matmire_makes patreon

Early Release: Tarantula!!

🕑 Added 2024-08-24 02:25:17 +0000 UTC

Comments

MatMire_Makes

It can be purchased from my public Cults3D or MyMiniFactory shops. Remember to use the 50% OFF discount code that is listed in the "Hub" post.

Apryl Schescke

Where can I find this spider at

Hero Electronics

I tried a few times with this model, failed and now I'm back here to seek more info. I am throwing in the towel on the tarantula. You're an amazing artist and quite a good engineer, but this one seems way more trouble than it's worth.

Jessica Hill

Printed one for our version of a Flat Stanley. The kids can’t wait to see the adventures of Bob. Wish there was a way to share pics.

MatMire_Makes

I use Bambu Studio because that’s what most of my customers will be using. I have heard great things about Orca, but I’m probably not the best person to ask about the benefits.

Jeff Herrmann

Hi Matt, just curious, do you use Bambo slicer or Orca? Just curious. I’m happy with Bambo but have never tried Orca and wondered if there are any benefits over Bambo

Jeff Herrmann

Wow, that’s genius Matt. I am just getting ready to start this guy. I’ve never seen anyone come up with that technique for tolerances! Guess that’s why you’re one of the best!

Magpulx720

McGybeer has a cute red panda

Jamie Robinson

I had that same issue but I believe I caused that when "breaking them free". I'm going to reprint him and be more careful this time.

Matthew Vorndran

I have had many requests for a red panda, I think the raccoon body could be use and just change facial characteristic on the head. Just a idea.

NightOwl

Printed the multicolor version on my p1s and it looks amazing. Some of the joints on some legs are a little too loose though so it won't hold the position I put them in, even with the end positions they should click into. They snap into the body just fine though, and it's only 2 or 3 of the legs that are loose. Gonna try reprinting one of the legs and see if it was just an issue with that particular print.

MatMire_Makes

That's odd. This might be easier to troubleshoot over email, if you can send me some pictures of the body ball joint and abdomen socket. Both separately and how the abdomen sits when the ball joint is inserted. Also any details you can provide about what scales you used or settings were adjusted to tweak the tolerances. You can send them to me here... help@matmiremakes.com Thanks!

MatMire_Makes

Did you by chance watch the video about the tolerances and the option to clip the sockets? The link is in the second paragraph of this post and in the included ReadMe instructions PDF. Maybe give that a try.

CHRIS CORBETT

I am having issues as well with the leg joints being to tight and snapping. printing on bambu standard file. printed previous model no issues. Any suggestion

Paige Renshaw

So I watched the video, read all the info, I’ve been printing for multiple years and completely understand tolerances. I did the test models and tweaked the tolerances to fit that but then when I printed the actual tarantula, the legs all fit fine and work as expected but the butt piece doesn’t snap on at all like possibly it’s so loose it doesn’t connect to itself at all? I’m just confused as to why it’s so significantly more loose? Or am I missing something? Obviously I used the same tolerance settings for the entire model. I have not printed a raccoon yet so I do not have that to compare to.

Matthew Vorndran

I have printed the Tarantula twice, the first print all ball joints cracked and split the bottom on the of the body. The second print only two off them split at the bottom of the body. Should I add more bottom layers or could you raise the openings for leg ball joints higher up on the body?

MatMire_Makes

Hm, are you slicing the 3MF or the STL files? I know the recent version of Creality Print has added multicolor options. Is it slicing in multicolor or single? It could be also be a corrupt gcode export. Were all three print attempts from the same slice or did you re-slice each time you tried? If the same slice export, I would try re-slicing the job. This might be easier to troubleshoot over email, if you want send me an email at help@matmiremakes.com If you can send me the gcode export, that might help show what’s going on.

LowHonor

I’m using a k1 and their slicer. Your other prints work good on my printer, just this one has the issues

MatMire_Makes

What printer and slicer are you using? If you are slicing the multicolor 3MF in Bambu Studio or Orca Slicer but printing on a non-bambu printer, the printer will stop at the time of the first color swap because it won’t understand that gcode. If that’s the case, you should import the STL files to print, and not the Multicolor 3MF.

LowHonor

I tried to print the tarantula three times and each time it caused my printer stop printing after the first layer. I did check with other prints to see if this happens and it’s only with this tarantula.

Johnathon Hooks

Printed two of these but the ball joint is so small it breaks when inserting or moving around in the body.

Sean

Ok so not panic-worthy lol. Thank you!

MatMire_Makes

They are the same for the most part. The front and back pairs of legs have slightly less bend to the "foot" part, but it's not a huge difference.

Sean

Besides slight texture variations and mirroring, are all the legs the same? I guess length would be my only concern here. I printed 3 at once at 75% scale and when I went to pop them off, everything got mixed up.

MatMire_Makes

Hmm... were they all using the same filaments? It sounds like the tolerances are pretty tight on your prints. Did you by chance watch the video about the tolerances and the option to clip the sockets? The link is in the second paragraph of this post and in the included Instructions PDF. Maybe give that a try. If you can send me pics of where the layers are separating, here... help@matmiremakes.com

MatMire_Makes

Hmm. Did you have this issue with the Raccoon head (if you printed it)? It is basically the same joint. All of our test prints held pretty snuggly. It's possible that some filaments could print with looser tolerances. You could try scaling the abdomen down a few percent to get a tighter fit, or it may help to do a filament flow calibration. If you want to troubleshoot further, you can email me at help@matmiremakes.com and maybe send pics along with your printer setup, slice, and basic settings.

