bigovereasy
patreon
Instructions on How to Assemble SpongeBob
🕑 Added 2025-02-11 00:51:55 +0000 UTC
Of course, first you need to print it 😉.
All parts are already oriented in space as required.
I marked the supports manually. They are necessary at the front due to the overhanging part.
I made three marks on the back, just in case, for the stability of the overall structure, and so that the back wall was stable during the first layers (if you look at the beginning of printing, this is not a very successful design element - an inverted triangle) you can use "brim".
Now, regarding the assembly
The model is assembled almost without glue, but a couple of drops will be needed: for the left eye and for the glasses. Arms, sleeves, legs, teeth and eyes are paired identical parts. There is a through-hole inside the leg that is slightly larger than the filament. I made it just in case you accidentally break his leg; it will be easy for you to repair it.
The teeth are marked so you always know how to insert them correctly.
The upper lip may have overhanging irregularities around the teeth area after printing. Simply run a blade after installing the teeth if it's noticeable 🙂
The body snaps onto the pants. Don't forget to remove all visible supports.
I didn't use red filament for the freckles, I used acrylic paint 🎨🖌️
Free download version, which includes a complete character 🧽 + 3 pairs of arms and several accessories.
SpongeBob 2.0🧽
https://cults3d.com/:2604587
https://www.printables.com/model/1187467-spongebob-20
https://www.thingiverse.com/thing:6948254
https://makeronline.com/en/model/SpongBob%202.0/154643.html
https://makerworld.com/en/models/1106153#profileId-1102019
SpongeBob's Treasure Chest 🪙
https://cults3d.com/:2604662
⚓
