Patrefans
catandbeats from patreon

catandbeats

patreon

catandbeats posts

Posts: 573 Files: 580
catandbeats post Should you cut your rumble at 50/80hz? from patreon

Should you cut your rumble at 50/80hz?

Nope. Just listen to his own recent releases.

catandbeats post Piet's track from patreon

Piet's track

Have a play with drum grooves and use that rhythm to play rhythms in harmonics as well.. aka your pad can bounce with the track via an eq/lfo. Also, go nuts with the vocals.Mix wise it's fine :)

catandbeats post La Giang going for 2 from patreon

La Giang going for 2

catandbeats post Getting low end right from patreon

Getting low end right

Cut less on the rumble and you should be alright :) (Delete all the processing first and start from scratch with a good old sidechain that goes to 0 on the rumble

catandbeats post How to focus a lead and vocal (kulpa) from patreon

How to focus a lead and vocal (kulpa)

Understand the concept and the human ear and you should be good to make creative choices.1. Human will listen to rapid changes in the 1 to 3k area (think talking). 2. Mono is always upfront3. No verb=in your faceso automate it the other way around to focus on the lead :)

catandbeats post Sub bass, replace it or eq it? from patreon

Sub bass, replace it or eq it?

So, a couple of ways to do this but first trouble shoot:1. Is it a room mode or a headphone mode? If so, make a note and reference on a system you know inside out.2. Just play in a sine wav on the same note the "bass" would have been. Cut the bass do your thing to it and put the volume up ti...

catandbeats post anti phase button imager? ( from patreon

anti phase button imager? (

Audio circle jerks happen all the time. One slipped into the group so here is proof that you should not pick up tips as truths. Always take tips as tips and try them for yourself

catandbeats post Pieter's track from patreon

Pieter's track

The trick to get it fat is the 7.5 tape setting on the ag mastering thing from waves. It's an insta bump. This only works if the rest is set right too ;). Generally speaking it's way too much though so an eq might be needed.Cool glitch on the lead!

catandbeats post Matt's Kaytranada vibe with vocals from patreon

Matt's Kaytranada vibe with vocals

alright, so this is the same video as the video below but now with vocals.The sidechain compressor release knob is your friend. Get that bumping at the same feel. (Slower release). Please also choose how you want to play your snare, either on or off. Flange or straight. It's a little annoying, m...

catandbeats post Feedback Kris from patreon

Feedback Kris

Lot's of little tips and tricks here

catandbeats post Kulpa at it again from patreon

Kulpa at it again

"so, it's filthy and that is great. Balance out the mids sounds and maybe sooth the top end. I think your dj parties must be awesome

catandbeats post How to create your own kick? from patreon

How to create your own kick?

to create your own kick record your own kick. If you are layering kick samples together it's more of a mixing mindset. For that I tend to follow a "character kick" aka Mid focussed and then fixing the low end. Either via replacement or drum bus. For phase issues simply adjust adsr or swi...

catandbeats post Seamus - back off the limiter from patreon

Seamus - back off the limiter

so, all in all it's great as per usual. I have a feeling you might have pushed a limiter to smithereens as the kick disappears half way through the track.

catandbeats post Kulpa Thick AF from patreon

Kulpa Thick AF

So, that track slaps but might be a bit too thick haha. Turn down the bass/Sub or delete whatever is done on the master for that low end. Put the vocal back in the middle and keep on being awesome

catandbeats post La Giang True peak from patreon

La Giang True peak

You do not need True peak and keeping the ceiling at -1db is a good idea.Song overall as always is great.

catandbeats post Stefan's Guitar issue from patreon

Stefan's Guitar issue

Honestly the guitar is great. The rest of the track needs volume adjustments though. Please kill whatever was done on the top end of the drums. The groove is generally lower in the frequency range. Play back the kick and adjust levels from there.

catandbeats post Export stems for a remix from patreon

Export stems for a remix

1. Write down the track names, bpm and key. (don't forget your artist name)2. export 32bit (no need for dither)3. Export no more than 20 tracks (FX group instead of 20 single fx tracks )

catandbeats post Kristian's Euphoria track from patreon

Kristian's Euphoria track

Start of with EQing the kick so that it thumps instead of knocks. After apply "space" so that both the drums and the musical elements live in the same area. Last I would put the chords tighter and in the front.Good luck

catandbeats post Dyson Sphere Stab Remake from patreon

Dyson Sphere Stab Remake

As Julian pointed out. Basic wav with distortion, eq, imager, and wide delay in triplets

catandbeats post Headphone mixing question from patreon

Headphone mixing question

The amount of variables are just too high so just use your own ears :)

catandbeats post Piet's Hypno Track from patreon

Piet's Hypno Track

It's not too bad for the mix so good job on that. Bit of a tweak and you are there.Personally I am not a 1 note song guy as it's a tad monotonous (aka hypnotic). You can easily add a little variety for the people via a "release" to 7 semitones below after the break. At the end I also...

catandbeats post Kristian from patreon

Kristian

Vocals up 6db. Leave fx at the same level.Bounce needs to be added. So, I would honestly listen to "old" funk and apply that.More bounce to the ounce. Check the bass line moving around, guitar funking away, chorus with vocals with vocoder. Or just add one of those west coast lines. https://w...

catandbeats post Shamin doing more vocal work from patreon

Shamin doing more vocal work

Great job on the vocal work. That is leaps and bounds from the previous track.Drums/Bass sound cut in the low end. Please remove that and let the low end be nice and thick.Random sounds:Put them in a group and turn all of it more to the back of the room. That should sort it all out in one go.

catandbeats post Matt and Kaytranada from patreon

Matt and Kaytranada

Well, kaytranada has a different phylosophy so you have to adjust yourself to that to get that type of mix. Aka, simplicity and volume.

catandbeats post Seamus mixing more pop from patreon

Seamus mixing more pop

An outstanding job. I do not have much to add. Only the middle 8 needs simple drums and the girl "hey" is a little loud. For the rest spot on.

catandbeats post  Julian Meinke going from techno to pop from patreon

Julian Meinke going from techno to pop

pop is a different beast all together as there is less to "hide" behind. No cool sound design things but real instruments and vocals require a more balanced approach.Overall music wise the drums really can be thicker/louder. Little ghost note trick can help out easily on the snare. The piano...

catandbeats post Stephan Bodzin live set noise from patreon

Stephan Bodzin live set noise

It's white noise with a filter and ping pong filter delay

catandbeats post Wouter kicking ass yet again from patreon

Wouter kicking ass yet again

Well, you nailed it. Please start networking and doing gigs.

catandbeats post Konari and reverb and a tie in to Fabian from patreon

Konari and reverb and a tie in to Fabian

Just a bit longer and wetter. that's all :)

catandbeats post Fabian from patreon

Fabian

Focus is incredibly hard to do. I always like to think of "we will rock you". As long as you have a clear bass, drums and a "lead". Things are super easy after. Pads just fill the space warm or topy depending.

More Models