Dan
patreon
Exclusive for May: Special Ops Frog
🕑 Added 2023-05-02 23:16:01 +0000 UTCBig Thank you to all who voted on this special character! Had lots of questions about making accessories and removable pieces...but for printability and to avoid little tiny parts that would be fragile, I opted for a true Print-in-Place model.
I beefed up the joints, changed the angle and shape of the head, changed the eyes and added several details including gloves, a pack, knife, watch, and binoculars.
Printed successfully at 50% and I printed 3 colors with a layer change just after the feet, and on the binoculars. So for you folks with single extruders, there is a great option to pause the print and add additional colors :)
I have also added the multicolor painted files (3mf) for Prusa and Bambu.
Photo 1: Stronghero Galaxy Glitter Black: https://a.co/d/hPSeTjX
iSANMATE Rainbow (matte): https://a.co/d/95m2L0j
Photo 2/3: TTYT3D Fast Changing Rainbow https://a.co/d/aOPbVbo
Photo 4: TTYD3D Yellow/Green rainbow: https://a.co/d/c6EHStO
Please show off your photos when you get them done! Cannot wait to see what everyone comes p with :)
Happy Printing -Dan
Comments
Pat Caton
Mine printed perfectly! And after painting it.... whew, it looks great. I might have to print it super big also!
Which version? I did the 3 colour 3mf file
Nic Wilson
I printed it three times on two printers and the back leg failed each time and its not adhesion, not sure what the issue is I did not investigate it
Thank you for your reply. I haven't seen this happen before that's why I asked. It's still amazing just the leg is the same on all 4 that were on the plate. Thanks for the hard work you put into all of these
Dan
I found on the bambu that if adhesion isn't great and there is any little issue, like a part just pops free slightly...it can have repercussions on other parts of the print. I think because it moves so fast, it affects other areas. I printed 10 mini gnomes and watched as it lost a total of three over about 10 hours. additionally, it did a layer shift because it hit one of the parts so hard it knocked the belt. So I think it could be something like that? If you scrub the layers, you will see the model is not the issue.
you already know imma make it big🤠
Has anyone else had an issue with the back leg not printing right. I loaded it up on the x1c did 4 of them on the one plate, one was purge into infill. But 1 of the back legs are stuck together on all 4
Dan
The files are in this post right below the pictures
Where do i find the stl file?
Dan
Neměl by to být problém se souborem. Viděli jste nějaké problémy, když jste to krájeli a drhli přes vrstvy? Mohl byste poslat fotky na flexifactory@gmail.com
vytiskl jsem si jich 8 abych měl co nejmenší strátu materiálu při vyflusání ale zrovna jsem zjistil že má pravou zadní nohu slepenou u všech. zatím se mi nepodařilo odlepit. jen by mě zajímalo jestli to je chyba má nebo je to v souboru. tiskl jsem tvou variantu na Bambu 3 barevné.
PROTONORD
Printed several of these at an event this weekend. White pla and had people paint them 😄
Jason
Is there any way to get a remix of the original frog with the new pupil design?
Printing this on a Bambu XC1 Carbon WOW love that you even colored it.
Karyl
OMG.......OMG.....speechless!!
Printing now at 150% in ODG. You know, you should rename it too SOG Frog
