Aitrepreneur
patreon
1-Click INSTALL QWEN 20B TEXT TO IMAGE KING ComfyUI WebUI!
🕑 Added 2025-08-11 20:04:34 +0000 UTCHey everyone! I've created a 1-click installer for the NEW QWEN IMAGE MODEL! THE NEW BEST TEXT TO IMAGE MODEL ever made! Insane artstyle, incredible prompt following, great text design and just amazing quality. It can do everythingl. BUT...NOT BY ITSELF...
The only way to TRULY Make it the best is THE SUPER COMBO TEAM QWEN + WAN 2.2! And My Workflow makes this possible!
You can check out the video right here: https://youtu.be/7P4LHEAEGNg
The workflow: https://www.patreon.com/posts/136261640
The installer of course automates the entire install process for comfyUI and the models downloads!
LOCAL INSTALL!!! RECOMMENDED TO START FROM SCRATCH SINCE YOU NEED THE LATEST COMFYUI TORCH VERSION!!!
Download the QWEN-ULTRA-COMFYUI-MANAGER_AUTO_INSTALL.bat
Run the bat file and select either option 1, 2 or 3 depending on your GPU vram.
Wait for the install to finish
The webui will launch, load the QWEN_COMBO_ULTRA_WORKFLOW.json file and there you go😎
DON'T FORGET TO GO INSIDE THE MANAGER AND CHOSE THE NIGHTLY BUILD FOR COMFYUI TO MAKE SURE THAT THE 8 STEPS LORA WORKS
IF YOU ALREADY HAVE COMFYUI INSTALLED USING A PREVIOUS INSTALLER:
Download the QWEN-ULTRA-MODELS-NODES_INSTALL.bat and place it in the ComfyUI_windows_portable\ComfyUI folder
Run the bat file and select either option 1, 2 or 3 depending on your GPU vram.
Wait for the install to finish
???
Profit 😎
IF YOU GET AN ERROR WHEN LAUNCHING COMFYUI AFTER USING THIS INSTALLER SAYING "AssertionError: Torch not compiled with CUDA enabled" it's ok don't panic.
Just go inside the python embedded folder, click on the folder path, type cmd press enter, this will bring the command prompt window and there type:
python.exe -m pip uninstall torch
python.exe -s -m pip install --upgrade torch torchvision torchaudio --index-url https://download.pytorch.org/whl/cu128
--->replace cu128 by your cuda version (if you don't know your cuda version just open a new cmd window and type nvcc --version it will then tell you at the end Cuda compilation tools, release 12.8, V12.8.93 or something different like 12.6, in that case just use cu126 instead of cu128)
IF YOU ARE USING RUNPOD:
Create an account if you haven't already: Runpod
Click on Pod (on the left side) then click deploy
Choose a GPU with at least 24gb of VRAM (4090 is best), click here for the comfyui template (aitrepreneur/comfyui), then edit the template and choose 100gb for both the container and volume disk, then deploy on demand
Go to my pods, wait for everything to finish and then click "connect", then "Connect to HTTP SERVICE port 3000" and click on the manager to update comfyui and restart it
Then go to the port 8888, go inside the comfyui folder and then drag and drop the QWEN-WAN-AUTO_INSTALL-RUNPOD.sh file on the left side of the UI then click on the "Terminal" icon on the right side on the UI
Copy and paste these two lines then press enter:
chmod +x QWEN-WAN-AUTO_INSTALL-RUNPOD.sh
./QWEN-WAN-AUTO_INSTALL-RUNPOD.sh
Wait for everything to be installed
Go back to the port 3000 and click on the manager, choose the Nightly build and restart it
Load the QWEN_COMBO_ULTRA_WORKFLOW.json file and there you go😎
Also use the command:
tail -f comfyui.log
inside the workspace/logs to get the real time logs so that you always know when the install is done. It will then ask you to restart, so click on that restart button, wait for the webui to reboot, click refresh once it's done and there you go.
IF YOU ARE USING RUNPOD AND YOU WANT TO STOP THE POD THEN RESTART IT:
Go inside your pod
SERVICE port 8888
Go inside the Comfyui folder, open a terminal icon and re copy and paste those two lines:
chmod +x QWEN-WAN-AUTO_INSTALL-RUNPOD.sh
./QWEN-WAN-AUTO_INSTALL-RUNPOD.sh
And then in a few seconds it will reinstall all the requirements for the nodes
Go back to comfyui port 3000, click on manager, click update all, wait for everything to be updated then restart.
