AJAX_3D
patreon
TD-1 Firmware V1.0.1
🕑 Added 2024-04-14 23:32:37 +0000 UTCThere were some bugs identified with the V1.0 firmware. One of which was causing some Windows 11 compatibility issues for a small number of Windows 11 users. If you are one of those affected by this issue, you will need to either flash the update using a device that does not have these compatability issues, or flash the UF2. Note that if you do reflash the UF2, you will need to reflash the license file as well. To reflash the UF2 you must hold the boot button on the RP2040-zero while connecting to a computer (the compatibility issues mentioned is not present in the bootloader mode). Another bug was causing TD-1 to show as a keyboard and sometimes mouse when connected to Mac as well as windows. This issue did not cause functionality issues but have been cleaned up for sake of keeping everything tidy. The final thing that was changed in this version is a feature to flip the display 180-degrees (upside down) as this was requesting and quite easy to implement. So, in short, the changes here are:
Windows 11 compatibility bugfix
Windows and Mac HID Keyboard/Mouse devices removed.
Added 180-degree screen flip option in settings.
If you are running HueForge V0.7.1 you can update TD-1's firmware directly through HueForge using the TD-1 HueForge User Guide, found here. The "Updating TD-1 Firmware" is towards the bottom. If you do not have access to this version of HueForge, you can use the same python updater script "Updater V3.py", also provided in this post.
As always if you run into issues with anything involving TD-1, please feel free to either message me here on Patreon or jump in the Discord and ask for help in chat there.
Comments
Anthony Spencer
Hello, you probably do not want to display person information here for all to see. You should email me at support@ajax-3d.com instead. As for your inquiry, I need more information about what is happening with your unit. Do you get a TD-1 menu in HueForge? Is it just that the screen doesn’t work?
Alessandro SulBrasil
Ajax 3D TD-1 Kit 000744 I bought the Kit from DREMC Australia, the kit was assembled by an electronics technician, (I don't have the tools). After assembling the kit, the display didn't give any signal, the kit was disassembled and reassembled following the steps in the pdf on the website. When connected to the Windows 11 computer, it opens a USB disk drive, with only one file inside, boot_out.txt I contacted DREMC for support, this was the message: --------------------------------------------------------------------------------------------------------------- Please reach out to Ajax with that boot files so he may re-provide license files and re-flash the board. As you may need to re-flash the device via u2f. --------------------------------------------------------------------------------------------------------------- How do I get a new license to update the TD-1? Do I need to post the contents of the boot_out.txt file here? What should I do now?
