Christine patreon

[Archived] Console Container plus keychain

🕑 Added 2024-05-02 17:57:11 +0000 UTC

Comments

Christine

Hii!! sorry edit message! I would scale the Lid Up by 1-2%

Christina Bolch

Hi!! Love this design!! I just printed the lid and the case at 100%, and the lid doesn't click in at all - it just slides right back out. Any tips? Should I scale the case down slightly? Making these for party favors for my son's bday party this weekend, so any help is greatly appreciated. Thank you!

Regina DeLisle

Hi! ❤️ I'm using bambu software and a bambu A1 mini, I tried messing around with layer patterns (?) and it helps a little but it's mostly lines around the buttons and eyes 😞

Christine

hii!! what slicer and printer are you using? There might be a couple things you could try!

Regina DeLisle

I just printed this and the z lines are showing a lot, I'm kinda new so I'm wondering if there is a setting to fix it? Or maybe pla silk isn't right for this?? 😭

Christine

yaaay!! That’s awesome!!

MB Prints

Update. Couple keychains and 4 containers sold pretty quickly

Christine

that sounds awesome!! if you have discord you can post it there!! the tolerances will increase as you scale models up for sure! If your wanting to attempt it again you can scale the lid 2% smaller then the bottom part and that should make it better!

Nita Schoonover

I wish I could post the pic lol. May or may not have been like over 200%

Nita Schoonover

I may or may have not made a giant one... The bigger you go the looser the lid is btw lol

Christine

Hiii!! try Closing your browser and reopen it, the make sure you expend the post, the link is a at the bottom of the post 🥰

olivia childs

i cant print this the zip file in not on the screen

olivia childs

i cant find the file so i can print this

Christine

Hii!! Thanks for letting me know! I’ve fixed it and you can redownload it from the download post 🥰

S M

Has anyone tried to print this at 150% no matter what I did the base was either faulty or didn't stick to the bed. I tried several plates and no luck. I have just put it back to 100% and it's printing fine. The lid was ok at 150% but not the back

Christine

sorry im not too sure what you mean, ill send you a PM 🥰

Christine

It’s gorilla glue! I find that it was a little bit too thick for this purpose thinner glue might actually be better haha

Robin Hebert

I printed it out but the blue in the corner showed through the pink. Help! Also if you print it all at once should it open?

Learical

What glue did you use in the video? I have an (expensive) acrylic glue but it's very watery and hard to work with.

Robin Hebert

It's so adorable. I used the colors pink, blue and purple!

Shei

Omg! Love it a 100 times😍🤭

Jennifer Bigley-Hobbie

I just made a keychain with glow in the dark! LOVE IT! Waiting for son to get home from school to give it to him!

Mawk

I will message you, I think we are a bit off here. I do love this design and will definitely be printing a lot of these.

Samantha Young

No problem!

Christine

The 3MF version has all the parts on it, you should be able to open it! I know it opens in cura! Just make sure that your slicing tolerance is set to “middle”

Christine

Didn’t know that! Thanks for the tip 🥰🥰

Samantha Young

BTW if you get residue left behind from super glue, use veggie oil to get rid of it. Speaking from experience lol

Mawk

Not necessarily blank, but that does provide options. I flat version with all the eyes, mouth and buttons integrated into it. I know that not everyone has an AMS but this can also be done with Z-hop (I did this on my Enders). I make a lot of light boxes where the light box has the details imbedded into the design, this would be the same concept where the first few layers have all the colors changes then the rest is a single color. This keeps it flat and lets some of the neat PEO/PEY build plates designs really pop.

Christine

ooh I haven’t thought about adding a blank screen! I updated the zip with a blank version, you can grab it by redownloading! Thank you for the suggestion 🥰🥰

Mawk

Got one printing now, I love the parts for the "face", but would also really like a flat version just in case the parts get caught on something and get ripped off. And scaling down gets a bit tricky with gluing things in place.