Christine
patreon
[Archived] Mouse Flexi and Tea Set
🕑 Added 2024-10-11 19:56:23 +0000 UTCHiii!! Happy Friday!!
I am a bit under the weather today as there has been an awful flu rampaging through our house but! I am super excited for this release, everything that is included:
π Mouse Flexi (articulated and sculp tail versions)
π« Mouse Flexi 3MF (3 color versions)
π A tea set: tea pot, tray, and a tea cup
Mice
I wanted to offer an option of both tails articulated and a simple sculpt one! The articulated tail has a new joint which makes it possible to print small but study enough that you can swing the mice by their tails if you so wish to.
The articulated tail mouse was tested down to as little as 50% with full articulation, however I would not print both versions lower than 80% scale
I recommend printing with 3 walls minimum
Tea set
The tea pot and cup at 100% fits 100% mouse, you may have to lift the articulated tail up over its body to fit it in.
When using Bambu Studio I recommend printing the tea set using the "Arachne" wall Generator. This will ensure even number of walls, the classic one tends to fill gaps which can cause uneven layers. I prefer using the classic for articulated models.
βAs with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervisionβ
Please make sure that when you are editing the 3MF that you are NOT painting the eyes and the inner parts of the ears with the paint tool. They are split to objects and painting them will create uneven paint lines. Instead please assign color to them from object list located in the left side panel. You can change the color of the eye shine or remove them by holding shift and clicking them in painting mode.
I believe that should sum it up! Let me know if I have moused anything!
This design has been Archived. If you were subscribed the month which this design was released then it will be free to download from your My mini factory account.
If not then it is available to purchase from the below links. Patreon License still applies to designs purchased separately. Make sure to use the discount code listed in the download post
My Mini Factory
πππ
![[Archived] Mouse Flexi and Tea Set](https://img10.patrefans.com/storage/5/kd/yn/563145-019e8263-396b-792e-b2a5-be90d7d7fd7b.png)
![[Archived] Mouse Flexi and Tea Set](https://img10.patrefans.com/storage/7/vx/is/563145-019e8263-396c-7b73-ab62-61b4a5da21b3.jpg)
![[Archived] Mouse Flexi and Tea Set](https://img5.patrefans.com/storage/6/hb/zd/563145-019e8263-396d-7d85-9094-665bb9bbf68d.jpg)
![[Archived] Mouse Flexi and Tea Set](https://img10.patrefans.com/storage/9/il/jb/563145-019e8263-396e-7f9d-a613-2090f19698dc.jpg)
![[Archived] Mouse Flexi and Tea Set](https://img5.patrefans.com/storage/4/uf/ig/563145-019e8263-396f-7b15-9ee5-459e80636283.jpg)
![[Archived] Mouse Flexi and Tea Set](https://img5.patrefans.com/storage/4/cp/zl/563145-019e8263-396f-7c0f-ae5e-18ebaf5aec7d.jpg)
![[Archived] Mouse Flexi and Tea Set](https://img10.patrefans.com/storage/9/qw/ru/563145-019e8263-3970-7e31-9b8c-dcd8b68a854e.jpg)
![[Archived] Mouse Flexi and Tea Set](https://img10.patrefans.com/storage/8/lk/cx/563145-019e8263-3972-7184-b41e-b80ebde131c0.jpg)
![[Archived] Mouse Flexi and Tea Set](https://img5.patrefans.com/storage/1/ha/bz/563145-019e8263-3975-7653-9798-c667402decb8.jpg)
![[Archived] Mouse Flexi and Tea Set](https://img5.patrefans.com/storage/10/jy/ct/563145-019e8263-3977-7d2f-bfac-a0db19506329.jpg)
![[Archived] Mouse Flexi and Tea Set](https://img5.patrefans.com/storage/5/cy/il/563145-019e8263-397f-7b19-a808-8a3b1c86d5e7.jpg)
![[Archived] Mouse Flexi and Tea Set](https://img5.patrefans.com/storage/10/an/dl/563145-019e8263-3994-763c-93e1-eac955a02d44.jpg)
![[Archived] Mouse Flexi and Tea Set](https://img10.patrefans.com/storage/6/zx/fm/563145-019e8263-399b-701e-8aae-99e42123c480.jpg)
Comments
Christine
Hii!! Welcome! not at the moment!
Autumn Jones
This was the model that make me click join here on Patreon, lol. Is there any chance of a closed teapot?
me
can you make a child's tea set I guess the only change would be to close the openings in the pots. I love this and ant to make it for my baby.
