techoptimized
patreon
LG 2023-2025+ OLEDs - Final Optimized Settings
🕑 Added 2023-05-05 08:34:10 +0000 UTC
After years of incremental upgrades, LG 2023+ OLED Series dramatically improved upon previous years' models, especially since G3 and its brand new MLA panel.
Luminance is much higher, ABL is much more relaxed, TPC & GSR got fixed, all presets and processing got revamped, accuracy OOTB has never been so good so all my previous Optimized Settings needed to be renewed (especially for gaming)
It's almost like buying an OLED for the first time…again. :)
Like promised, here's my Full Setup - 1 Hour Video Guide along with my Ultimate Settings for it (use the video as a walk through menus/settings but apply the latest settings you can find below)
Optimized Settings for LG 2023-2025+ OLED Series:
Click for Full Screen
You can also unlock ALL settings and apply further tweaks by using the ColorControl app (on Windows). Read more
I'll try to explain the most noticeable changes below.
v18.3 Changelog (07/15/2025):
TruMotion: Cinematic Movement is now recommended again for Movies on 2023+ LG OLEDs: after latest July 2025 firmware, LG finally fixed it. No more noticeable Soap Opera effect, no visible artifacts and it's better at removing judders than my previous Custom preset. It also works good on both 24p, 30p and 60p video contents
LG G5 HDR FMM + HGIG Peak Luminance is now suggested at 2.400 nits (to be more accurate)
v18.2 Changelog (06/05/2025):
Added final Switch 2 Recommended settings: both for the console Display settings and TV settings. See the new red note
v18.1 Changelog (05/22/2025):
Changed recommended Color Temp from W50 to W45: to remove a slight yellow tint on whites (probably introduced after last few FW updates) while still remaining color accurate and within the D65 standard (used by all movies and games as well)
For people preferring a colder temp (for example if they watch TV in a bright room most of the time) I added W25 as a personal preference option. I don't recommend ever going colder than that or you will drift away too much from color accuracy and things will just become too bluish
v18 Changelog (04/12/2025):
Added LG 2025 OLEDs settings
Further reduced input latency when using ALLM/VRR + Filmmaker Mode for gaming (which is now virtually identical to Game Optimiser latency) thanks to the following changes compared to previous settings:
AI Game Sound: OFF
AI Sound Pro: OFF
A/V Sync: BYPASS
Added Switch 2 recommendations (based on what we know and have seen about it so far)
Restructured the chart with new, more complete settings (especially for Game Optimiser Menu) + better labels and notes for more clarity/readability during first setup
v17 Changelog (01/05/2025):
HGIG in FMM (enabled via ColorControl) is now preferred over DTM: this because
1) PC/Windows HDR Calibration cannot reach 4.000 nits (needed for DTM)
2) Most recent games are now providing in-game Peak HDR Luminance controls which can be set accurately for HGIG (or are directly supporting system level HDR calibration) and will look better than DTM when this is the case
3) HGIG enabled in FMM via ColorControl coupled with ALLM and/or PC Mode + 4:4:4 + VRR will further lower input latency compared to DTM
4) Some users are reporting occasional "auto-dimming" with ALLM + FMM + DTM. This isn't happening with forced HGIG in FMM
DTM remains suggested as an optional preference tho.TruMotion is now suggested to Custom: De-Judder 2, De-Blur 10: this is almost an exact match of the old (and sadly gone) "webOS 23 Cinematic Movement" (which I always thought was the best but now was replaced with the new and worse "webOS 24 Cinematic Movement" which unfortunately introduces noticeable Soap Opera effect). I've tried these new Custom values on regular TV, 24p Movies, 60p videos and other formats and it always looked good/smooth/natural but never once entering into noticeable SoE instead. Before making the change I also gathered some extra user feedback and it was very positive as well :)
Re-worded some suggestions to make it more clear/complete
v16.1 Changelog (11/05/2024):
Dialed down "Adjust Sharpness" value for Movies from 20 to 14: in order to eliminate all visible sharpening and flickering artifacts, even if very minor (especially in DV).
On LG OLEDs the Sharpness value up to 10 is not adding any sharpening yet, but it will just enable the LG upscaling algorithm (which will benefit sub-4K upscale by removing its aliasing while will usually ignore native 4K contents). In doing so, the image gets a bit blurrier so adding another +4 on top of it will restore its reference sharpness without visible artifacts.
For Gaming Sharpness is still recommended to 0 as both consoles and PC have their own upscale + sharpening algorithms (like FSR/PSSR/DLSS) and with 0 you will also ensure the lowest input lag possible.
v16 Changelog (10/22/2024):
Changed TruMotion suggested setting to User Selection - De-Judder: 2 ; De-Blur: 2 as the previous "Cinematic Movement" introduced noticeable Soap Opera Effect and motion artifacts after latest updates of webOS 24. Those custom values will still remove judders but without those artifacts
v15.6 Changelog (10/06/2024):
Changed "Prevent Input Delay" suggestion to BOOST: which you can still enable when using ALLM + FMM by temporarily switching to Game Optimizer picture preset, switching from Standard to Boost and then reverting to Filmmaker Mode picture preset. Boost will further lower input lag by 2-3ms for 60hz only sources (like Nintendo Switch)
Playstation Video Settings note below the chart updated recommending to enable VRR "Also for unsupported games"
Nintendo Switch red note below the chart updated recommending using "Game Optimizer" preset for low input lag (as ALLM and VRR are not supported) there
FTDA suggestion' wording made more concise/clear
v15.5 Changelog (08/26/2024):
After firmware 03.31.82 (for B3/C3/G3) and latest one for 2024 series, LG finally fixed the raised black levels when using VRR.
