Christine
patreon
Mini Spider Magnet and Enclosure
🕑 Added 2025-10-09 21:17:18 +0000 UTCHii!!! Happpy Thursdays!!!
Last drop of halloweenie themed drop! It took a little longer than expected to get this all together but it is done and im excited to share it with you!
Preview - Youtube shorts
🕸️ Mini Spider Magnet and fly Magnet 🕸️
3 walls, 15% gyroid or 3D honeycomb infill, no supports
I recommend printing them with 0.16 Layer height or lower
I used 5x2 magnets (5x3 will fit too), I buy them from amazon. CA. You can find them here - Amazon Magnets
The magnet holes are hidden within the body of the Spider and fly and you will need to pause the printer in order to place them into the holes. If you do not have a magnetic print bed don't use the magnet version.
Please note I've included a pause into the 3mf which will make the printer pause when it is time to insert the magnets. The pause will only show up when in preview mode. You will need to open the 3MF as a project for it to work. If your slice isn't showing the pause, you will need to add one manually
Do not split into objects.
The fly is very very small, I don't recommend printing it above 0.12 layer height.
Editing 3MF
The 3mf models are split to parts. All the parts are located in the object list on the side panel. It is best not to color the objects manually using the fill tool and instead assign color to them from the object list to make the edges look cleaner. If a part you wish to color isn't on the object list then you can use the fill tool to color it. Do not split to objects.
The magnets are "negative parts" in the object list, if you wish to remove them, select them from the object list, right click and choose delete
Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing.
Spider Enclosure
3 walls, 15% gyroid or 3D honeycomb infill, no supports
The vines will need to be heated and bent in order to properly fit into the enclosure. Take care when using a heat source to heat the stem. Hot water can also be used to bend the stems.
I included 3mf files for bambu studio that come with fuzzy skin preset
Comes in two styles: Diamonds and Slits
For assembly watch the preview youtube short
⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐
+++ You can grab these files from the current download post +++
✨✨-----> Current download post <-----✨✨
🕸️🕸️
Comments
Mandi Markwardt
I love this so much! The amount of detail and all of the fun parts to the enclosure are fantastic! Thank you!
Christine
The preset pause is only included into the 3MF files, if you are using bambu studio and open the magnet 3MF files as project you’ll see the pause in the preview mode after slicing. If you are using the STL versions of the magnet or your slicer isnt opening it with the pause then you’ll need to add one manually just before the magnet hole closes 🥰
Autumn Bader Thomas
so, im sorry i havent printed anything with a magnet before will it automatically pause when we need to add the magnet? as long as we use the magnet file?