Christine
Hii!! I used polyterra cotton white, fossil grey, candy, and Polyterra PLA Pro bronze for the mice! and for the tea set i used matte sunlit petal gradient by ziro, as well as unicorn gradient by cookiecad
CJ
Do you have which filaments you used? Iβm pretty new to 3D printing and donβt know the colors yet π π
John Lauren Kaitlyn Jennifer Banks
This is a bit of a cheeky request, but would it at all be possible to get Christmas mice with little hats? I just think they would be so cute! Or Christmas hedgehogs?
Ripchi
So cute! Any chance you'll be offering one with a more natural looking articulated tail as well? A tail tapering off without a heart at the end? Maybe also make the mice be able to sit up?
Carusima Hikura
Can you please make a skunk as cute as this mouse? I just finished printing it with the flexi tail and it's absolutely adorable!
Ashley
Thank you! π I'll keep that in mind
Christine
When printing big itβs just about how good the cooling is on the printer due to overhangs being larger, scaling up is usually pretty safe but I canβt really say to what scale. It would vary between designs. I donβt quite remember to what scale I printed the big articulated tail one in the pictures but it took up most of the plate on my A1
Ashley
I know these usually say the smallest size you recommend printing at but is there a largest size, especially for articulated animals?
Christine
thank you!! Itβs sunlit petal matte gradient by ziro!
Morgan Witherspoon
I am printing the first mouse now!! What color filament is the gorgeous yellow teapot? I must have it!! <3 Feel better soon!
Bumpa Built
So cute!! Is there a keychain version? Maybe with a hole through the back? It would make a great ornament!!
LauraCampy
Of course!! β€οΈπ
Christine
Anytime! Thanks for understanding π₯°π₯°
LauraCampy
Thank you for your quick reply!! I definitely understand why, glad I asked π
Christine
hii!! I donβt allow the use of original pictures taken from patreon or digital listings, I will be adding this into the tier descriptions starting November 1st so it is no longer confusing!
LauraCampy
I have a question for you! I can't seem to find the answer anywhere. I never print the creative set (teacup and pot) am I able to share your photo when offering it up for sale?
Lana Spires
Get well soon, loads of rest and fluids!
Andrea Gress
This is adorable!! I LOVE the extra containers, baskets, tea pots, etc. It really sets your minis apart and customers love them!
Damon
Another great model. Thank you. Hope you get well soon.
S M
Would love to see more creative play sets like this. I so love the Guinea pig set and this new set. I have made some today and I'm in love. I think these will be great going into the Christmas season.
Miranda van der Zwaard
I'm in love πππ. Get well soon!
Tia Bradley
AH! So cute!
Christine
Thank you so much!! π₯Ήβ€οΈβ€οΈ
Lisa
I absolutely adore this π I'm worried I'll end up sounding too creepy with all my fan-girling but seriously, you truly amaze me all the time! When others are giving us repeats and recycled files you are thinking outside the box and treating us to the cutest items. Thankyou for being you! π₯° Feel better soon babes
Jennifer
Love this! Printing it now. Feel better. π
Pink Starburst
omg this is adorable, giving me alice vibes all we need is a cute cheshire kitty
SneakyFeetsCreations
OMFG!!!! I'M SO IN LOVE WITH THESE!!!
Dusk Reynolds
I literally squealed seeing the adorableness of them in the tea set
Rosieco
Omg, so cute!!
Rhya Hayes
Oh my gosh, I love them!!!! I would love a Santa hat version for a cute little Christmas mouse!
Lioness2000
Oh my goodness! How super adorable!
Yoriko Rayne
Omg adorable!!!
Justine Taylor
Thank you. And it is already ordered. I hadnβt seen a. Good yellow gradient filament yet so this seems to fit the bill. Thank you. Bonus I can order it in Canada.
Cathy
Adorable - get well soon
Christine
No worries feel free to ask whenever! Itβs Ziro sunlit petal as Lee mentioned π₯°
Kelley Quigley
These are so so cute!! Feel better soon!
Justine Taylor
Thank you for the reply. Love it!
Lee Harvey
Looks like ZIRO matte sunset petal to me as have same filament
Justine Taylor
Yellow I mean the tea pot the is also other colours
Lee Harvey
Amazing and thank you but more importantly hope feel better soon
Justine Taylor
Sorry the question always asked and I never want to ask whatβs the yellow filament? Love the gradient of it
Justine Taylor
Love this!! Adorable.
Ruth & Mike
Your brain is the best, how do you consistently come up with the CUTEST ideas?? LOVE β€οΈ π π. It's giving mad hatter vibes π
Daisy
Toooo cute!! Love this
Lauren Clark
AMAZING! They are the cutest <3
Diana
Adorbs πππ
Christine
Thank you!!
Christine
Halloween themed releases have already been released in the previous two months
Melissa Chamberlain
Oh my goodness! This is so cute!!
Jackie Cowen
I love them!! Feel better soon! π©·π«Άπ»
Cesar
Any Halloween stuff coming?
Sr Zombie
ππππ
