Ray Lenses
patreon
Lightweight RX Printhead for all types of TRIANGLELAB MOUNT
🕑 Added 2024-03-13 10:01:48 +0000 UTC Very easy to install link here: https://www.youtube.com/watch?v=nUNf97-S3tM&t=50s After Successfully receiving of my 2in1 printhead and high request to do the same printhead but for single extruder and Trianglelab mount types of hot-end I decided to listen and design this printhead for you guys to upgrade your printer Printhead; This is an easy-to-install lightweight and high-efficiency printhead. Please take a look at the detailed video below on how to install it. Some cool features of this printhead *High-cooling performance printhead *With this printhead you can use the best hotends available for any 3D printers since most of them use trianglelab Mount like (Bambulab, rapido, Red Lizard hotend...) so better flow rate better print quality. *Supports Lerdge Aquarius extruder, Orbiter LDO extruder, Bondtech extruder Sherpa Mini.HGX lite 2 and other types of extruder (you can request more). *Compatible with both for Lerdge iX standard version and linear rails version *print with no support *After finishing the installation of the new print head because the z offset is lower on this one now you will gain 20mm extra on the Z-axis so you can print taller 200mm instead of 180mm (don’t forget to set it 200mm value on Lerdge travel settings menu and also in your slicer printer settings) *print with no support #Free download for all my patron's Step file members #No support are needed to print, the STL files have already the correct orientation to print *Feel free to change and use the models as your need but only for personal use, be respectful and don't share my models or remix on the internet without my permission because to make this models took me a lot of effort and time plus multiple prototype tests until they work perfectly.
