Andrew Soderberg
patreon
Hero Me Workstation Stand (Gen4-Gen7)
🕑 Added 2023-01-14 15:59:50 +0000 UTCThis workstation stand will work with any combination of Hero Me compatible components (hotends, extruders, ABLs, fans, etc,).
In addition to Hero Me Gen7, this stand is also compatible with Hero Me Gen4, Gen5 and Gen6 parts.
The Hero Me Gen7 workstation stand uses six M3 8mm screws and six M3 threaded inserts. The M3 inserts to use are 4.6mm outer diameter by 4mm length (3mm is ok as well).
The stand will use four M3 14mm or 15mm screws to mount the Hero Me Gen7 Base and Gantry Adapter to the workstation stand.
Here is a link to download the STLs from Printables:
https://www.printables.com/model/368926-hero-me-gen7-workstation-stand
Comments
Andrew Soderberg
I am sorry but integrated extruder/hotends including the Creality Sprite on the Ender S1 Pro (along with the Micro Swiss NG, Titan Aero, BIQU H2, E3D Hemera, and the Bondtech LGX Shortcut), are not compatible with the current Hero Me design architecture (including Gen7). They are all too large, too wide, to fit into a Hero Me Base. The Hero Me was designed before these integrated extruder/hotend combos were developed. To make a Hero Me fit these assemblies it would no longer be a Hero Me as it would not be compatible with any of the hundreds of parts from both my Master Suite and the over 650 remixes and add-ons created by the community. On a more positive note, I have partnered with another 3D designer/ mechanical engineer to develop Hero Me based part cooling ducts with ABL mounts for the Creality Sprite and the others listed above. We hope to have them available in the near future.
Nate Johnson
does anyone have a parts list for the ender 3 S1 pro? I can't seem to find any files for it on the gen 7 file bank.
Andrew Soderberg
I downloaded the STEP file. I will review and see what is possible. Thanks for getting it.
Alain Thiré
Hey, Andy, here is the STEP files for the UM2 printhead: https://drive.google.com/file/d/1A5350Vp89GBVRsELX-B0YFghR_OVfWlM/view?usp=sharing
Andrew Soderberg
And the workstation stand makes that even easier.
Andrew Soderberg
Yep, the Hero Me Gen7 is a big improvement, and makes upgrades and part swaps much easier!
Michael Anthony
This is awesome! Going to make swapping out multiple parts so much easier!
