matmire_makes
patreon
Bonus: Raccoon Fridge Magnet!
🕑 Added 2024-08-16 22:22:28 +0000 UTCHey Everyone!
I've posted the bonus Raccon Fridge Magnets. It includes both Glue-In version and Captive magnet versions (see note below).
Cheers!
Matt
Pictured models printed in... ***
Polymaker Starlight Mercury
Ziro Aurora - Silk Tri-Extrusion
CLICK HERE to Download from the pinned "The Hub - Info and Current Download Links" post
3D PRINTING SETTINGS - Magnets
*All magnets use 10mm x (2.3mm up to 3mm) magnets like These On Amazon***.
- 0.16mm layer height
- 3 walls with a 0.4mm nozzle (could do 2 walls with a larger nozzle.)
- 10% Lightning infill (lightning infill is great for these because it keeps the weight down and only creates infill where needed. Keeping the weight down helps the magnets be more effective.)
- 5-6 bottom layers (gives a little extra strength to the magnet attachment area.) - If your printer struggles with bridging, you may need to add support inside the magnet slot. Give it a try without and see how it goes.
*While it may be possible to safely drop the magnets in without pausing the print, if you are using a faster printer or printing many magnets at once... it would be best to add a pause to your print. I suggest pausing close to the layer where the magnet slot is nearly done, but not covered (see slice image above). This is fairly easy to do in most cases, but be aware that some printers do not support this option via gcode, and must be paused manually. Please research your printer and slicer if you are unsure how to do this. To add a pause to prints in Cura, follow this Guide. To add a pause to prints in Bambu Studio and Prusa Slicer, follow this Guide.
*NOTE, be cautious when using steel nozzles for captive magnets, the magnets may want to grab hold of them. I did not find this to be a problem when using a magnetic bed surface in tandem with the steel nozzle, but it's something to keep in mind.
CLICK HERE to Download from the pinned "The Hub - Info and Current Download Links" post
***As an Amazon Associate I earn from qualifying purchases.
Comments
Marti Reusch
Will these ever come in .3mf? I'd love to see them precolored
