Christine
patreon
[Archived] Woobu Koneko and Flower tier stand
🕑 Added 2025-05-18 21:08:37 +0000 UTCHii!! Happy sunday!!!
I am so excited to share this design with you guys!
✨ Woobu Koneko ✨
Assembly video - Youtube shorts
3 walls, 15% gyroid or 3D honeycomb infill. No supports.
The print in place version tested down to 50% I don't recommend going below 70%
for the split to parts version Use 0.12 Layer height for best quality on everything except the body which can be printed with standard 0.2 layer height
Use Concentric pattern for top surface pattern
Split to parts version tested up to 120%, I don't recommend scaling this version down
Please use Brims with a brim gap of 0.3 if you are using Textured PEI plate, especially so if its a multi color plate. A little bit of post printing clean up is better than losing the plate due to adhesion issues.
For the split to parts version tolerance can vary across printers and filaments, Scaling up or down 2% depending on your fit should resolve any assembly issues. If you need to scale the face make sure you are also scaling the rest of the face parts with the same scale.
I used a thin layer of UV resin to add shine to some of the eyes.
Editing 3MF
Avoid using the slicer's fill tool when coloring the eyes, footpads, and ears in the 3MF files, because they are split to parts. Instead, assign color to them from the object list to make the edges look cleaner. Do not split to objects.
Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing.
🌸 Flower tier stand 🌸
2 walls, 15% gyroid or 3d honeycomb infill, no supports
The posts should fit snuggly into the base and flower platforms and not wobble
print the smallest post first to test your tolerance. If post does not fit scale it down 2%, if it is wobbly scale it up 2%
⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐
I avoid splitting models to parts as that introduces a chance of small parts coming loose and becoming a choking hazard if not assembled correctly, but because this model is larger I wanted to add the option to print without AMS. Please ensure that you are gluing the parts into place securely and that everything is flush and fitted properly to reduce the chance of small parts coming loose.
+
📌This design has been Archived. If you were subscribed the month which this design was released then it will be free to download from your My mini factory account if you redeemed the file share email.
If not then it is available to purchase from the below links. Patreon License still applies to designs purchased separately. Make sure to use the discount code listed in the download post (the flower stand is patreon exclusive)📌
** I have used many different filaments with this release. Best way to get the names for the colors I used is to reach out to me with the picture via Instagram, Facebook or discord. I'll be happy to answer filament questions in the comments below as well.
![[Archived] Woobu Koneko and Flower tier stand](https://img5.patrefans.com/storage/9/ik/fr/563145-019e8263-1cd6-78e0-a5a0-d5c8a20797b2.png)
![[Archived] Woobu Koneko and Flower tier stand](https://img5.patrefans.com/storage/8/ae/ey/563145-019e8263-1cdc-7acc-a441-6dcffbc353eb.jpg)
![[Archived] Woobu Koneko and Flower tier stand](https://img10.patrefans.com/storage/9/oi/wq/563145-019e8263-1ce1-7a99-9bbb-a1364c5f74cd.jpg)
![[Archived] Woobu Koneko and Flower tier stand](https://img5.patrefans.com/storage/2/de/rc/563145-019e8263-1cf7-71d7-bfe2-d41f94c64409.jpg)
![[Archived] Woobu Koneko and Flower tier stand](https://img10.patrefans.com/storage/5/hy/iq/563145-019e8263-1d08-7294-9330-b579050e5a92.jpg)
![[Archived] Woobu Koneko and Flower tier stand](https://img5.patrefans.com/storage/7/fm/fv/563145-019e8263-1d16-7aa6-80fb-950cd48624ec.jpg)
![[Archived] Woobu Koneko and Flower tier stand](https://img5.patrefans.com/storage/11/qb/ax/563145-019e8263-1d22-7b87-aeae-935f87da1c18.jpg)
![[Archived] Woobu Koneko and Flower tier stand](https://img5.patrefans.com/storage/4/ld/bc/563145-019e8263-1d32-732b-b6a0-8ed4cfd6c469.jpg)
![[Archived] Woobu Koneko and Flower tier stand](https://img5.patrefans.com/storage/4/sv/ef/563145-019e8263-1d37-7039-adc2-216f9f8e813f.jpg)
![[Archived] Woobu Koneko and Flower tier stand](https://img5.patrefans.com/storage/9/bk/wo/563145-019e8263-1d3d-7572-9026-51affb5eea11.jpg)
![[Archived] Woobu Koneko and Flower tier stand](https://img5.patrefans.com/storage/1/xb/vj/563145-019e8263-1d3f-7c6a-acf6-0dca3e42714a.jpg)
![[Archived] Woobu Koneko and Flower tier stand](https://img5.patrefans.com/storage/12/og/jq/563145-019e8263-1d4c-7207-b173-a91c314e48f4.jpg)
![[Archived] Woobu Koneko and Flower tier stand](https://img10.patrefans.com/storage/8/gp/gr/563145-019e8263-1d67-7948-a935-4c4464ae04ad.jpg)
![[Archived] Woobu Koneko and Flower tier stand](https://img5.patrefans.com/storage/6/sf/gc/563145-019e8263-1d6f-7a16-a3df-cbb593795f1b.jpg)
![[Archived] Woobu Koneko and Flower tier stand](https://img5.patrefans.com/storage/4/js/rz/563145-019e8263-1d77-7972-9f1b-df1781d11242.jpg)
![[Archived] Woobu Koneko and Flower tier stand](https://img5.patrefans.com/storage/2/gv/ek/563145-019e8263-1d82-7d45-8823-f09418d6f17a.jpg)
Comments
W3AVER
on the pink blue & white one, what is the pink color?
Myst 3D
I have used it and peachy by Ziro
Christine
At the moment there’s just the two versions, all split up or no cheeks and nose combined
Nicole
Is there a split version of the face without the cheeks, and with the nose not combined?
Ohana Factory
Will a pencil jar be possible? 🥰🖍
Beccaboo
I would love a stand like this one with mushroom tops
Christine
hii!! It’s Ziro rose
Rebecca Couch
On the pink, blue, and white one...what is the pink brand/color? I found the blue and white. ☺️
Christine
yes! I’ll message you with an invite 🥰
Jennifer Elliott
Is there a layers in green discord?
Christine
hii!! In the main picture the one with the green face is a purge object i flushed filament into during a multicolor plate
Robyn963
What are the grey and green filaments on the left in the group photo? Thank you! :)
Christine
I dab the tip of the UV resin bottle so a tiny little dot of resin drops onto the center top of the eye, and then i use the end of a tooth pick to spread it around and then cure it quickly before it droops. If you click on the moth pixie painting video in the download post at around 11:03 i resin the eyes 🥰
Paula
When you UV resin the eyes - how do you do this? Do you just apply it from the bottle, or do you use a paintbrush to apply it? Or some other tool? I want to try on the guys i've just printed, but don't want to do it wrong lol.
![[RV]-Nobunaga from fanbox](https://patrefans.com/kistorage/29149.jpg)
