Crash Makerspace
patreon
Hardware Parts List - Compliant Designs
🕑 Added 2023-11-10 22:42:17 +0000 UTCThe Blender files have the components and ya can measure in Blender to get the dimensions, but this post is to help simplify which hardware sizes as you prototype!
Blade & Lock Magnets
- 3mm diameter x 4mm long neodymium
Elastic Bands
- Any thin bands that are just barely taught at 40mm
Bearings
- ID 3mm x OD 7mm x H 3mm ball bearings
(U shaped bearings might be better for thinner ring-cables)
Screws
- Screws are M3 alloy screws. M2's are only used in the Episode 5 compliant design to hold the front down (these are the sideways screws in front & back)
Comments
Crash Makerspace
Yep, these would work for the magnets / bolts / bands for the V4 as well
Albert
is this hardware also for v4
Crash Makerspace
Yep not a problem! I want to share ideas and encourage makers. Just as long as people aren’t turning around and selling them. Credit for for the TikTok post is good with me
Dan 3D
Also I plan to add the whole this to a gauntlet and post a vid of tiktok and tag you in it if that's OK
Dan 3D
Glad I could help lol
Crash Makerspace
If you look at the bottom of the Blade & the bottom of the locks, you'll see where the magnets go! I just now realized that I never showed the bottom of the blade / locks in my videos! Could be a good topic to make an adhoc overview YouTube video for that
Dan 3D
Ok thnx also going through the blend file as well as the stl for type 5 I don't see the mechanism that uses the magnets I rewatched your vids but I don't see the part that uses it would it be under a different version?
Crash Makerspace
https://www.amazon.com/gp/product/B085D8TB8Z/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 One of these Flange bearings would fit on the back of the mechanism they'd be the larger route. Then the standard 3x7x3 bearings (plain or U) would be used on the 3mm spokes that are on the Unibody Cover
Dan 3D
Hey I've been searching everywhere can not find those bearings in the specs you gave anywhere the best I could find were fir a pair on amazon for $35
Crash Makerspace
No problem dude, Merry Christmas!
Dan 3D
Thnx m8 Merry Christmas
Crash Makerspace
https://www.youtube.com/watch?v=phMVd_rX0to&t=7s < The beginning of my YouTube analysis shows the same U bearings there! And the neodymium magnets are shown in my videos as well; I believe episode 2. And yes, they are small round neodymium magnets at the dimensions specified.
Dan 3D
Ok could you post a pick of the items like the "u shape" barings as well as the magnets I'm assuming they are round based on the Dia given but I can't find u shaped or magnets In the size you listed so I want to make sure I'm looking for the right things thanks
Crash Makerspace
Correct, this is the Prototype 5 Parts! I don't have a list of Links since many of my parts are from lying around or variety hardware kits! I'm sure most of these parts are on Amazon if you search for them; you may just need to buy them in packs of 10 or similar.
Dan 3D
this list applies to the prototype 5? having a issue finding the materials anyway you can link where to buy them (amazon if possible)
Crash Makerspace
Hey C! The Compliant Mark 5 files are up! They been up for a bit; just needed to make a YouTube vid and such describing it. "Hidden Blade Compliant Prototype 5" Post has em in attached!
C
Can't wait to see the mark 5 files go live
Crash Makerspace
It should be under the Hardware collection group! The screws also aren't in the blender file since the holes in the model are where those go.
Austin Gignac
Is this for the mark 5? I'm not seeing these in the blender file. @crashmarkerspace
