sandsuna
fanbox
【2024/11】Polling | 投票
🕑 Added 2024-11-26 14:29:20 +0000 UTCBack to the labs! Poor Duty Boy was so close to having a sequel (ó﹏ò｡)
This time, the theme is "Tentacle + confined environment (vore)"! I already have great ideas for how I want to execute this (⁄ ͡⁄°⁄ ͜ʖ ͡⁄°⁄ )
Below are the vote accumulation statistics:
回到實驗室啦！可憐的值日生差點就能有續集了
這次的主題是「觸手 + 狹窄的空間（丸吞）」！我腦中已經有很好執行這個主題的點子了 (⁄ ͡⁄°⁄ ͜ʖ ͡⁄°⁄ )
以下是目前票數累積的統計：
1. 【Part-Time Job】 - 39
2. 【Be Quiet!】 - 45
3. 【Newbie】 - 9
4. 【Our Toy】 - 0
5. 【Accident】 - 0
6. 【Character Setting | 角色設定】 - 34
7. 【Watch ＆ Learn】 - 5
8. 【？】 - 23
Our Toy (Part 14)
【2024/11】Our Toy (Part 14)
✨Part 13: https://sandsuna.fanbox.cc/posts/6864125 ✨Part 12: https://sandsuna.fanbox.cc/posts/6190470 ✨Part 11: https://sandsuna.fanbox.cc/posts/4964340 ✨Part 10: https://sandsuna.fanbox.cc/posts/4009857 ✨Part 9: https://sandsuna.fanbox.cc/posts/3588142 ✨Part 8: https://sandsuna.fanbox.cc/p...
✨Our Toy (Part 14) is out! It's a big load, be sure to check it out if you haven't already ( • ̀ω•́ )
✨Our Toy (Part 14) 推出啦！這次的量很大，還沒讀過的話可以看看 ( • ̀ω•́ )
Doodles | 塗鴉
✨Halloween Doodle! 🍎🐺
✨萬聖節塗鴉! 🍎🐺
✨As well as @Draugnut's birthday gift! Yes, it's feet only www
Don't you dare spoil him ( •ω•˘ )
✨以及 @爪爪 的生日繪！是的，只有腳沒錯www
你們可別暴雷他啊( •ω•˘ )
100,000 (Part 4)
【2024/08~2025/02】Process - 100,000 | 過程 - 100,000
Hold on hold on, don't leave just yet, I promise there's an interesting story of why this image was made, but bear with me as I take you on this longggggg journey of how we got here (¬ ͜ ͡¬) 等等等等等你先別走，我跟你保證這張圖會誕生是有原因的，但過程有點長，所以請聽我細細講解 (¬ ͜ ͡¬) Where it a...
※If you're not aware of this project, you may read about all the details of this project in the post above!
※如果對這個企劃一無所知的話，有關這個企劃的各種細節都寫在這篇文章裡了！
✨Communication hasn't been smooth to put it very mildly. We are trying to discuss how the design on the backside should be printed. The Manufacturer often take days (sometimes an entire week) to reply to our enquiries, and their replies often don't answer our questions, which is quite frustrating to say the least...
The photo you see above is one of the samples they sent. There's a clear issue where due to the thickness of both side being lenticular material, it creases the folder when you open it up and we're discussing for a solution to fix this.
✨簡而言之，跟廠商的溝通很不順利。我們目前在討論背面設計的印刷該怎麼執行，但廠商常常花好幾天（甚至一個禮拜）才回覆一封信，而他們的回覆時常沒有回答到我們提出的問題，真的很磨人耐心呢…
上圖是他們寄來的樣品之一。可以看到如果兩面都用光柵材質印刷的話，資料夾會太厚，導致打開時會留下明顯的摺痕，這個我們還在討論解決方法中。
✨Another issue we're trying to resolve is the see-through issue. Given that the back's design is dark gray, this is something we must take into account.
