Christine
patreon
[Archived] Deer Skull Dice Tower
🕑 Added 2024-04-04 15:18:08 +0000 UTCHiii!!!
This tower was on my to do list ever since I released the deer skull dice box, and I'm so glad I finally got to make it. The tower is on the small end, prints quickly and can run a full set of dice all at once! Also prints great without needing to use MMU
It prints in 3 parts, the base, the skull, and the antlers. Everything prints without supports!
I have also included a 3MF file for the skull.
The black skull in the pictures is the skull variant which is just a little different then the regular one! I dry brushed it really quickly with some white paint and I really loved the result
Please use a brim for the antlers. I also recommend to slow down your small perimeters. In bambu It will be under the speed tab and the setting is called "small perimter thershold" I set mine to 6.5 mm. This will slow down the smaller areas and result in a cleaner print while also reducing the chance of them getting knocked off the plate.
Everything should fit in tightly together, so glue is not needed. If you are having a hard time fitting the antlers into the skull you can carefully use the deburring tool if you have it and shave a bit of the peg, or use sand paper to sand it. The skull should "click" into the base and lay tightly against it, the skull should not fall off the tower even if the tower is turned up side down, if your skull falls off then it wasn't pushed into the base properly.
If you have any issues with anything don't hesitate to send me a message or reach out to me on discord! I am always happy to help!
Ope Edit:
a quick youtube short on putting everything together ---> Youtube Short
This model is no longer on patreon! You can purchase it separately from the below links:
![[Archived] Deer Skull Dice Tower](https://img10.patrefans.com/storage/12/px/sh/563145-019e8263-5539-7364-a523-0582abfc6b79.png)
![[Archived] Deer Skull Dice Tower](https://img10.patrefans.com/storage/11/ev/iz/563145-019e8263-5543-7ac9-9a06-c01c05bbdae9.jpg)
![[Archived] Deer Skull Dice Tower](https://img10.patrefans.com/storage/2/la/dr/563145-019e8263-5547-7904-a5be-07b6e6c222e2.jpg)
![[Archived] Deer Skull Dice Tower](https://img5.patrefans.com/storage/3/qq/xm/563145-019e8263-5549-7a6d-9d97-cbac8cb89605.jpg)
![[Archived] Deer Skull Dice Tower](https://img10.patrefans.com/storage/1/dt/gu/563145-019e8263-5583-72df-b3fc-6b1d040db69d.jpg)
Comments
Christine
Hii!! are they just a little too big or a lot? if they seem to be just a bit too big it’s likely just a tolerance issue. I recommend using a deburing tool if you have it and slice off the edges around the peg, if not then just sanding it down should help! For the next print scaling the horns down by 0.5% to 1% depanding on how much bigger the horns are
Cross3d
Hi, I just downloaded these files this week and printed the alternative skull and the horns both at 100% and the horns seem to big to fit the holes in the skull. is this just something odd on my end?
Lisa
Ok, Thanks!
Christine
Hii!! This has been since fixed! Just redownload the zip 🥰
Lisa
What was the solution? Wondering cuz I started to print today and noticed the 3MF at 90% is also the same measurements as the STL which says 100%
Natalie
Yes! I have tried everything but. No idea what I can do unless I do supports?
Christine
oh no! are you using a brim?
Natalie
My antlers keep popping off my printer near the end... I tried the glue trick. They're so cute and can't wait to not mess them up.
bryanmichele
Question: I import the Skull.3mf file and it is at 90%. I import the antlers and they are at 100%. So do the 100% antlers fit the 90% Skull? And if I reduce the size to I keep at the 10% difference between them? Thank you
Garb-n-Gizmo
people loved these at the last show!! But a lot of people wanted just the skull.
James Besaw
I love it!! My own short uploaded. And now I have to find this dice box
Christine
Thank you!!
Mike of Steele
You do some great work 💕, love all your designs. This goes great with the deer skull box. Great package!
Nita New Mischief Creations
My kiddo is hoping for a crow skull to swap out as an add on. 😁 We love it!
Amber Mcclanahan
Yep agreed creepy cute is always a thing 🩷
Christine
yaaay!!
Nombies are better than Zinjas
I absolutely LOVE this, its so cool! I already have a few people interested in them, especially the skulls. Amazing!!
Christine
Hii!! it’s in the speed tab on the left side panel! you can search for “small perimter threshold” using the little magnifying glass icon right under where it says advance
Waiyi Choi
Alanna Elias
I'm so excited! I love the Arcadia dice tower and was really hoping for another one from you, this looks amazing!
Sheila Sjeu - Mooi3D
Wonderful job! I love dice towers. However most models are loooong prints. Thank you for really thinking this through. I'll put this one on tomorrow.
Rebecca Shearn
This is one of the few prints I just need to hand paint
Catrina Payne
I’d love a dark cat skull!
Faustino Avendano
Never thought I'd be a dice tower and one of the prettiest ones I've seen 😍
Maggie Thill
Love it!
Timothy Therrien
also agree on more DND and gothic / emo / dark themed items :)
Jamie
Love this!! I agree on needing more spooky/witchy stuff 🤗🖤
TinaJ
Love it! I agree with Laura, we need more spooky/goth/dark/halloween/macabre pieces 🖤🖤🖤
TopFurret
Love this spoopy lil dice tower!
Alison Farrar
Love 🖤 Love 🖤 Love
Boredom With Jenn
So cute! Thanks so much for all you do❤️❤️
Laura McDermott
This is great! We need more spooky stuff
Ian Ryan
WOW!
