bigovereasy
patreon
The Gender Bender and Fusion 360
🕑 Added 2023-03-31 01:53:55 +0000 UTCHi everyone!
"Raging Bender" episode from Season 2, remembered by two images of Bender.
I was doing Bender in a white fur coat from this episode.
I made a tutu consisting of two parts (tutu1 and tutu2 🙂). Corsage after 3D printing, you need to cut with scissors along the contour at the back and glue, after putting on. The skirt is simply worn before the legs are inserted.
I wrote the text with a liner pen, but before that I covered it with aerosol varnish, in which case the ink does not spread along the print lines. After that, another layer of varnish. I've done the same before with the mesh on his mouth.
On the back there is a mark on both parts.
For this character, I also made a magic wand, the wig of which is worn through the antenna, "round" eyes and a hatch without a handle.
So, I added Fusion 360 files 🥳, these are the processed sources of the Bender project. I removed all the garbage, sketches, planes, turned off the story. The only thing is that there is no "unbendable" and chain. Perhaps these were separate projects. But in the stl folder of course there are these files.
Just don't forget that digital selling or publishing designs is only available to me.
I had previously printed Bender with a 0.3mm nozzle. Now I have printed it on 0.4mm
In order for his hands to be flexible, you need to set the "horizontal expansion" parameter -0.05mm in the slicer (negative value). do not forget to return this parameter to zero later
I roateded some objects in space, for the convenience of printing. I mean stl files. So too now there's Torso, without watermarks.
I also added a nut for his head1, This nut was definitely needed 😬.
For convenience, the nut has a hexagonal wrench hole.
The head will not be pressed against the torso, there is a small gap. The head will rotate freely.
There is enough about Bender yet, but I will return to him 🤖
I also added Cassette, without watermarks.
Also I added "Hard Goooose", without watermarks, with separate eyes.
I still need to deal with the Flexible Goooose. Rework Beak for 0.4mm nozzle
I also added another Mario Ring 🌟
