Christine
patreon
[Archived] Yuna
🕑 Added 2024-09-11 21:28:38 +0000 UTCHiii!! Happy Wednesday!
Yaay im so happy to release Yuna today! Yuna is really fun to handle and have her curl up in the palm of your hand! Everything that is included in todays release:
🦊Yuna Flexi
🦊Yuna 3MF
🦊 Yuna Straight version and 3MF
Yuna was tested down to 50% however I don't recommend going smaller than 70%. I found the arms to stick a bit at that scale, wiggling back and forth helps get them loose again!
I included a straight position version so that more of them can be fitting onto the plate! This is helpful when printing the 3MF files as you get more prints for the same amount of waste, it is also helpful when you'd like to push more gradient changes from a gradient filament.
Please make sure that when you are editing the 3MF that you are NOT painting the eyes the ears with the paint tool. They are split to parts and painting them will create uneven paint lines. Instead please assign color to them from object list located in the left side panel.
Also if you are using bambu studio please make sure you are double checking your profiles as the 3MF will load a default A1 mini plate and settings.
Filaments used:
Red Yuna: Isanmate red orange matte gradient, Hatchbox Sparkle Grey, Ziro white pro
Grey Yuna: CookieCad Gray Ombré, CookieCad Pale Pink Elixir, Hatchbox Sparkle Black
Blue and Pink Yuna: Cookiecad Blue Ombré, Ziro Twinkling-pink, CookieCad Lavender Chip Marble, Ziro Starry Sky
As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision.
*This design has been Archived. If you were subscribed the month which this design was released then it will be free to download from your My mini factory account.
If not then it is available to purchase from the below links. Patreon License still applies to designs purchased separately. Make sure to use the discount code listed in the download post
🤍🤍🤍
![[Archived] Yuna](https://img10.patrefans.com/storage/8/rv/jt/563145-019e8263-411e-7d71-bd1f-9999b79a35a3.png)
![[Archived] Yuna](https://img10.patrefans.com/storage/9/jv/ve/563145-019e8263-411f-707e-9801-8561e3850978.jpg)
![[Archived] Yuna](https://img5.patrefans.com/storage/6/eo/kl/563145-019e8263-411f-7679-99fc-c6113ae60af8.jpg)
![[Archived] Yuna](https://img10.patrefans.com/storage/11/pi/xi/563145-019e8263-4121-7bfc-8b0f-e4cc267c7e67.jpg)
![[Archived] Yuna](https://img10.patrefans.com/storage/9/ay/ov/563145-019e8263-4122-7ffe-bd98-08c0e0cd99f1.jpg)
![[Archived] Yuna](https://img5.patrefans.com/storage/4/pq/ec/563145-019e8263-4123-7440-b9c4-cc5671f89258.jpg)
![[Archived] Yuna](https://img10.patrefans.com/storage/12/mt/yf/563145-019e8263-4123-783f-95f7-f3de9c13f82f.jpg)
![[Archived] Yuna](https://img5.patrefans.com/storage/7/fx/ao/563145-019e8263-4123-7e43-976a-2692169b85b0.jpg)
![[Archived] Yuna](https://img10.patrefans.com/storage/7/nd/gu/563145-019e8263-4124-71bb-be4e-9f28ba50ac63.jpg)
![[Archived] Yuna](https://img5.patrefans.com/storage/11/qg/yu/563145-019e8263-4124-7a1e-bc0c-6b57a6d5c942.jpg)
![[Archived] Yuna](https://img5.patrefans.com/storage/6/km/an/563145-019e8263-4125-710a-9480-c50ea394b66c.jpg)
![[Archived] Yuna](https://img10.patrefans.com/storage/12/yd/ky/563145-019e8263-412d-7da5-80b3-a2d7a019190b.jpg)
![[Archived] Yuna](https://img5.patrefans.com/storage/5/cf/ea/563145-019e8263-4147-7911-9d1f-7bb47f22ed1f.jpg)
![[Archived] Yuna](https://img5.patrefans.com/storage/1/hl/of/563145-019e8263-41ef-7057-bd60-7273cb0007cb.jpg)
![[Archived] Yuna](https://img5.patrefans.com/storage/9/zk/wp/563145-019e8263-41ef-75fc-9c80-82e809f32fff.jpg)
![[Archived] Yuna](https://img5.patrefans.com/storage/5/ve/rv/563145-019e8263-41ef-7902-b276-249a57c1845a.jpg)
Comments
Christine
yaay!! glad it’s sorted 🥰🥰
Chrissie Stern
I redownloaded the file and when I printed it again it came out perfectly. I don't know what happened. Thank you for offering help! ❤️
Chrissie Stern
Sorry I didn't send you a picture. I redownloaded the file and printed it again and it is perfect! I'm not sure what happened before. Thank you again for the fantastic designs!
Lee Harvey
I have been printing these on the bambu p1s using Ziro Matte filaments and isanmatte filaments and they come out perfectly as per the images above. Happy to share settings if you need
Christine
are you seeing the ridges in the slicer? Could you send me pictures of what they look like? You can send them on instagram @layersingreen, or through discord, or email them to me at Thesprouted@gmail.com
Chrissie Stern
I'm going to try redownloading the file
Chrissie Stern
Bambu P1S
Christine
There should not be ridges, it should look like it does in the pictures. What printer and slicer are you using?
Chrissie Stern
I made the straight and now making the regular and both have ridges in the forehead. It's that part of the design?
Melissa C Tillman
Ok thank you
Christine
Hii!! I don’t recommend going smaller than 70%
Melissa C Tillman
How small can any of your pieces be printed with out them getting stiff and not moveable
Arch Vcx
of course the cute one is cookicad :'( so expensive
Christine
yaaay!!!
Sandra Steiner
I printed this cutie right away - it turned out fabulous! I love it!
Jill Martin
Ya! Can't wait to print it now!
Sheila Sjeu - Mooi3D
Ah, sooo precious!
Miranda van der Zwaard
😍😍😍
Christine
No she will be going public in about a week or so
Ash Blakely
Is this an exclusive?
Kevin Smith
Awesome, thank you!!
Christine
She fits on baby kaidas rock stand!
Kevin Smith
Is there a stand or sculpt that you recommend to print with it that it can sit on?? (Kind of like the dragon and the egg)
James Besaw
I will definitelly be making one in elegoo red, for red panda colors
Lindsay Owen
Awesome! I scored photoshop through work, so I'll have a play around :)
Christine
I use photoshop express, but i don’t use a digital background just adjust the lighting! these were taken on a white backdrop with natural lighting 🥰
Lindsay Owen
Totally unrelated, but what program do you use to do your photos? Whenever I try to give my photos a digital background, it always looks terrible!
Gwendaelle
Merci pour cette création, juste adorable :)
Christine
yep! I wouldn’t go smaller than that!
Heather Cook
The straight 3mf loads at 70%, is that the size you recommended for the smallest?
ArticCreations
So so 😍 adorable. Good job. Love seeing what you come up with!
White Tiger Prints
I love her so much! Prepping her file now! I can’t wait to print her!
REDBAR
So cute!
