RPArchive posts
Posts: 387
Files: 1473
Realistic foam achieved! Sewer video update 6
Hi Guys!Another video update here, I've been a bit slow but haven't actually had to stop - I'm taking that as a win :)Rounding off a lot of the little finishing touches this week, so hopefully I'll be able to clear the desk and get some nice clean shots of the final resin pour :)
STL legal disclaimer - what you can and cannot do with them :)
Hi guys, So to make sure the channel is protected against piracy and misuse among other things I've got a legal disclaimer sorted for the STL files :) it's available in the Patreon about section, which is now linked in the tiers under the STL section, and is in a PDF in all MMF uploads.The t...
Foam and Floaters - Sewer Video Update 5!
Hi guys!Just another sewer video update, what I've been working on and discoveries through experiments, as well as where its headed and a look at some of my design sketches for an upcoming STL piece for the sewers to tie them in with the city tiles 😁Again, please let me know what about this f...
Sewers Video Update 4 - batch 3 done, plans for surface effects/STLs/final batch
Hi Guys,Let me know what you think again, as I say in it this one was recorded (today) while having a bad long covid day (though in a better moment of that day). I have I think kept the rambling to a minimum however, do let me know :)Matt
Video update tomorrow, another batch done :)
Unfortunately in no state to do one tonight, hopefully will be recovered tomorrow!
April Throwbacks Available Here and Uploaded To Myminifactory :)
Hi guys,If you're a patron at the start of the month (before today) you should have access on MMF, this will be updated again at the start of next month.If you joined mid-month, you can access through onedrive here for Questgivers and through this post for noble patrons, if you want them before ...
December and January STL releases fully uploaded, original wall and window release updated!
Hi Guys,Just a little one today, I spent a few hours this morning updating the files and folders for the December release (Adding the walls, which should now be the final versions), and january release (added the buckets etc, so its now complete!)I also updated the original wall release, the window ...
Why you want to make sure you buy the right KIND of OHP sheet :) Sewers video update 3
Hi guys,Just another no-editing update to give you guys some more insight into how things are going - I'm actually finding recording these easier than the text posts too!Again, let me know if this format is enjoyable, if I'm releasing too many, or anything else :)
Video update 2! Why you shouldn't use out of date resin, and how to fix uncured resin
Hi guys,As the last one seemed popular, I thought I'd document the latest issue I ran into in uncut video format. Let me know what you think again of this vs the old text updates :)
Video update! Trying a new format :)
Hi guys,UPDATED - uploaded to YouTube instead as many people seem to prefer it :)So I'm trying a new format here, it's completely uncut so it took the least possible time away from working on things - let me know your thoughts :)I also uploaded it natively on patreon though I can flip that t...
Little update :)
Hi guys!Little update while things are in progress - the resin stained green again in my follow up attempt yesterday, luckily I only poured one tile to be safe and remade a few spares with the last disaster!I'm running a retest now with much more sealing varnish and resin over the oil paint grim...
Massive resin update :)
Hi guys,Busy posting day :) I've had a lot to do to get this resin working so I've not been updating as often as I'd like - mainly because I didn't want to only post something ugly and 'in progress' 😅The main pictures there hopefully give you an idea of where I'm heade...
STL Throwback poll - April
Hi Guys!So, I get a lot of questions now about what the next throwback will be, and I don't really like arbitrarily deciding as it feels a little unfair, so I'm opening up a poll!For now I'll run off the pure results, but if we get a lot of repeats or some people feel one they want is ne...
December AND January 'thank you' STLs shared on Myminifactory!
Hi guys,So bit of a big post here! Most of the STL files for these releases are ready, and the ones left need a few tweaks but Fabio is on holiday, so I thought I'd release what I could to you :)Video wise, I've been making a lot of progress on resin, its taken a lot of experimentation as re...
Updated corrosion methods...
Hi guys,Just a minor thing that I'll drop in the video somewhere but is a nice update!I usually just use nihilahk oxide over nuln oil'ed copper or bronze, and rub off the excess, but that doesn't quite get the effect I want on smooth areas, and also doesn't leave a great deal of text...
March Throwbacks, and a big (ish) update I'd like to hear your thoughts on :)
Hi guys!ThrowbacksSo I've got February's throwbacks uploaded to MMF as usual, and as you can see the doors make a return for March! I know some of you were really hoping for them 😊 The link for nobles and above is HERE.And the questgiver link is HERE.Both will pop into your Myminifactory ...
