The Lebois Racing
patreon
SRT Gearbox : March update!
🕑 Added 2025-03-10 06:11:51 +0000 UTCBasically, I thought it would be a small update...
...
Not at all...
Come on, let's stick to it with a nice clean log that no one will say boooouuuuu it's not clear
The main subject of this update is the sequential. We keep the idea of the previous update: a single switch, and a longer stroke. On the other hand, we change the switch, we need these roller switches which are bigger (and are therefore more tolerant to printing deviations):
(if you place an order on the store, I can slip you one... )
I'll see next week to modify the shopping list on the Industry&CNC side.
So, new Body2, new Seq Holder. By the way, I cleared a little space for the tracks on the carriage... just in case... But it's not necessary to modify it. And new Slider and Slider cover. The tracks remain the same. I also added stops on the slider to prevent us from going too far in sequential mod. I do not guarantee that it is perfect but as it is I find that the sequential has never progressed so much!
By the way, on Body2, there is a very small correction: visibly on my gearbox, the M5x50 of Turn was touching a little...
Then on the Eclutch side: I corrected the shopping list: the din7991 M3x10 is useless... and I added a diagram with where which screw goes.
And I took the opportunity to initiate what must be initiated: several behaviors for the eclutch. Well for the moment it is basic:
C1: we press the clutch to unlock the box.
C2: release the accel to unlock the box
C3: the box is only blocked in neutral and we act on the clutch to release it.
If some want to work on more advanced behaviors, they can share them in comments on the site!
On the Body1 side, I raised the reverse gear screw a little so as not to have to twist the screw... too much. There are many differences from one assembly to another... I will see in the future if it is necessary to raise it even more.
For information, the solution to resolve the latency problem will be presented soon.
Comments
Mmmmmm
Same question here.
Darren Ralph
I printed the January updates, body2 etc... Are the March updates the same? Or will i need to print again?
