nightshiftmodeller posts
Posts: 1285
Files: 10372
HD pics
Hey friends, here are some pics with washes, streaking, speckling and staining applied :)I finished the video on Saturday, so today I'm about to start with some chipping!
Grimy
Well, I decided to make the most out of that single bottle of DAK wash and here's the result. I spent a good amount of time today thinking whether I should do this or move on with the chipping. But before I talk about it, I want to welcome all new Patrons and say that, as usual, I'll be send...
Early video
Workbench toooooour https://youtu.be/lbYlDNO4rtE
Both kits are here
Alright, the Mk IX arrived the other day. After looking at the contents I'm tempted to build it completely because the amount of detail is just incredible compared to Tamiya... but then again, if the metal fenders won't fit... and also, as we know, paints can make even simplified details pop...
Finally some enamel stuff
Hey friends, so I finally got the Crusader washed.Well, in fact I also applied a grey filter on it, just two light layers to blend the black camo with the sand tone a little bit. Then of course I had to give it several hours to dry which slowed me down a bit (it's ideal to apply a filter, let...
I just can't stop shopping
Hey friends, something arrived today, but it's only a part of what I need!It's strange how I'm constantly getting in the mood for a certain type of armor... First the Rutscher + Tiger, now Crusader and Valentine πBut anyway, the point is that I decided to finally build a specific tank...
HD pictures
"The overspray is strong with this one."- Darth Sploder 2020But I'm not too concerned about it! I'm actually very happy with the outcome, and even happier with those pics. The video won't do it full justice because the sand/black combo makes the camera sensor go all coo coo.If yo...
Ready for weathering
Alright friends, I got it all ready. Repainted the fire extinguishers into a dark vivid green color, also repainted the 2 flimsy cans and applied the markings. Your advice to make a sand colored strip on the right side was spot on, I think it looks very interesting! Finally a sealed everything with ...
Ready for varnish
Well, I think all the initial painting is done! I did the black camo yesterday and all the detail painting today, but I wasn't home last night so I wasn't able to post an update.So the camo was hard, just as expected, I'm not very good at airbrushing and no matter how thin the paint was ...
Early video
Finally, the base:https://youtu.be/WC5RQpTd6oM
More shadows, more lights
Exactly as the title says π The first photo is the result from today, photos 2,3,4 show the progression of each layer. Everything was painted with a mixture of 95% thinner and 5% paint. The air pressure was zero-point-nothing PSI π (about 2-3 PSI). Good thing about this ultra thin glaze is ther...
Surprise!
No distressing this time, post shading!The idea came out of nowhere and I already know it was a good call, because it's such a nice change. What you see is just a dark base layer + dirt passes + light "real" tone. Tomorrow I'll continue with more lights, shadows and stains. Some plac...
New toys
Hey friends, these new toys arrived today! The static grass applicator (can't wait to give it a shot, hope it won't give me a shot in return π) and a beautiful new rotating display.The old one which you've seen on the channel pretty much since the beginning was a cheap 10$ one from eB...
HD pictures
And here's the desert boy in HD!
Damn, stowage ain't easy
Hey friends, what a lovely weekend trying to figure out how to do stowage!I sat myself at the workbench last night thinking "alright, give it a two hours and it'll be finished" and by the end of those 2 hours I was only starting to get an idea where to place stuff π«Not sure what's...
Ready for stowage
Turns out there wasn't that much work left yesterday, just a couple of lead wires and several missing rivets and bolts. The only more complicated detail were those copper L profiles under the air filters, which felt like a throwback to a time when I used to scratchbuild half of the model from co...
Almost done!
Well my friends, the build is almost finished. I actually assembled the entire turret today. Yesterday I didn't do that much, just the external fuel tank mount and repositioned one towing cable. I just didn't like them so symmetrical, the tank didn't look "natural", so because I ...
Early vidyo
Let's finish this! https://youtu.be/m6qpzTYhhY8
Hull (almost) done!
Heeey friends,sorry for no update yesterday, I wasn't very productive and all I did were the headlight covers (which I made using another plastic jig which was made using the original kit part π - it'll be all shown in the video).So today I decided to do a lot more and pretty much finishe...
It was inevitable
We're making 0.3mm rivets now! I was hesitant with this decision at first because riveting does take time, but it'll be all worth it in the end. Also check those 0.2mm grab handles. British designers wanted to avoid welding as much as possible, so they decided to also rivet grab handles in p...
New phone - better photos!
Hey friends, it's been a pretty interesting weekend!First of all, yeah I managed to do some stuff on the Crusader, the hull is pretty much ready for all the smaller details - most of the large components are in place. I'll see what I can do about those stowage boxes tomorrow, the real ones w...
Tough stuff today
Hey friends, just one more quick update for today, I'll get back to everyone tomorrow morning :)Got the side skirts on, banged them up a little according to a few photos, also assembled the photoetched engine grill and added a couple more details on the back.Next up will be the front, or maybe t...
Early video
Let's take a look at that stowage!https://youtu.be/JI2M44irxkc
He's already standing on his own
Hey friends, so this is the progress from last night, already got the Crusader's running gear sorted out πThis time I only assembled the visible portion of tracks. This way they'll be easier to remove for painting (they're again dry fitted) and I'll have the upper run as a spare f...
This thing is π₯π₯π₯
My stoke levels are through the roof right now, this foam cutter is amazing!Don't want to exaggerate and say it's a game changer, but it'll definitely have a positive impact on all future bases, or as RubΓ©n in FAQ Diorama book puts it "decorated display stands" πOne important...
Huge mail call, next project and other news
Hey friends, with the final Sherman video completed it's time for some news πA bunch of stuff arrived over the past 3 days, but first the most important question:The next project will be a Crusader Mk III, again from Tamiya in 1/48th scale. Initially I wanted to paint it in a dull khaki green...
It ain't that bad when it's in HD
Hey friends, we're finally concluding the Sherman Easy 8 project with a final set of HD photos π It doesn't actually look so bad when photographed properly, also the video came out pretty well.In other news, the foam cutter just arrived, I bought a digital edition of the FAQ Dioramas book...
Officially done
Alright friends, it's time to call it a day on this one!I already started putting the video together, and it actually doesn't look that bad over there. We'll see what HD photos will do with it.After I fixed the Sherman and blended the lower track runs with the ground, I went for a quick ...
Pretty much done
Hey friends,so I pretty much finished the base. All that's left is to fix the tank to the road and make it "sit" with textured earth, just like with the T-90.What I did since the last post was to brush some Aqualine on the ground, then speckle some dry earth from Ammo - all the same colo...
Colors!
Hey friends, so I painted the base with basic colors. Most of the work was done with an airbrush and Tamiya paints - the road was done the same way as pre-dusting on the tank, and I'll be making it "muddy" with enamels, again, just like on the tank.Grass was airbrushed with the new XF-89...
