Evan and Katelyn
patreon
We hit some snags with our rose project
🕑 Added 2024-02-27 14:59:50 +0000 UTCHey y’all! We wanted to update you on the resin rose because we hit some snags. First off, we tried to CNC a hole in the base so we could insert a light, and the hole was so off center that it busted through a thin edge of the particle board base… whoops. Honestly though I think it’ll be ok since we can just paint it all black.
We also had planned to leave the rose in the pressure pot for extra long since it was in an ice bath to slow down the curing and prevent thermal runaway, but we realized oops we can’t actually leave it in there TOO long because there’s a bit of exposed stem at the top (that we used to hold onto to suspend it) and that’s a weak point for deterioration! So we decided to demold it after 9 days and cross our fingers. The stem was getting a little brown but nothing too bad. And the rose itself… well it kinda looked like Chunk 2: aka ghostly.
Now we sorta expected this, because the only time we’ve avoided the frosty, ghostly look was with Chunk 1 where we had warping in the resin due to thermal runaway. So we decided to go ahead and move forward at least for now and top off a final layer of resin to seal the stem.
We’ll see if it all comes together in the end! -Katelyn
Comments
Evan and Katelyn
Ah interesting! We'll reach out if we have questions and want to try that in the future :)
Ariella Coler-Reilly
As a wet lab scientist, I'd still advocate for chemical preservation before submerging in resin. It actually seems really easy to just place the rose in a vase of 10% formalin instead of water for a couple days before it goes in the resin. A plant with a stem like this should be way easier than a pumpkin because the rose will infuse itself via capillary action using its own vascular system. And I'm happy to answer any questions you may have about working with formalin. IMO it is much easier to be safe with formalin than with epoxy resin, so you'll be fine.
Harmony Dyer
I'm so excited to watch the video and u both r so awesome 😎
