sora_
patreon
Xueyi nude&halfnude V2.4
🕑 Added 2023-12-27 04:56:13 +0000 UTCV2.4修复了贴图问题 / V2.4 Fixed the issues of texture
V2.3 修复了同屏的问题 / V2.3 Fixed issue with multiple targets sharing poses
V2.21 修复了F6的问题 / V2.21 Fix F6
V2.2修复游戏3.2版本MOD失效的问题（同屏同时存在时会出现问题，无法修复） / V2.2 Fixed the issue of MOD failure in version 3.2 of the game (When multiple of them are on the same screen at the same time, there will be problems and it cannot be fixed)
V2.1修复游戏3.1版本MOD失效的问题 / V2.1 Fixed the issue of MOD failure in version 3.1 of the game
修复MOD2.0失效的问题 / Fix the issue of MOD failure in 2.0
--------------------------------------------------------------------------------------------------------------
雪衣因为之前出现过所以能提前做不少内容所以出来的快，阮梅的这次没法提前拿到dump（准备吃阮饭了），可能要等晚上或者明天了
30合1，狠狠的压了压数量，有其他装配需求的可以QQ联系我，按H切换，按Y往回切换，有问题欢迎留言
Xueyi appeared as NPC before, I could do a lot of content in advance, so this Mod came out quickly. However, Ruan Mei couldn't be dumped in advance, you may need to wait for dozens of hours for Ruan Mei's Mod by me.
30 in 1, press H or Y to toggle, please feel free to leave a message.
说明：
1.如果只想要某个差分，你可以删除其他文件夹和merged.ini文件，然后打开你想要的那个mod的文件夹，最后将ini文件前面的disabled去掉（如果这个文件夹下缺少dds文件，请从第一个文件夹内复制），就能得到一个单独的MOD差分
2.如果要在启动的时候固定在某个MOD，可以用记事本打开merged.ini
找到下面的内容：
[Constants]
global persist $swapvar = 0
将0替换为你想要停留的MOD的数字（从0开始所以序号需要减去1）
3.如果只想保留其中某几个差分，可以打开merged.ini文件，找到以下内容：
$swapvar = 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29
将$swapvar后面的数字只保留想要留下来的MOD即可，如保留05 06 15 16 29 30这5个文件夹序号的MOD，就可以改成：$swapvar = 4,5,14,15,28,29
然后可以删掉不需要的MOD文件夹即可，注意没有保存序号为01的MOD的话需要设置上面2号说明中的启动时固定的MOD序号为保留中的一个
illustrate:
1. If you only want a certain differential, you can delete other folders and the merged. ini file, then open the folder of the mod you want, and finally remove the disabled in front of the ini file (if the dds file is missing in this folder, please copy it from the first folder) to obtain a separate MOD differential
2. If you want it to remain a certain MOD everytime game starts, you can edit merged.ini file
Find the following content:
[Constants]
global persist $swapvar = 0
Replace 0 with the number of MOD you want to stay in (starting from 0, so the serial number needs to be subtracted by 1)
3. If you only want to keep a few differences, you can open the merged. ini file and find the following content:
$swapvar = 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29
Keep only the MODs serial numbers you want to keep after $swapvar. For example, keep the MODs folder with numbers 05, 06, 15, 16, 29, and 30. This can be changed to:$swapvar = 4,5,14,15,28,29
Then you can delete the unnecessary MOD folder. Please note that if you have not saved the MOD with the serial number 01, you need to set the startup MOD number as one of the reserved ones
Comments
墨 泠
大佬有考虑过重置mod吗？就是做成像现在这样切换衣服部件，能比较方便达到自己想要的差分效果，而不是已做好的差分切换。。。
Yangao
牛牛牛！
に落ちる 夢
大佬能更新一下去虚化吗，感谢
