chriswarkocki
patreon
A plethora of new profiles!
🕑 Added 2019-07-06 06:32:16 +0000 UTCI've redone a bunch of the Pretty Profiles for the modern age. Fixed supports, fixed start gcode, and fixed a few other things.
Notice: These still need a few more hours of tests but they aren't super far off from their originating profile so prints will be successful as before just some refinements need a closer inspection.
1. Make sure you have the latest 3.7.2 firmware.
1b. If you have a Bondtech or Geared extruder please upgrade to the latest community firmware to get the best quality and experience. https://github.com/vertigo235/Build-Prusa-LA-15/releases/tag/3.7.2_MK3S_LA15_FINAL
2. Please make sure to enable 7x7 bed leveling in your settings menu.
3. Have fun and report back!
I've enhanced supports for bigger objects. These supports will be spongey and easy to remove BUT strong and won't break apart or fall over during the printing process like stock Prusa supports. A little heavy handed but they work for medium to big objects waaaay better than stock. For finer objects change the pattern spacing in the support to 1-2mm maybe smaller depending on how fine you need them.
I've removed the G80 N7 line which forced 7x7 mesh bed leveling from the start gcode which means you MUST go into the settings menu and enable 7x7 manually if you haven't. It's an archaic command from the first community firmware and isn't needed anymore.
Start gcode is altered to keep the nozzle 0.6mm from the bed this way the few users who experienced a defect in the bed from the radiant nozzle heat won't suffer this. I've yet to damage my own regular PEI this way but it's happened so now it's regular PEI safer.
Random other enhancements mostly to those using the Mosquito Hotend and any geared extruder. You'll notice the same quality with faster prints so enjoy!