Tony Rothweiler

Hey Matt, I absolutely love this model. I'm in the process of printing a set of 9 painted to look like a Mexican red knee tarantula. One caveat though - as a tarantula hobbyist, the eyes bother me. I know most people probably won't mind so much, but is there any way you can do an alternative design with a more realistic cephalothorax? Tarantulas have their eyes mounted on a small bump on the front of their cephalothorax, in two rows of 4 (with the top row including larger eyes that wrap around the "bump"), and they're altogether probably only about 1/6 the size of what you have on this model. If this is too much work I understand, but if there's any way you can create something a little more realistic, it would be so very appreciated! I am planning on selling some of these at exotics shows and I know if anybody cares, it'll be the people there. Thank you!

Aaron M Spradlin

My abdomen keeps coming off the main body pretty easily. I don't have any issues with the other models.

Nicholas

Can you please separate the multicolor files? Bambu only allows me to separate them into 'parts' with messes with the whites of the eyes and separates the brim from the butt.

Kristina Veitch

Just made it and I love it

Greyson Postell

Yes I would love this!

Dominic Catenacci

Very cool! Just an idea, you think you could make a mallard duck?

MatMire_Makes

It sounds like the tolerances are pretty tight on your print. Did you by chance watch the video about the tolerances and the option to clip the sockets? The link is in the second paragraph of this post and in the included ReadMe instructions PDF. Maybe give that a try.

TsukiEmiri

I just finished printing I’m not a fan of the joints. they are warping the plastic turning it white and brittle this wasn’t a problem with your crab design, I much prefer the durability of that design.

Lynsie Burgtorf

Love this print but the layers separated when I inserted the legs. Printed 6 total, all on Bambus and same issue on each one.

Amanda stephens

Perfect! Thanks for pointing that out!

MatMire_Makes

I would suggest watching the video in the second paragraph of this post and try the clipping the sockets. If that doesn’t work try using the test prints to find a leg scale that fits better.

Amanda stephens

I tried printing with silk pla, and it isn't strong enough... I'm gonna print with a stronger filament next to see if it works better

Adam Krukar

Came out perfect with zero issues.

JulieandHenry Zimmerman

I have an issue with this print. The ball joints broke when I tried popping them in and when I tried pivoting them. What should I do?

MODOKO.CL

Amazing!!!!!!

Randall M Wiley

LOL you sound just like me, flex the heck out of the plates and use plastic razor scrappers. Been doing the same thing myself, heck lost a few models to this plate because had the temp set too high and was printing with Silk PLA.

MatMire_Makes

I'm still pretty new to the sliceworx plates. I heard recommendations of both 40 or 45C, so I went with 43C, haha. They stick super well. Really, flexing the plate seems to be the best way to release the prints. They don't come off from cooling like other PEI plates. I would never use any release agents on these, as that would defeat the purpose. I also use plastic razor blades to knock off the purge lines and such, so that I don't mar the surface.

Randall M Wiley

Hey Matt watched the video and seen you have the same plates as I do, can I pick your brain as to what temp do you have yours set to for easy model removal?? Mine just stick to the plate, heck down 40 on PLA temp and still sticks like tomorrow.

MatMire_Makes

Great!

Sammi Carter

ty ! he finished print i watchedd vidio cause legs didn't want to go in one broke then after video snipped sockets and the rest were perfect! he is adorable! ty for him !

MatMire_Makes

The socket should cup the ball and hold it in place. It sounds like your printer is creating very loose tolerances. Did you do any scaling to the print, and if so, did you scale all of the parts the same amount? I would suggest checking out the video linked in the second paragraph of this post. If that doesn't help, send me an email at help@matimiremakes.com with pics and your printer, slicer, and basic settings. Maybe I can see what might be causing the tolerance issues.

Sammi Carter

so i printedd this but there is nothing to hold the legs in the sockets? its a hole and a ball nothing to grip with?

Laura Lough

Yes!!

Joyce Carter

What I really mean by that is... the objects.... Like the eyes, or maybe even a tongue! That way, I can print them in full color, and glue them into place, without having to print the entire thing in full color, if that makes sense! I love your designs! They are so realistic!

Cult of Tofu

Yes! Thank you!!

Sean Harr

YES. Thank you :)

MatMire_Makes

It has 8 legs and two pedipalps (which look a lot like legs, but technically aren't).

Rocio Mondaray Arias

Love it but... Shouldn't it have 8 legs???

LTL

This is AWESOME was doing search for T and spider flexi!!! Search no more.

Pleebus

Oh dear god. I need to do this tonight.

MatMire_Makes

Pieces generally drop to the bed like that if you split to "objects". BTW, if you are in the Discord, we were just discussing this 3MF parts topic and I showed how you can use the objects panel to separate things out.

Mike Sprague

When I originally split the 3MF into parts, everything separated just fine - except the eyes, for some reason the glints fell out

MatMire_Makes

Joyce: Splitting by color in the way that I think you mean is very dependent on the style of the design. My models are generally too complex and detailed for that to be a practical option.

Mike Sprague

I didn't know you could do that, I'll check it out, thanks!

MatMire_Makes

They are already split in the 3mf, if you look at the objects panel. You can select the parts individually, delete them, and use that to create separated 3MFs if you want.

Terry Joyner

This is so stinky cute!

Joyce Carter

I love it when designers split the colors apart! That way you can do full color without tons of added time / filament waste.

SGarrett

I'm a tarantula keeper. This is awesome!

Wynsome

You rock, I really like spiders.

Mike Sprague

Love it...one file request?? It'd be cool if the colored (3MF) parts were separate - that way you could print a plate of legs And print a few body/abdomen parts on another. I tried splitting them, but the pupils/glints in the eyes fall to the plate.