Dan
patreon
Bonus: Flexi Factory Mini Skeleton for Keychains, Magnets and Earrings!
🕑 Added 2024-09-27 21:24:48 +0000 UTCI have been wanting to beef up the joints and make a mini version of my skeleton for a long time.
As you may know, the flexi Skeleton was my very first Flexi, and although it is possible to shrink him down, his joints got way too small and fragile to make him a mini. This one works great at almost any size!
I made 3 versions...
Magnet version
I put magnet slots in the head and hips. This way, it holds on tight to magnetic surfaces, and is also easy to pose. Simply super glue in 6x2mm refrigerator magnets. Here is a link: MAGNETS
Keychain version
Use this one for keychains, backpack hangers, Halloween decor or earrings (scale down to 60-70%. I used a .08 layer height for these)
Regular version
This one is just great as a toy!
Print tips and Info:
BONUS DOWNLOADS are HERE!!! https://www.patreon.com/posts/bonus-files-here-88548096
STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.
I print with 3 walls, 15% infill/gyroid, .12 or .16 layer height for quality. Earrings are printed at .08
As usual. make sure you have good adhesion. I always use a glue stick
Gradient PLA works well with this model: I have a comprehensive list of Filament I use here: https://www.amazon.com/shop/flexifactory
1st/5th photo STLs are 100%: Ziro Fast Changing Tropical
2nd photo STL is 256%: I HIGHLY recommend this pla for large decorations or sturdy toys : Amolen Yellow Feldspar
3rd photo STLs are 65%: Printed in : Overture Rock PLA
4th photo STL is 100%: Printed in: Ziro Fast Changing Meadow Mirage
3MF photos are printed in your favorite green, yellow, blue and red pla!
Happy Printing -Dan
*Please consider tagging @flexifactory/ #flexifactory in your social posts so I can see your amazing prints! AND make sure to share in the private Flexi Factory discord :)
Comments
Dan
Wow. I would love to see it if you can send a picture on the Discord or to flexifactory@gmail.com
Jason C
Well I wanted to share about our fun results! I've printed these skeletons as small as 50% reduced and enlarged it up to 425%. Talk about awesome! Just over 14 inches tall! Super fun to print!
Dan
The full size version is one of the downloads above in the post :-) I do have the older version which is much linkier and larger, and that one is available with the 40% off code if you want it. This is the beefier version. In terms of the magnets, I'm not sure if I'm going to do versions of set in magnets. With everybody having different machines and having to figure out when to stop them, what size to use Etc, it makes sense to add a modifier in the slicer in my opinion. But let me think on a little bit more and see if there's an easier way to make it for a broader audience.
Chris Gilroy
Two things, (great files by the way) Could the magnetic version be modified so that we can put the magnet inside, we could then make a hold at the appropriate point? Am I being silly, but there is no link to a full size version?
