Grégoire Saunier
patreon
Nozzle Fan Duct
🕑 Added 2019-04-03 14:20:37 +0000 UTCWorking on the nozzle fan duct for the second time. Thanks to RH_Dreambox, robrps, stahlfabrik and David Pesce for their help and work.
For those that are interested to test you can get it from the link below. Compatible with 0.6.0 and dev.
https://github.com/gregsaun/bear_extruder_and_x_axis/tree/dev/printed_parts/stl/common_to_all_versions
Comments
Grégoire Saunier
New extruder version will come with one that fit perfectly
Austin Vojta
Okay, so this does not fit 0.6.0 as well as the RHD duct. This one is not perfectly centered about the heat block when mounted. I guess perhaps the duct mount hole on the extruder body moved slightly between revisions, and therefore is not at the same X position relative to the heatblock/nozzle anymore.
Grégoire Saunier
Thanks for the feedback
Austin Vojta
From dry-fit alone, seems compatible with 0.6.0. Appears to mount identically to the RHD one.
