PoisonApplePrints
patreon
Princess Lantern
🕑 Added 2025-08-07 21:22:10 +0000 UTCApologies for the slightly late release tonight, printing took a little while, but our Princess lantern is now available from the downloads folder! it comes with 15 interchangeable panels (pictured at the end of the post) including Cinderella, Aroura, Mulan, Snow White, Megara, Elsa, Anna, Merida, Tiana, Rapunzel, Ariel, Pocahontas, Jasmine, Moana and Belle.
Just like our previously released Villain Lantern, it has 4 windows for the interchangeable panels and attaches to the roof using 4 corner clips that are also printable separately. It prints in 5 parts with no supports needed, except for the large roof piece, which should be printed with regular (non tree) supports, pointy side facing upwards. In order to stop the light from escaping dark filament is recommended, preferably with 3 or 4 walls instead of Bambu's usual 2 wall settings.
The lantern comes fitted with a wire groove in the bottom to lay flat on any surface and also has a hole in the top for easy hanging. It fits Bambu's led lamp kit 001, but for those who don't have the light an electric tealight holder adapter is also included that can be slotted into the base.
It can be permanently attached together using glue, which is optional (Mainly if you plan to hang it), but unless you plan to keep the same 4 panels do not glue the top panel border where the clips are as you won't be able to change panels afterwards. Assembly is fairly straightforward but if you need any help feel free to drop me a message below, instructions and photos of the HueForge panels have been included at the end of the post.
If you have any questions or issues at all let me know! Up next It's the start of a magical new month with a couple of curious characters for our collection and our next Disney diorama!
Panels & HueForge instructions
Cinderella
Swap Instructions:
Start with Jade White
At layer #9 (0.48mm) swap to Sky Blue
At layer #26 (1.16mm) swap to Black for the rest.
Aurora
Swap Instructions:
Start with Jade White
At layer #9 (0.48mm) swap to Cyan
At layer #21 (0.96mm) swap to Sky Blue
At layer #31 (1.36mm) swap to Black for the rest.
Snow White
Swap Instructions:
Start with Jade White
At layer #15 (0.72mm) swap to Red
At layer #35 (1.52mm) swap to Black for the rest
Moana
Swap Instructions:
Start with Jade White
At layer #9 (0.48mm) swap to Red
At layer #23 (1.04mm) swap to Sunflower Yellow
At layer #28 (1.24mm) swap to Black for the rest.
Ariel
Swap Instructions:
Start with Jade White
At layer #9 (0.48mm) swap to BambuLab Green
At layer #21 (0.96mm) swap to Green
At layer #38 (1.64mm) swap to Black for the rest.
Tiana
Swap Instructions:
Start with Jade White
At layer #9 (0.48mm) swap to BambuLab Green
At layer #21 (0.96mm) swap to Green
At layer #35 (1.52mm) swap to Black for the rest.
Megara
Swap Instructions:
Start with Jade White
At layer #7 (0.4mm) swap to Pretty Pink
At layer #19 (0.88mm) swap to Perfect Purple
At layer #37 (1.6mm) swap to Black for the rest.
Moana
Swap Instructions:
Start with Jade White
At layer #9 (0.48mm) swap to Red
At layer #23 (1.04mm) swap to Sunflower Yellow
At layer #28 (1.24mm) swap to Black for the rest.
Jasmine
Swap Instructions:
Start with Jade White
At layer #6 (0.36mm) swap to Baby Blue
At layer #15 (0.72mm) swap to Royal Blue
At layer #23 (1.04mm) swap to Black for the rest.
Elsa
Swap Instructions:
Start with Jade White
At layer #12 (0.6mm) swap to Turquoise
At layer #22 (1mm) swap to Cobalt Blue
At layer #35 (1.52mm) swap to Black for the rest.
Anna
Swap Instructions:
Start with Jade White
At layer #9 (0.48mm) swap to Magenta
At layer #21 (0.96mm) swap to Hot Pink
At layer #30 (1.32mm) swap to Black for the rest.
Rapunzel
Swap Instructions:
Start with Sunflower Yellow
At layer #6 (0.36mm) swap to Jade White
At layer #14 (0.68mm) swap to Indigo Purple
At layer #33 (1.44mm) swap to Black for the rest.
Pocahontas
Swap Instructions:
Start with Jade White
At layer #9 (0.48mm) swap to Yellow
At layer #17 (0.8mm) swap to Pumpkin Orange
At layer #32 (1.4mm) swap to Black for the rest.
Belle
Swap Instructions:
Start with Jade White
At layer #8 (0.44mm) swap to Sunflower Yellow
At layer #15 (0.72mm) swap to Pumpkin Orange
At layer #20 (0.92mm) swap to Black for the rest.
Tiana
Swap Instructions:
Start with Jade White
At layer #9 (0.48mm) swap to BambuLab Green
At layer #21 (0.96mm) swap to Green
At layer #35 (1.52mm) swap to Black for the rest.
Merida
Swap Instructions:
Start with Jade White
At layer #4 (0.28mm) swap to Slime Green
At layer #24 (1.08mm) swap to Serpent Green
At layer #37 (1.6mm) swap to Black for the rest.
Comments
PoisonApplePrints
Thank you! they're part of last month's releases so they're still available if you sub to the Hakuna Matata tier which gives you access to the current and previous months downloads folder
Lann Mandrago
These are fantastic! Are they still avaliable, part of the welcome, or able to purchase? Or where they part of paterons exclusive only thing. I am going to sub soon.
PoisonApplePrints
😂 that's awesome!
Lee Dunkeson
Absolutely love this one. Even my neighbor has asked for one. :P
PoisonApplePrints
Yup exactly the same so both sets of panels will fit
Keri Parada
awesome! is the lantern the exact same as the villain lantern?
