Grégoire Saunier
patreon
Bear 2.1 Z axis
🕑 Added 2019-10-23 19:14:53 +0000 UTCFinally I am ready to share the new Z axis for Bear 2.1. The re-design of the Z tops is now ready. The Z motor mount got some improvements since the last time I shared it with you.
This is only for Bear 2.1frame (same as Bear 2.0 MK3 frame) and it is not yet compatible with Bear 2.0 MK2S or MK2.5S frame. If you have a doubt about your frame you can check this page: https://github.com/gregsaun/prusa_i3_bear_upgrade/tree/dev/optional_parts/y_belt_holder_for_bear2.0_mk2s_mk2.5_mk2.5s
The assembly instructions are not ready yet but they are very close to the current stable version. Screws are the same but the Z motor mount now use only 2 screws.
Changes since the last time I shared it with you:
- Clearances refinement
- Reduce chances of warp during the print
- Version for MK2S/2.5S has been created
- Several small bugs and improvements
You can download the zip file from the attachment bellow. Use the print settings from the dev branch here: https://github.com/gregsaun/prusa_i3_bear_upgrade/blob/dev/manual/print_settings.md .
This version is shared with you only and might still change before the release.
Comments
Grégoire Saunier
Let me know how it goes and in case it is not better we can check together.
Kristof Spiszak
Thank you, I hope it will resolve my problem with loud Z axis (probably misalignment), it's only problem in my printer :)
Grégoire Saunier
Welcome here 😊
Stig Jøran Moen
Thanks!
