Christine patreon

[Exclusive] Ducky Clicker

🕑 Added 2025-02-18 21:50:37 +0000 UTC

Comments

Christine

If they are hard to insert try to scale the cap and the ducky up by 2% and they should be easier to insert! I was actually thinking of going back to glue in cap because some are having a hard time with the combined version 😅

Muffina

are you planning on updating these clickers just as the other animal ones? They break very easily and are pretty hard to assemble (not every pla prints te same) but the new ones are excellemt

Christine

Hii!! scale the cap and the ducky up by 2%, you can also lower your flow rate if you are overextending which will also cause tolerance issues

Ghoti

Hi! The stem for where switch inserts into the body of the clicker is super hard to get the switch into. I had to spend several minutes carving out bits of plastic until it finally fit and even then I had to force it on with my entire weight to get it to even get on a little bit. Am I doing something wrong with printing this?

Manda Diehl

Was wondering if you are going to update these clickers as well and the hay? The new ones are so much better now that everything works and I don't have glue a bunch of pieces> :-) would be amazing. Thank you, I love all your files. :-)

Christine

Thank you for the information!! 🥰🥰

Audrey Roseberry

FIY: the switches for clickers are really easy to find. I've tested outemu from temu, the DrinKey from Temu too, the kailh box from Amazon.ca/.com and from AliExpress and they pretty much working the same. Outemu and DrinKey are less "loud" on clicking sound and smoother, but they are a lot cheaper too. I have bought, as for now, more then 500 switches from around 6 different brands/type/color and tested all. They are all good. My personal pref are the Kailh box black cause they need a more intense pressure and having a louder click sound that I love so much. Just don't stress with the switches, you have a lot of choices out there. So go print these tiny ducky clickers and makes them click 💛 Thank you so much for adding clickers designs I love your work and they are soooo cute 🤩

Dream Forge 3D

Loveeee this - we need more clickers!!! I have been waiting for a Canadian to do these! I need to scale my ducky down but everything is great so far!

Christine

hii!! Make sure you are pressing the ducky into the clicker all the way! you can also add a tiny bit of glue to the cap to make them stay in place better. Generally I would say that this type of model should be used gently and with a bit more care then any of my other models

Muffina

hello! is there a way to make the connection between the ducky s and the clicker stronger? i printed them for my boys bday but a few of them broke pretty easily

Fuzzycollector

not sure why but the duck has orange layer all the way around a few layers I into beak

Christine

Anytime!!

Christine

Hii!! yep! I’ve added sculpt duckies and keychain version as well!

Leah

I just re-read your comment and now I get it! Thank you 🥰😅

C Verdon

hi! can i use these duckies without the clicker? they are adorable!

Leah

The part you insert into the ducky!

Christine

hii!! sorry im not sure if I understand, the cap which is inserted into the ducky is 3d printed and is included in the zip 🥰

Leah

Hi!! Where do I get the keycaps? Any recommendations? I found the switches I just need caps 😅

Christine

yaay! 🥰🥰

JeffBecky

I zoomed in I see now thank you I just wanted to make sure mine were right. I love them!!

Christine

Hii!! You may need to scale the tub and water down 2% so the switch fits more tightly in the water! you can send me a picture on instagram, facebook, or discord if you joined it to help troubleshoot 🥰

Christine

Hii it just means your tolerance is bigger than mine, this will happen with different filaments and printers. Scale the ducky down 1-2% depending on how loose the cap is 🥰

Josh Hendershott

Is the cap supposed to fit tight in the duck? Mine falls out easily

Muffina

The clickers keep coming out of "the water" :( i tried hot glue and 10 seconds glue but nothing helps. How do i make sure the clickers stay in tne water?

Paradoxal_Dinosaur

Flushing/Prime volume on my Bambu automatically sets itself at 45mm. I upped mine to 50, and it solved the black line issue when doing eyes. I used to have this issue alot. Good luck!

Christine

Hii!! you can reference the pictures above in the post, the ducky is “floating” on the water, and you can see the top part of the switch 🥰

JeffBecky

Should you be able to see the clicker switch at all?

Christine

Looks your you’re tolerance runs higher than mine! in the future if you wish the caps to snap in instead of gluing them scale down the object that they fit into by 1% 🥰

Manda Diehl

I had the same issue, I did with the hay bails as well. I ended up gluing all mine.

