Grégoire Saunier
patreon
Bear Upgrade 2.1.0-alpha0 is official
🕑 Added 2019-08-20 11:35:23 +0000 UTCRelease note is here:
https://github.com/gregsaun/prusa_i3_bear_upgrade/releases/tag/2.1.0-alpha0
Feel free to ask your questions :-)
Comments
Keith Beaul aka ciscokeb
Hi Gregoire; I've installed the new Y-axis motor mount and Y-axis Idler mount but I'm struggling with the exact measurement position. I read to use the version 2 instructions but the mounts are different from the original. Do you have a drawing that has new measurement positions for the mounts? I would appreciate for assistance. Thanks.
Grégoire Saunier
Note that the last image show how much the belt is moving up and down due to the pivot. It is only moving by 0.044mm which is much under the tolerance of your prints and maybe even lower than the belt pitch tolerance.
