Christine
patreon
Computer Planter πͺ΄
🕑 Added 2025-07-11 19:34:58 +0000 UTCHii!!
I've had this silly idea of a computer planter, but with a sprinkle of nostalgia! It can be used just as an organizer or to pot up small plants! comes with a clicky keyboard as well β¨οΈ
πͺ΄ Computer Planter πͺ΄
Assembly video - Youtube shorts
2 walls, 15% gyroid or 3D honeycomb infill, no supports
Screens can be swappable or glued into place
Screen can be printed on a single color printer by swapping the filament colors. For the spiral screen swap on layer 4, and for the static swap out on layer 8 when printing with 0.2 layer heights
I've included a version without keyboard tray
Keyboard Clicker
2 walls, 15% gyroid or 3D honeycomb infill, no supports
The switches I used (please note this is a link from Canadian amazon) - Amazon Kailh box switch
If you have a hard time inserting the buttons onto the switch try heating it up a little
βAs with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervisionββ¨
+++ You can grab these files from the current download post +++
β¨β¨-----> Current download post <-----β¨β¨β¨β¨
Filaments used
Beige computer - Polymaker marble limestone
Lime green screen - Ziro matte pastel Green
Comments
Tristan Morgan
Is it possible to get a screen with the smiley face on? Who wouldn't want a happy computer planter on their desk :)
Christine
The notch in the monitor should fit tightly into the screen that the screen stays in place, but can also be pulled out again if needed! If your screen isnβt fitting tightly into the monitor id scale the screen down 1% π₯°
Carey (and Jack) Parkin
So cute! Could a magnet on the screen be added so it is easy to swap and stay in place?
