MysticMesh3D
patreon
Nintendo Switch Game Holder Attachment (75% Scale Mini Crate)
🕑 Added 2023-07-17 16:54:57 +0000 UTCNintendo Switch game holder attachment for the 75% scale mini crate!
Features: 15x Nintendo Switch Game slots
The MM3D Mini Crate is a compact storage solution that offers a stylish and functional way to organize and store your small items.
The Mini Crate's versatile size makes it perfect for storing an array of small items. Whether you need to keep your collection of craft supplies, electronic components, jewelry, or any other tiny treasures organized, this crate has got you covered. With its well-thought-out dimensions, it easily fits on shelves, desks, or countertops, optimizing your space utilization.
Printing the Mini Crate is a breeze as it has been designed specifically to be printed without the need for additional supports. Simply load the 3D printable file into your preferred software and start the printing process. Thanks to its clever engineering, you can enjoy a seamless and hassle-free printing experience, allowing you to bring your storage solution to life in no time!
Comments
Marquis
I am having trouble around the handle area, gets choppy in the square openings around the handles. I have tried a few different things to get it to print cleaner but it wont. the rest of it prints fine and all my other prints go fine so idk what to do
Matthew Moscato
You can scale the crate or the insert in your slicer by +1%
Marquis
I made this today, the insert is too big. It is SUPER snug inside the crate, once it would go in, no way it could come back out again. What can i do about this? I didn't change anything at all about the file
Matthew Moscato
I print these at 10%-15% infill
Adam Boyko
Hey! What infil do you recommend
Matthew Moscato
If the print is lifting up from the build plate you are experiencing an adhesion issue. When I'm experiencing adhesion issues and I make sure the print bed is properly leveled, I make sure that I'm printing at the correct temperature depending on which filament/print bed I'm using, and I make sure that my bed is clean (I use isopropyl alcohol to clean the print bed). If you are still experiencing adhesion issues you can try using a gluestick on the print bed after having cleaned the bed.
Lacey Freshtilldef
Hi! Ive tried to make the crate in 50% and 75%. Im having a issue where the prints are lifting up on the left hand side! I have never had this problem before so I printed the Chinese take out box just to make sure my printer is calibrated and no issues! Any help is much appreciated! :)
Da_Brat_13
Hi, made this as my first ever print. Came out looking amazing, just curious if there is a file that makes the game cartridges fit a little more snug so it doesn’t fall if the crate is knocked over.
JC3dprints
For those on Etsy shop, what you guys use for categories?
Matthew Moscato
This is for the 75% crate attachment
josh jordan
Your description says 50% but this is for 75% right
