Christine
patreon
[Exclusive] Bottle Terrarium - Puffypuff Collabration
🕑 Added 2025-06-04 21:00:55 +0000 UTCHii!!
I am happy to share this collaboration with PuffyPuff! It was so lovely to work with them and I am obsessed with all of their creations so please make sure to check out their patreon - PuffyPuff Patreon
✨ Fungo ✨
3 walls, 15% gyroid or 3D honeycomb infill. No supports.
I don't recommend going smaller than 100%, Tested up to 200%
We strongly recommend printing Fungo and all the split parts with 0.12 - 0.1 Layer height. He is small and prints much better at these smaller layer heights. However he is still printable with 0.2 layer height.
The eyes and cheeks should fit flush to the face as shown in the pictures above, if they are sticking out at all you may have put them on the wrong side.
100% Fungo fits inside 100% terrarium
✨ Bottle Terrarium ✨
all the parts can print at 2 walls, 15% gyroid or 3D honeycomb infill. No supports.
Switch Wall generator to Arachne for all the parts of the terrarium
Infill can be turned off for the bottle.
You guys had requested a clicky version of fungo, Puffypuff was kind to make one!! Its avaliable on their patreon - PuffyPuff Patreon
⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐
+++ This is a patreon exclusive release. Patrons can download it free from the patreon exclusives link in the download post +++
✨✨-----> Current download post <-----✨✨
![[Exclusive] Bottle Terrarium - Puffypuff Collabration](https://img5.patrefans.com/storage/2/hi/ug/563145-019e8263-1b00-7fda-a095-11c73c89ede0.png)
![[Exclusive] Bottle Terrarium - Puffypuff Collabration](https://img5.patrefans.com/storage/2/oe/yu/563145-019e8263-1b0f-715d-a035-a4e6c8b013ec.jpg)
![[Exclusive] Bottle Terrarium - Puffypuff Collabration](https://img10.patrefans.com/storage/1/ct/th/563145-019e8263-1b12-73c4-8ab6-96a171d85663.jpg)
![[Exclusive] Bottle Terrarium - Puffypuff Collabration](https://img5.patrefans.com/storage/7/lx/up/563145-019e8263-1b19-7b5c-8ad2-a69f4a438a91.jpg)
![[Exclusive] Bottle Terrarium - Puffypuff Collabration](https://img10.patrefans.com/storage/10/og/ot/563145-019e8263-1b2f-7764-ae7a-7821e626dd39.jpg)
![[Exclusive] Bottle Terrarium - Puffypuff Collabration](https://img10.patrefans.com/storage/7/ni/bt/563145-019e8263-1b3e-731a-b3d6-596ba43fe534.jpg)
![[Exclusive] Bottle Terrarium - Puffypuff Collabration](https://img5.patrefans.com/storage/4/lz/by/563145-019e8263-1b4e-755f-b378-b6e7c4dcacda.jpg)
![[Exclusive] Bottle Terrarium - Puffypuff Collabration](https://img5.patrefans.com/storage/10/ak/sg/563145-019e8263-1b5a-73d1-970b-54a35de4496e.jpg)
![[Exclusive] Bottle Terrarium - Puffypuff Collabration](https://img5.patrefans.com/storage/11/ju/zf/563145-019e8263-1b63-7189-ba1e-aff5d3e21b41.png)
Comments
JM
What filaments did you use one these? So cute!! Love your colour choices
Christine
Hii!! You can send me a picture of what the prints with the sticky feet to help troubleshoot, you can send it to me to instagram, facebook, or discord
Alanna Walters
I had printed some of these and the legs are really hard to move. Is anyone else having this problem too?
Christine
Hii!! sorry i’m not sure if i understand, you can send me a picture on instagram, or facebook, or discord!
Christine
hii!! It’s avaliable only on puffypuff patreon
Laura
hi love these there so cute but could you please tell me how to turn the infill of around the eye as getting a black line all around i use bambu slicer thank you
Eb3dcreations
Are we going to get access to clicker version as well or we have to join Puffypuff to receive it??
Christine
It’s included in the bottle terrarium 🥰
Nell Simon
So Cute!! Where is the download link for fungo?
Printcess Pixel
These turned out so CUTE! Super stoked she released the clicker version as well! Great drop guys!
Katherine Swaim
sidenote-how would you go about turning off the infil? would I increase the infill density up to 100? or is there a simpler way?
Katherine Swaim
oooooo! I've been hoarding some blue pearl elixir cookiecad for a hot minute now and I think it would be perfect for the bottle!
Christine
Yes! i updated the zip! redownload form the download post to grab it 🥰
Christine
yaay!!
Justine Taylor
Oh I love that my suggestion was made! That’s awesome. I’ll have to go over and get it!
Max Wojcik
anyway you can make his hat and the dots 1 piece? :)
MB Prints
They look like a cuter version of Holo props Potion stash. I love little things. 🥰
Christine
Hii!! there is not
Sylvia A
So so cute! Is there a keychain version?
Rebecca Couch
Oh my goodness!!!! 😍😍😍
Giamarie Saponaro
Love this!!! Can’t wait to get home next week so I can print these! I’ve been gone 2 weeks already and started going through printing withdrawals on day one 😂
Jasmine Beauparlant
Really FREAKING CUTE 🍄
