matmire_makes patreon

Early Release: Skunk!!

🕑 Added 2025-01-25 00:00:38 +0000 UTC

Comments

EpicLayer

Has anyone experienced a loose snap fitting with the tail? I printed the multicolor 3mf with 3 walls + 15% gyroid infill on a Prusa XL. Actually printed a second tail to rule things out. May try another one on my Bambu. Considering adding a drop of CA glue.

MatMire_Makes

For help, please direct message me or email me at help@matmiremakes.com Please be as specific as you can about what printer/slicer/settings you use and what the specific problem is that you are having. Including pictures can help, if possible.

Barb Rodriguez crafttopia 3d LLC

HEY MM MAKES I TRIED PRINTING THE SKUNK I DOUNLODED IT BACK IN JANUARY AND I JUST TRIED PRINTING AND ITS NOT WORKING RIGHT EMAIL AT Favthings453@gmail.com

Brandy Venditti

I had the same problem it’s mainly the tail. Several of the parts are not flush against the plate so you need supports for the tail or to figure a way to get all the parts flat on the bed. Only half are flat. The rest of the skunk works well. **looks like v3 fixed this issue.

Jude

Would you consider putting 3MF profiles up? For orca or Creality slicer. As I’ve just bought myself a K2 plus. Unless somebody can point me in the right direction for doing the multicolour prints on this printer. Your three MF STL’s are the reason why I bought this as I think they’re just amazing.

Neil Porter

Love the skunk, the rescue near me has just got a skunk in and requested this model. having a few issues with the tails, third link down have had to add supports as its collapsing

Suki

I love this guy! He is going to be my new favorite! Right after the platypus. I love your work. A friend in FL said your platypus reminded him of a Pangolin. I think he was referring to your artistic style after looking the creature up. It's cute! Another idea for your pile (I'm sure you have a stack of ideas and requests) of future possibilities. It must be related to an armadillo, only from Africa and Asia. The African one is cuter I think.

Mikenna

Love this little one! Got one on the printer now, I'm beyond excited to see how it turns out!! 😁

Julie Pehotsky

Gonna print this in green for st. patties day! (cannot wait for the baby version too! I know you gotta have one planned!) <3

JUST A 3D PRINTER

Pls make some 3d print models of some animals with heads phones especially the mmmini ferret, I would love to have one.

MatMire_Makes

It’s sort of a limitation of the way the slicers create the layers. I can adjust the thickness a bit more, but it may not get rid of it completely. The translucency/transmission distance of the white filament plays a roll as well. A more opaque white will show less of the underlying color.

Brian Banks

I downloaded version 2 and it's a little better but still having the black bleeding through.

Vinnie Simonetti

Lemur at some point please

MatMire_Makes

This should be fixed in the new v02!

Anne Gutendorf Hendricks

Me too! But I thought it might be because I purged to infill.

Marti Reusch

I've got this issue too!!

Kevin Sahm

I have an issue with my print that I want to see if anyone else experienced. Right across the bridge of the nose, it's almost as if there's not enough thickness to hide the under color. For example the black from next to the eyes bleeds under the white across the bridge of the nose. 2/2 printed show this defect.

Nicole Perkins

I guess 3rd time is a charm. It’s printing fine now

Kristen Holman

Love it! I am dying for a Sugar Glider!

Nicole Perkins

Let me try it again. I made some adjustments. Including switching the filament. I live in the northern states so humidity is an issue sometimes

MatMire_Makes

Hi! Most often prints fail due to bad bed adhesion. Make sure the bed is clean and leveled properly. Aside from that, there are so many variables it can be hard to troubleshoot in the comments. Send me an email with as many details about your printer, slicer and settings as you can. Pics can be helpful too. You can send them to help@matmiremakes.com