It's a Long Way to Tipperary....
Hi Guys!Wow this is a lot of painting 😂 Not gonna lie, I underestimated this one a bit out of sheer enthusiasm to do this project all at once - it absolutely isnt necessary and you guys can probably do this one a chunk at a time and still get a lot out of it 😅ANYWAY, I'm currently finishin...
Updated ALL posts for Noble Rogue permissions 😂
Whoops! So I created the noble rogue tier for those who want to hide their username from videos, but I didnt realise I'd need to add their permissions to every post manually....fun! Thanks patreon 🙄😄All done now though, so if you are a noble rogue and found you didn't have access - now...
February Throwback, and a little preview :)
Hi Guys!So aside from the throwback downloads of the cages and stairblocks further down, there's also this little preview:As mentioned on discord, this is a multipiece end-of-sewer-flow grate that can cap off the edges of empty sewer flows of any width and make interesting place to corner enemie...
Myminifactory January throwbacks and collab STLs shared :)
Anyone who was a patron in January can now access that content on MMF as long as your email matches the one used on patreon :)The actual January release, as mentioned before has been delayed by the Christmas Covid spike I had - The budget is there, the STLs will get made, you will get access! it'...
More airbrush experiments
Hi guys!EDIT: good lord the phone camera messed up that image! Take my word for it, overspray on the left, none on the right 😂EDIT 2: Misunderstanding disclaimer - this is AFTER mod podge and black! you still need mod podge by brush :)Just a quick one here - these were both airbrushed. The one on...
Faster, smoother basecoating method - optional
Hi Guys!EDIT - you can thin the pro acryl 1:1 with airbrush thinner for the exact same effect, probably even more, the pigmentation is SO strong. this might actually not just be faster than craft paint, it might even POTENTIALLY be much the same price 😁Lots of priming done today, and I also manag...
Ridiculously large batch paint underway!
Hey guys!Just a quick update on progress - most of the crafting for 3 videos has now been recorded, just a few bits left to go before we're purely on painting before doing the resin!Faye is kindly helping me get these pieces all batch painted - as usual this is a bigger workload for me than you ...
Quick poll. STL collabs - yay or nay?
Right guys, So I thought I'd throw up a quick poll to judge interest, as it's quite hard to tell from post likes/views alone!TL;DR: Do you like the collab STLs* or not? Images of examples below!*Collab STLs are the minis by other creators, this isn't a poll on the RP Archive STLs, those ...
Free Mini - Bestiarum Collab
Hi guys,Just cleaning up my admin this morning now I have energy again and remembered Alexei shared another awesome mini with us, this time a piece of scatter terrain that I cant wait to find an excuse to use 😄This link is here and as usual it'll pop in your myminifactory at the start of next...
Added the 'Noble Rogues' Tier for those who want anonymity.
Hi Guys,I've been catching up on some admin now I have the energy and on the suggestion of a patron some time ago I've added the 'Noble Rogues' tier.This tier is identical to Noble Patrons, but your name will not be added to Youtube videos - you will maintain your stealthy anonymity!...
An actual, honest to god update! Good lord it feels good having energy!
Hi Guys!I've had more energy in these past 5 days or so than I've had since pre-Covid, so I've actually been able to move forwards significantly with the videos! 😁I've finished recording the crafting part of video 1 (sloped walls), and am moving on to video 2 (sewer flows) but I t...
Advanced Wall Stamps and Wall STLs Guide!
Hi Guys!The day is here! I finally managed to wrangle these pieces together, fully test printed and ready to go :) These have now been shared with Those who were patrons in the month of November, and will be Bonus throwbacks for this month (shared to anyone who is a patron currently at the start of ...
Noble Patron January throwbacks
Hi guysAs promised, here are the January throwbacks for noble patrons, they'll drop in your myminifactory at the start of next month if your email matches patreon :)
January throwback! PLUS December throwbacks uploaded :)
Hi Guys!Bit of a bad start to the week again but I'm struggling on! Lost most of my day today to covid* but I've rallied in the evening, got some test prints cleaned, had another design chat with fabio and got this stuff uploaded :)December's throwback will be the doors and mimic release...