Christine

yaay!!!

Chrissie Stern

These are the cutest thing ever! I made a bunch of them and brought them to game night and everyone snatched them up right away!

Cailzara

Thank you! I made sure the flush into infill wasn’t clicked…I will look into flushing volume!

Marti Reusch

You likely have it set to purge to infill under your "others" tab, or your flushing volume isn't high enough.

Cailzara

These are very adorable! But I am hoping someone can help me. I'm new to 3D printing and not sure what I'm doing wrong but I am getting black lines around the ducky's head. Is there something I can do to prevent this? Thanks!

Radio Chicken

I said it on Threads earlier...buuut any chance of a chicken one day? <3

Christine

its up! redownload it from the download post! 🥰

Christine

its up! redownload it from the download post! 🥰

Christine

Its up! redownload from the download post! 🥰

Christine

Hii!! I get mine from amazon! I've included the link to the exact ones in the post!

Rachel's Crafty Corner

Where can I get the individual key clickers to make these?

Christine

no as long as you keep it tidy to the sides of the clicker 🥰

Andreea Sencion

I had a similar issue with mine. I’m going to glue mine. Correct me if I’m wrong, gluing the clicker down won’t present any issues, right?

Christine

Not at the moment, they are meant to be more of a desk pet than pocket clicker

Christine

yaaay!!

BeBu3D

I loveee these ❤️but is there a smaller version ?

Laura Shipton

Love these.

Kathleen Lewis

I printed one for my 10 yr old before he got home last night and he was over the moon excited about these!!

Marta Domagalska

Pleeeeeeeeeeease ducky keychain 🙏🏻🥺

Christine

haha no worries! and I know right 😅😆

Paul G

Oh, duh, I just realized the glue label is totally visible and legible, sorry about that. I only backed up to the part where you applied it and thought it seemed like a lot for CA glue. 😆

Christine

Make sure to test the tolerance first by printing one single color ducky with the new scale 🥰

Radio Chicken

Oh awesome! Thank you! I'll do that with my next duck colours! <3

Christine

It’s gorilla glue. I just realized it’s fabric glue tho so don’t use that one haha! I love the general gorilla super glue and been using it a long time, I must have grabbed the wrong tube for this one.

Christine

hii!! Yeah this will happen with different printers, filaments, the tolerances will be different. Don’t scale the cap though! scale the ducky down 1-2% instead

Radio Chicken

Printing! My ducks and water are done, just waiting for the tub to print :) the cap that goes into the ducky is quite loose though, it'll require gluing for me, based on your videos they look like they just fit in there, but mine printed a bit loose - I didn't change any settings, but I might need to up the cap .2-.5%....or just glue :P

Paul G

What glue are you using in your short?

Kendra Kent

Yay! Just before I saw this my sister was asking me to print 50 ducks for her next cruise! I am excited to print these!

Christine

No worries at all!!

Kristen

Oh my gosh, I’m blind. So sorry!

Christine

It’s in the post 🥰

Kristen

Do you have an Amazon link to what you use?

Christine

awww yaay!!! Thank You! I appreciate that 💖💖

Lisa

These are adorable and I love the water detail! I'm sure these will be popular especially with spring and Easter around the corner. Thankyou for ALWAYS thinking outside of the box and bringing us new designs we haven't seen other places 🥰 BRING ON THE CLICKERS! 🤩

Leah Ditch

Thank you!!!!

Christine

I will be updating the zip to include a ducky sculpt

Christine

hahahaha

Leah Ditch

Are the ducks also non clickers?

Angel.S

We’ve been pranking my boss for two years by hiding ducks everywhere. He has a mechanical keyboard…he’s getting a new enter key 😈

MoXYZ Mfg

Perfect for the Jeep market.

carrie roehrig

Awww. Adorable.

Christine

Sounds good!

Megan Coohill

I will check again on my computer when I get home later. I'll let you know if I still don't see it! Thank you

Christine

No worries! They will be under February released just below those. If you’re still not seeing it, try logging out and then back in!

Megan Coohill

For me the last thing is the January teddy bears. I ended my membership end of January (temporarily due to financial reasons), but I can not resist the ducks so I just resubscribed under the hobbyist since I never started selling anything I've printed (not there yet 😅)