This project has dragged on for wayyyy too long, and their ineffective replying speed and the reply's quality isn't helping. I'm very sorry to keep you guys waiting, but I really want the best possible outcome for this project (›´ω`‹ )
✨另一個我們正在嘗試解決的是穿透性的問題。考量到背面的設計是深灰色，兩面的顏色很可能會互相影響。
這個企劃真的拉太太太太長了，他們的回覆速度跟品質真的有點。很抱歉讓你們等這麼久，但我真的很希望最後出來的品質是最好的 (›´ω`‹ )
✨On a more positive note, the cards to write on have arrived! Despite the inevitable miss-alignment, the golden foil still looks very very cool!! (,,>ヮ<,,)
✨好消息是用來手寫的卡片終於到啦！雖然有些不可避免的偏移問題，但這個燙金看起來還是超酷的啦！！(,,>ヮ<,,)
Card Sticker / Metro Card | 卡貼 / 悠遊卡
✨This is a small side project of mine, I wanted to try turning the Ġrapes portal into a card sticker for future giveaways. The two stickers are printed by two different manufacturer. As you can see, the one on the right has a much better clarity, which I'm quite happy with despite the long wait time.
✨這算是我做好玩的小企劃，我想把 Ġrapes 傳送門做成卡貼，看未來有沒有機會送讀者。左右兩邊的卡貼是由不同印刷廠印的，你可以看到右邊的卡貼比左邊的清晰非常多，即使他讓我等了很久我也覺得品質挺好的。
✨Now, on the top is the good sticker you saw earlier, on the bottom, I found a manufacturer to print the design on the actual metro card we use on a daily-basis. Which is very cool despite it not having the cool laser bling bling effect XDDD
✨現在上面你看到的是稍早介紹過的好貼紙，下面的則是我找到了能直接印在悠遊卡上的印刷廠。這卡真的能用，雖然沒有酷炫的雷射閃閃效果，但還是很酷XDDD
✨This is what the back of them looks like. Yes, the good sticker's manufacturer doesn't provide an option to print on the back qwq. I might choose to stamp my logo on the back if I choose to give these away in the future!
✨背面長這樣。沒錯，那個好貼紙的印刷廠沒有在背面印刷的選項qwq。如果未來要送的話，我可能會考慮拿印章在背面蓋logo！
I will be focusing more on my doujin next month, see you guys in the next monthly progress update! (*ฅ́˘ฅ̀*)♡
我下個月打算把大部分的時間都放在本子上，下次的進度報告見啦！(*ฅ́˘ฅ̀*)♡
https://forms.gle/wzQhBUU8Kjg2LAKU7
Comments
毛哥/毛太
可惜~讓他休息幾天，以後搾更多///
Sand Suna
好耶！歡迎參加投票 (๑•̀ㅁ•́ฅ)！
Sand Suna
是喜歡機械/觸手榨精題材的壞小孩呢( ง ᵒ̌∀ᵒ̌)ง⁼³₌₃
Sand Suna
右下角的小tips絕對是為了學術用途寫的，跟插畫絕對沒有關聯(„ಡωಡ)（？？？
Sand Suna
可惜這次因為主題的關係，雀斑黑肉應該是不會出場，讓他逃過了一劫( •᷄ᴗ•́)
调皮的孩子
而且忘记说啦~万圣节的贺图好甜呐，是orbi和值日生嘛~说起来值日生红脸会不会和右下角的小tips有关系咧˶╹ꇴ╹˶
cang31051080
终于搞定邮箱可以投票了（😢
nuo-xi
好耶，是Accident！沙沙的这个系列总能精准戳中我的XP≡ω≡
毛哥/毛太
終於等到實驗室(雖然更好奇雀斑黑肉正太的本名）！好期待雀斑黑肉正太能有多一點患難見真情的互動/////
Lion
當成意外收穫吧😋我是覺得很棒就是了，反正沙沙做的不論什麼都很棒🎉
Sand Suna
我家人也是這麼說的，他們說如果我不指出來的話一般人大概只會當設計的一部分wwww
Sand Suna
雖說慢工出細貨，但這企劃也拖了快半年啊啊啊 ･ﾟ･(つω`ﾟ)･ﾟ･
Sand Suna
看來是個xp高度重疊的讀者呢(〃ﾟ3ﾟ〃)💕 下個月本子要多加油了⁽⁽ଘ( ˙꒳˙ )ଓ⁾⁾
Lion
偏移問題剛好看起來像微3D感（？）
Hagiel
慢慢來不用急 XD 慢工出細貨喇～
调皮的孩子
好耶，Accident终于获胜啦~谁能不喜欢触手咧！真的沙沙的这个系列每次都能精准的戳中xpദ്ദി(˵ •̀ ᴗ - ˵ ) ✧ 100K企划慢慢来啦~磨刀不误砍柴工！慢工出细活值得的！ 顺便再一次期待沙沙的本子嘿嘿(？沙沙的本子嘿嘿嘿)