Now black level is perfect with Fine Tune Dark Area left to 0 when using SDR and HDR + HGIG (I've tested it with 6 different Black Level patterns to be sure!)
For HDR + DTM, FTDA was changed from -4 to -2 (to still compensate for a slight gamma raise inherent in the use of DTM)
v15.4 Changelog (07/10/2024):
I've found that enabling PC Icon/Mode coupled with 4:4:4 Pass Through: Enabled at the same time will provide a better image (more accurate and with less color banding) with even less input lag in all presets outside Game Optimizer (so including ALLM + VRR + FMM), even better if on real PC usage when you select YCbCr444 instead of RGB (like in NVIDIA Control Panel)
I've updated my PC Gaming Optimization Guide accordingly
I've explained a bit better in the chart (and in the relative note) that you should use PC Mode and/or 4:4:4 Pass Through only if you don't watch movies from that HDMI input, otherwise you should use any other HDMI Icon and disable 4:4:4 Pass Through (in order to restore all important Clarity options for movies as Smooth Gradation, Real Cinema, TruMotion, Super Resolution and more)
v15.3 Changelog (05/28/2024):Added PC Icon/Mode recommendation only for inputs where movies are not being watched: as most useful Clarity options (as Super Resolution, Smooth Gradation, TruMotion) will be locked out and cannot be enabled even when using ColorControl. If you don't watch movies, PC Mode will enable 4:4:4 and provide slightly better color banding while also lowering input lag in all presets
Added HGIG (forced via ColorControl) to ALLM + HDR FMM as a personal preference alternative to DTM: this will provide the absolute best and most accurate results for all those games which let you control Peak HDR Luminance while also further lowering input lag a bit compared to DTM. For games without Peak HDR Luminance control it may look a bit off (sometimes a little too dim or too bright with clipped highlights) but as my personal preference I still prefer it to DTM on LG G3 in most games I've played so far. That said I only game in a dark room and considering it will require fiddling with ColorControl app via PC and a wireless connection: ALLM + HDR FMM + (new) DTM remains the universally recommended setting for most on 2023+ series. If you also choose HGIG in the end, set back Black Level to 50 and re-calibrate system-level calibrations and games to your actual max nits (e.g. 800 nits or 1.000 nits for G2/C4 or 1.500 nits for G3/G4)
Fine Tune Dark Areas setting recommended to -2 when using HGIG (forced via ColorControl): for the most accurate black levels compared to VRR: Off
Noise Reduction and MPEG Noise Reduction are now recommended to OFF: I'm not sure if this started with most recent firmwares, but now with those enabled motion clarity took an hit with noticeable ghosting/smearing (especially on Apple TV) so universally it's better to always have those OFF right now. If you watch movies from very low res sources (analog/SD devices, low bitrate YouTube videos) you can try to turn them back to Low or at least MPEG Noise Reduction: Low for digital sources
For Nintendo Switch and Retro-Consoles (at low res) Super Resolution is now recommended to MEDIUM: still coupled to Sharpness 25. SR to HIGH was adding too much noise to the image
v15.2 Changelog (04/10/2024):
Added support for 2024 Series which basically shares the same suggestions except C4 HGIG Peak HDR Luminance to 1.000 nits (G4 is still 1.500 nits)
Paper White is now recommended at 276 nits for both G3 and G4
You can leave FMM DTM: On when using forced HLG HDR instead of SDR for Nintendo Switch
v15.1 Changelog (10/30/2023):
SDR, HDR and DV Black Level is now recommended from 50 to 49: this because:
-SDR Black Level at 49: will be slightly closer to BT.1886 gamma but with the benefit of not crushing details
-HDR Black Level at 49: will slightly improve DTM gamma accuracy for movies without crushing details and also making it closer to calibrated HGIG for gaming
-DV Black Level at 49: will slightly improve DV Cinema Home gamma accuracy for movies without crushing detailsXbox Refresh Rate is suggested back at 120hz: after latest console + games update, the few cases of severe flickering and stuttering (e.g. Halo Infinite) were fixed. If you are still experiencing them with some games, you can set 60hz only for them (just remember to go back to 120hz for all the others)
v15 Changelog (10/11/2023):
TruMotion is recommended to "Cinematic Movement" (again): after latest firmware updates, "Cinematic Movement" is back to my top TruMotion recommendation for Movies as it provides the smoothest and clearest motion without introducing noticeable SoE (Soap Opera Effect);
Sharpness is now recommended to 20 for Movies and 0 for Games: unless you mainly watch uncompressed 4K/HDR Blu-Ray Movies (where I still recommend Sharpness 0 for neutral value), Sharpness 20 will help in both upscaling and sharpening all other compressed/streaming contents without introducing haloing or shimmering. For Gaming, set it to 0 to further slightly improve input lag and avoid redundant overprocessing (as both Consoles and PC will already do the upscale + games already provide their native sharpening techniques);
