Christine
patreon
Hutch and Mini Worms Magnets
🕑 Added 2025-09-06 18:41:30 +0000 UTCHii!!
Im really excited about todays drop!
Preview - Youtube shorts
For my followers you can grab the hutch from thangs - Click here
🪱 Mini Worm Magnets 🪱
3 walls, 15% gyroid or 3D honeycomb infill, no supports
I recommend printing them with 0.16 Layer height or smaller
Sculpt version and Magnet version
I used 5x2 magnets (5x3 will fit too), I buy them from amazon. CA. You can find them here - Amazon Magnets
The magnet holes are hidden within the body of the worms and you will need to pause the printer in order to place them into the holes. If you do not have a magnetic print bed don't use the magnet version.
Please note I've included a pause into the 3mf which will make the printer pause when it is time to insert the magnets. The pause will only show up when in preview mode. You will need to open the 3MF as a project for it to work. If your slice isn't showing the pause, you will need to add one manually
Do not split the worms into objects.
Editing 3MF
The 3mf models are split to parts. All the parts are located in the object list on the side panel. It is best not to color the objects manually using the fill tool and instead assign color to them from the object list to make the edges look cleaner. If a part you wish to color isn't on the object list then you can use the fill tool to color it. Do not split to objects.
The magnets are "negative parts" in the object list, if you wish to remove them, select them from the object list, right click and choose delete
Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing.
📕 Hutch and Book magnet 📕
3 walls, 15% gyroid or 3D honeycomb infill, no supports
Hutch tested down to 80%
To recolor the parts within this pack within the 3MF use the fill tool, and toggle the "smart fill angle" to color just the parts desired.
Please refer to the above magnet information for the Book Magnet.
⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐
+++ You can grab these files from the current download post +++
✨✨-----> Current download post <-----✨✨
Comments
Christine
Hii!! The pause is in the 3mf version only. You’ll need to open the 3mf as a project for the pause to show. when you slice you’ll see a little tag on the right side that will show you the layer the pause is on
Suki
Where do I look for the pause in bambu slicer for the book? It is split into filament, layer, time, etc. I didn't see it anywhere
Lillian Hutcheson
The book with magnet holes .stl isn't in the .zip file, tried converting the .3mf file to .stl but it filled the holes , can you help?
