Christine
patreon
[Exclusive] popsicle magnets plus case
🕑 Added 2024-05-29 15:57:28 +0000 UTCSqueezing this small release in before the end of the month! I've had requests for magnet version of the popsicle, and I made them a little case to go in!
I've included two versions, one with cheeks one without, and a 3MF version.
The magnets are captive, which means that they don't need to be glued in and are inserted during printing. You will need to pause the print at layer 21 when using 0.2 Layer height, then insert the magnets and resume printing. Magnet size is 5x3. I have included this information in the magnet guide as well!
If you don't have a magnetic plate, please don't print this version.
This is a patreon exclusive release. Patrons can download it free from the patreon exclusives link in the download post!
-----> Current download post <-----
🤍🤍🤍
![[Exclusive] popsicle magnets plus case](https://img10.patrefans.com/storage/5/du/hf/563145-019e8263-4e91-7890-8f6b-29c0571ac3e3.jpg)
![[Exclusive] popsicle magnets plus case](https://img5.patrefans.com/storage/2/ai/xa/563145-019e8263-4e98-77dd-92da-8a39867d6ae8.jpg)
![[Exclusive] popsicle magnets plus case](https://img5.patrefans.com/storage/10/fv/zd/563145-019e8263-4ea2-7c51-8809-20da42d41fdc.jpg)
Comments
Kim McKenzie Knittig
I am trying a print with larger magnets in the case. Hope it works.
Christine
For sure! Go for it!
Harry Henze
Are we able to attempt to edit the file to try to put magnets in the holder?
Christine
🫶🫶
Amy C
Just when I think you can't out cute yourself you come up with this! <3
Christine
Its not unfortunately, its a bit heavy and would need a lot of magnets in order for it to stay put with the pops in it
Sarah Hovick
Is the holder also magnetic?
Jana Barroga
OK, I googled is the magnetic build plate the plate that comes with the new Bambulab printers just double checking
Christine
I believe all bambu lab printers come with a magnetic plate, you can test before you print by placing your magnets on your build plate to make sure they stick 🥰
Jana Barroga
do you have a link to buy a magnetic plate? I have a1, p1s and a1 mini
Christine
Hii! I used these https://www.amazon.ca/dp/B09CNJ4GN8?psc=1&ref=ppx_yo2ov_dt_b_product_details Just beware that this is an Amazon. CA link
Melissa Chamberlain
Super cute!
Paradoxal_Dinosaur
I love this!!!
Arch Vcx
Which magnet brand did you use?
Christine
If you have a magnetic bed the magnets will stick to your bed and should not stick to the nozzle regardless of what type it is 🥰 I printed mine with a steel nozzle!
Bethany McClure
Will this print with a steel nozzle or will that mess up the magnet ?
Julie Fernandes
Hmm okay, fair enough. I need to print these!
Christine
Its not unfortunately, its a bit heavy and would need a lot of magnets in order for it to stay put with the pops in it
James [bucklenshackle] 🇨🇦
ADORABLE!!!! Ok fine ill print a few hundred. :)
Julie Fernandes
Abso-freaking-lutely adorable. Is the case magnetic too?
Channie
Too cute!!
Andrewcooke
Thankyou for adding the layer that we need to pause it at it really helps
Christine
yep 🥰
Ellyn Stephens
Adorable! Do they fit in the case if they have the cheeks?
