Sauceke patreon

Hotdog v0.2: Wireless and Wire-less

🕑 Added 2022-05-23 13:30:02 +0000 UTC

Comments

yamada tarou

I finally made it thank you! https://illusionlove.blog.jp/archives/14900369.html

yamada tarou

Thank you, I will try to reselect the board type

Sauceke

This usually happens when the wrong board type is selected. Which Arduino board are you using? Can you take me to the product page?

yamada tarou

I get the following error when uploading a sketch. Do you know what to do? Sorry for the inconvenience Of the maximum 30720 bytes of flash memory, sketches use 7902 bytes (25%). Of the maximum 2048 bytes of RAM, global variables use 299 bytes (14%) and local variables can use 1749 bytes. Failed uploading: uploading error: exit status 1avrdude: stk500_recv (): programmer is not responding avrdude: stk500_getsync () attempt 1 of 10: not in sync: resp = 0xaa avrdude: stk500_recv (): programmer is not responding avrdude: stk500_getsync () attempt 2 of 10: not in sync: resp = 0xaa avrdude: stk500_recv (): programmer is not responding avrdude: stk500_getsync () attempt 3 of 10: not in sync: resp = 0xaa avrdude: stk500_recv (): programmer is not responding avrdude: stk500_getsync () attempt 4 of 10: not in sync: resp = 0xaa avrdude: stk500_recv (): programmer is not responding avrdude: stk500_getsync () attempt 5 of 10: not in sync: resp = 0xaa avrdude: stk500_recv (): programmer is not responding avrdude: stk500_getsync () attempt 6 of 10: not in sync: resp = 0xaa avrdude: stk500_recv (): programmer is not responding avrdude: stk500_getsync () attempt 7 of 10: not in sync: resp = 0xaa avrdude: stk500_recv (): programmer is not responding avrdude: stk500_getsync () attempt 8 of 10: not in sync: resp = 0xaa avrdude: stk500_recv (): programmer is not responding avrdude: stk500_getsync () attempt 9 of 10: not in sync: resp = 0xaa avrdude: stk500_recv (): programmer is not responding avrdude: stk500_getsync () attempt 10 of 10: not in sync: resp = 0xaa

Sauceke

It's here: https://github.com/Sauceke/hotdog/releases/latest/download/HotdogServer.exe

yamada tarou

Thank you I thought I saw in the previous explanation that I needed a dedicated server, but I can't find where it is

Sauceke

Sorry about that. The documentation has been moved here: https://sauceke.github.io/hotdog/Documentation/Wireless.html

yamada tarou

Finally completed However, the page I saw last time is 404. https://github.com/Sauceke/hotdog/blob/master/doc/wireless/ASSEMBLY.md#how-to-make-a-hotdog-wireless-version

yamada tarou

Thank you, I will try

Sauceke

Oh. In that case, using the IDE seems to be the only option. Open Library Manager (Ctrl+Shift+I), search for the listed dependencies (BTLE, Protothreads, RF24), and install the latest version. I can't believe there's no easier way to flash an Arduino in 2022. Sorry for the inconvenience.

yamada tarou

"Uploading" has been out all the time Doesn't seem to change https://imgur.com/a/Q2oqcW3

Sauceke

What happens when you try to upload it using the "Duemilanove/Nano(ATmega168)" uploader instead?

yamada tarou

In the case of XLoader, the load does not finish for some reason The word "Uploading" has been appearing all the time I left it for a few hours but it didn't disappear https://imgur.com/a/1nFQQLw

Sauceke

If you're using an Arduino Nano, you should be able to upload the binary using XLoader as instructed here: https://github.com/Sauceke/hotdog/blob/master/doc/wireless/ASSEMBLY.md#programming If that doesn't work in your environment, install the libraries listed here using the Library Manager: https://github.com/Sauceke/hotdog/blob/master/doc/wireless/ASSEMBLY.md#other-nano-compatible-microcontrollers-nano-every-etc