i could NOT get this edited down to 15 minutes. Hope you don't mind.Merry Christmas / Happy Holidays / Will catch up on comments and more videos soon!Big kiss & ...