howNOTtoHighline
patreon
How to Fix Bashed Bolts
🕑 Added 2021-05-22 13:30:01 +0000 UTCIf bolts are damaged or there are mistakes or in order to leave less trace, it can be nice to bury an old hole under the P of a new glue in you are installing. We tested in this video if "too much epoxy" was bad as the recommendation is just to use only a small amount. It is better to use the right size hole as it saves a ton of glue but we wanted to know if it was super good enough if you didn't. Spoiler Alert: Our tests showed it was fine.
All tests were done with Liquid Roc 500
Fixe Hely Tension (3/8" bolt in a 5/8" hole) 29.86kn, 30.30kn, 28.10kn - all bolts snapped
Fixe hely Shear (3/8" bolt in a 5/8" hole) 31.68kn, 30.36kn, 33.82kn - all bolts snapped
Double holes with 10mm Solid Leg from Bolt Products 52.38kn, 47.50kn, 50.86kn
For reference, carabiners break around 22kn.
➜➜Bolting Bible is free and at https://www.slackline.com/boltingbible
➜➜ 100% of DONATIONS goes back into the channel. All of our stuff is free. https://www.slackline.com/donate
➜➜SHIRTS AND MERCH & Discounts on your favorite gear https://www.slackline.com/shop
00:00 Intro 00:25 The concern 01:39 Big Holes 02:43 Double Holes 08:15 Gluing 09:18 Fixe Hely Shear 10:24 Double Hole Tests 11:49 Fixe Hely Tension 12:20 Conclusion 13:26 Ending
Live life high... safely. It's all FREE at https://www.SLACKLINE.com/
I just started a new channel! https://www.youtube.com/channel/UCHiQJ7Sp2jNC8JmkhDX7PJQ