Re drag and drop the QWEN_COMBO_ULTRA_WORKFLOW.json file inside and there you go😎
As always, supporting me on Patreon allows me to keep creating helpful resources like this for the community. Thank you for your support - now go have some fun😉!
Comments
Charles Hopper
Its working for me beautifully except the images never come out clear for me. Extremely grainy, but other than looking like something blown up to much in MS paint, the output follows the prompt perfectly. I know its got to me something on my end, I'm a newb after all, but I have reinstalled following the video 3 times.
ti
Same here. Any solution?
Andries van der Wijk
Fastfilmgrain and FastLaplacianSharpen nodes are missing. Also, updating ComfyUI breaks the whole thing, so don't do that.
Aitrepreneur
dm me errors instead
Frank B
Dude your last few All in one installs for Quen and Wan are simply not downloading and installing the models for me, is this because Im not installing to a c:/ path?
Ian Brumley
After installing the models (This should be included with the Auto Installer, but I figured it out so I guess it's ok...), I get the error: mat1 and mat2 shapes cannot be multiplied (512x4096 and 10240x4096)
Ian Brumley
Got his error after installing everything Prompt outputs failed validation: UnetLoaderGGUF: - Value not in list: unet_name: 'flux1-dev-Q8_0.gguf' not in ['Wan2.2-T2V-A14B-LowNoise-Q4_K_S.gguf'] DualCLIPLoaderGGUF: - Value not in list: clip_name1: 'ViT-L-14-TEXT-detail-improved-hiT-GmP-TE-only-HF.safetensors' not in [] - Value not in list: clip_name2: 't5-v1_1-xxl-encoder-Q8_0.gguf' not in [] VAELoader: - Value not in list: vae_name: 'ae.safetensors' not in ['qwen_image_vae.safetensors', 'wan_2.1_vae.safetensors', 'taesd', 'taesdxl', 'taesd3', 'taef1']
Anna
I don't get this one, everything I got out of it, on suggested settings, was SD era quality. At least for "photos".
VINCENT ALONZO
I got it running fine but the results are not great for some reason when comparing the exact input image/prompt to wan 2.2...
Rahul Rabha
even Iam getting black image, Iam not using NSFW but trying to generate some hindu dieties. I don't know what Iam doing wrong?
adamaave
Can this model be used to create girls like in Flux? I tried to make a new model (with a detailed prompt), but instead I just get a black image. When I use a simple, random prompt, it generates normally. Any tips? I’m mainly working on NSFW content. Maybe I should look into a different course? I’d really appreciate any advice.
Cristo
When I try to use runpod, it says "memory 100%" then it crashes, I cant see the result of what im creating. How do I solve this?
Mike Reardon
I deleted my entire COMFYUI folder in order to install with a clean/fresh wipe. But now the auto install .bat file errors halfway thru downloading. did I delete/uninstall incorrectly?
Tibby
Which QWEN IMAGE quantization? 1) Q4_K_S ΓÇô GPUs < 12 GB VRAM RECOMMENDED 2) Q5_K_S ΓÇô GPUs 12-24 GB 3) Q8_0 ΓÇô Best quality, GPUs 24 GB+ Enter 1, 2 or 3: 1 -------- Checking prerequisites -------- -------- Downloading ComfyUI -------- % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 25 2028M 25 520M 0 0 2608k 0 0:13:16 0:03:24 0:09:52 1781k curl: (18) end of response with 1581838371 bytes missing Download failed. Press any key to continue . . . Not working bud
Aitrepreneur
use chatgpt
Jason G
Can someone point me to some good AI tools for generating prompts for image and video generation?
Xyzzx
Wait, wtf is an RTX Pro 96GB and how do you have one?
Adele Kaoki
IF you have low quality or lora not loaded errors after switching to nightly build, close it, go to the folder > update > update_comfyui.bat and let it roll until end. The manager update is sometimes halting midway, so this fixes it. I am, though, getting a lot of "Falling back to numpy dequant for qtype: 23" messages, you guys know any reason for that?
Roni Bliss
Qwen Lora training now available on the amazing AI-Toolkit!! - Check out Ostris the creators YouTube channel for Tutorial. The results already amazing, tested fast Lora creation on my RTX Pro 96gb VRAM
