Christine patreon

[Exclusive] Clicker box Pony with Biscuit box

🕑 Added 2025-03-21 19:16:09 +0000 UTC

Comments

Christine

You’ll want to go into the box clickers folder and download the box clicker zip, the pony just has the biscuit box

Luis Toledo

Ok I was able to open the file, yeah! But I don't see the box with the flaps that are attached, not the hinged ones, I know those are from the kitty, bunny, pig, clickers. Anyone know where that box is?

Christine

Make sure you are clicking into the folders and then downloading and aren’t downloading it from the main folder page that had them all together, if that makes sense

Luis Toledo

Is anyone else having trouble opening the file for this one?

Muffina

Unicorn clicker? 😍

Christine

Make sure you are using the v2 version and yep you can scale it up 2%

Gene Smith Jr

Should I scale it up at all to have it fit on the switch? It will not go on at all. It looks perfectly normal

James Sullivan

Do you think we could possibly get a racoon and trashcan clicker?

Christine

i’ll be updating the files shortly but you just need to scale it up by 1% 🥰

Bratzer

I have tried the v2 but I will go back to caps. It seems to be impossible to get the caps on.

Mikayla Taskowitz

Would love to see more clickers in the future! These are so cute!

Radio Chicken

They're quite thick on the bottom and where the inner hole is where the clicker goes, from there up (about the last quarter of the box) its a normal edged box so its faster from that point onwards.

Sadi Alford

if the boxes are just straight up and down with flaps. what took so long? im waiting for my clickers to come in to print them

Kristin Coker

Could you do a unicorn one?

Leah Ditch

I did that too. But sometimes when I do this I don't have all the boxes printed yet so I just assembly line everything when doing them.

Christine

I’m testing to see if scaling the animals up a bit will work on making them easier to insert!

Christine

I realized that when printing the switch insert face down it’s going to add a bit of elephant foot to the first few layers which creates a tighter tolerance! I am testing to see if scaling the animals up by 1% will help solve this issues! I definitely recommend putting the switch into the box first and then pushing the animal into it!

Radio Chicken

I put the clicker into the box first, then push the animal onto it using the box to help hold it steady, V2 is a little tough, but it works well doing it this way, and doesnt hurt you. :)

Radio Chicken

I just printed 10 new V2 bunnies and boxes - yes they are a bit tough to push onto the clicker, but I had zero issues at all! The boxes take FOREVER to print and alot of filament (only thing holding me back from doing all the animals) .. but I also made 5 of the boxes with built on flaps, with 10% infill instead of 15 to try print faster - still works a charm and look great!

Leah Ditch

I absolutely love that you have combined the insert into the clicker top (bunny, kitty) as 1 piece but it's really hard. I love that cuz that means I don't have to glue anything...but I was wondering, do u think you could make a helper tool for adding the clicker into the animal, just pushing the X piece into the clicker hurts when u have to put ur finger at the other end with the cut off tabs. Maybe you could make us a square helper. Understand?

Fabio Chirico

Don't worry, Even in the new file download there are V1 of all animals (but not pony) 😊

ZrowFks

I agree Fabio. I have broken several trying to get them on the key switch (1/3 of the pony's broke). I liked the old caps. Unfortunately, I deleted V1 of the other animals

ZrowFks

Been having problems with the built-in caps on the clicker animals. It's a lot harder to attach it to the key switch. The piece on the bottom of the animal bends over easy. I think the separate cap was a lot stronger.

Christine

Hii!! It would help to troubleshoot if i can see the prints! would you mind sending me pictures of the box and the flaps? you can send them to me through instagram, facebook or email them to me at thesprouted@gmail.com

Christine

I see! Would you mind sending me pictures of the broken prints? You can send them to me on instagram, facebook, or email them to me at thesprouted@gmail.com

Vera's Arts and Dice

I am having troubles with assembling the lids to the boxes, does anyone else encounter this as well? If so what would be the best solution, scaling down the lids didnt really help and im afraid to scale to box to still fit a clicker

Ed Owens

We have a significant number of autistic kiddos that will most likely love the clickers. Please consider making a barrel (round) to make this more sensory friendly.

Fabio Chirico

Yes, I let my personal feedback as I've printed 4 bunny (V2) end 3 of them are broken after trying to mount clicker. With V1 I've not issue so I will print next animals using V1. I'm printing with bambulab P1S using settings you suggested. I've

Christine

Hii!! Thank you for the feedback! I have considered this as an issue as well! I have printed many caps in the process of testing and fortunately have not had issues with breaking any of them even when I was taking them on and off the switches, which made me feel more confident with not providing the glue in cap for future designs. Have you experienced the v2 breaking?

Fabio Chirico

Hi! Your job is wonderful! Just one thing about V2, the connector was more resistant in the previous version (printed separately) because now the top of it is printed in the air and even print doesn't need support, that makes it fragile. I will sure continue print V1 (but pony that doesn't has opportunity to be printed separately). I suggest to raise down bridge and left only 0,5cm (from base to top of connector) in order to minimize the risk of breaking that part during clicker mounting process.

David Lee

Is there a unicorn one already? just thought unicorn after seeing the white with pink mane:)

Christine

I’m sorry to hear about your week! I’m so glad that you like the pony!! 🫶🫶

Maureen Drynan

This has been such a hard week but this little pony clicker and biscuit really made me smile. I love all your creations but this one is hands down my favorite!

Radio Chicken

You know what would go with the biscuit box?? A Parrot! <3 I love all of these! Only done cats so far, slowly getting to bunnies then the others!

Maggie Thill

The ones from Pawpular Prints are also a perfect fit and don't have the metal leads sticking out from the bottom. They have four or five versions now!