Super Resolution and Noise Reductions are now recommended to Low for Movies: as those provide tangible signal/picture improvement without any noticeable downside. Super Resolution is tied to the Sharpness value, so in the case of Sharpness 20 + Super Resolution: Low its effect is very minimal, but is nice to have for compressed/streaming contents. Turn it Off for Gaming in order to keep input lag low;
Warm 50 is now the only recommended color temp: as starting from 2023 Series, LG really nailed the pre-calibrated temp out of the box and there's no need to use anything else;
Xbox Refresh Rate is now recommended to 120hz for whom mostly play at 120fps and/or 40fps, while to 60hz for whom mostly play at 60fps and/or 30fps (both cases with VRR active): this mainly because
@ 120hz + 60fps + VRR: many games have stuttering and/or flickering issues with VRR (Halo Infinite, Ghostwire Tokyo, Lies of P and many more). These are gone at 60hz + 60fps + VRR
@ 120hz + 60fps + VRR: you would have more color banding in gradients. Those will be better at 60hz + 60fps + VRR
@ 60hz + 60fps + VRR you would have very similar if not identical input lag compared to 120hz + 60fps + VRR
Obviously, if you need/want to play at 120fps and/or using 40fps modes, you need to set the console to 120hz
This doesn't affect PC, as for example G-Sync is always working better when Windows + NVCP are set to 120hz, along with all other PC Suggested Settings
v14 Changelog (08/30/2023):
SDR OLED Light is now recommended at 65: with a +-20 points adjustment depending on preference. The previous value of 80 was VERY bright, especially in a dark room (and especially on G3) so this may be a better starting value for most;
SDR Gamma reverted from BT.1886 to 2.2: this because after latest firmware updates for G3/C3, the entire black level floor was changed/fixed by LG around 2.2 both for SDR and HDR, along with the other changes below;
HDR Filmmaker, HDR Cinema and DV Cinema Home Black Level values reverted from 48 to 50: as, like mentioned in the point above, LG fixed all black level issues for the stock value of 50, making 48 a bit too crushed now. Setting it back to 50 will also make all those presets "future proof" for additional LG fine tuning, so without the need to manually changing them again;
When using the Forced HLG method for SDR-only sources (like Nintendo Switch), DTM is no more recommended: to avoid HUD elements to bee too bright, increasing the risk of image retention. I added this to the relative note below the chart;
SDR ISF Expert (Dark Room) is now recommended with ALLM: Off (with same settings for SDR Movies): while SDR FILMMAKER MODE remains suggested with ALLM: On. This way you will automatically have Super Resolution enabled for movies and disabled for games ;)
v13.5 Changelog (05/10/2023):
Just changed HDR Filmmaker Mode to HDR Cinema preset for Movies: as DTM is working differently between the two. HDR Cinema will have the "old" DTM which is better for Movies (which would be too dim/dark without it) while HDR Filmmaker Mode has the "new" DTM which is better for Games, being closer to properly setup HGIG results in highlights when games are set to 4.000 nits.
v13.4 Changelog (05/05/2023):
TPC & GSR got finally fixed by LG. No more need to access the Service Menu to Disable them: also avoiding risking your 5-years warranty. Finally, movies will not auto-dim anymore while the slight games' remaining auto-dimming when leaving them fixed on the same scene for over 5-8 minutes won't be noticeable during normal gameplay;
For these reasons, you can safely disable the "Screen Move" feature: as this always had a very small effect in preventing burn in, so with TPC & GSR properly working you can disable it to regain a bit more sharpness and you won't notice the entire screen moving around from time to time;
PC Mode & 4:4:4 are still Not Recommended: even if color banding and texts are very slightly improved when using PC Mode/Input Icon (or enabling the new separate "4:4:4 Pass Through" toggle), the EOTF and colors are getting raised, noticeably drifting from accuracy when using it. PC Mode is also no more necessary to reduce input lag outside of Game Optimizer preset as ALLM: On is sufficient in doing so. I also found that Xbox Series X (with YCC 4:2:2 disabled on the console) will still be able to output a 4:4:4/RGB signal in both SDR 8-bit and HDR @ 10-bit even when using the "Game Console" icon, then it's the TV doing the subsampling, further minimizing the few remaining PC Mode advantages;
Quick Media Switching is Recommended: if you have a capable/certified HDMI 2.1a cable, this will reduce the "black transition" you usually see when handshaking between different signals;
"GAME OPTIMIZER" Sound Mode is Recommended (for Internal Speakers): to unlock Game Optimizer gaming "profiles" (when using the Game Optimizer preset) but also to preserve the Game Optimizer Menu and options (including ALLM, VRR and Fine Tune Dark Areas) also when using "non-Game" presets for gaming. You can then perform an "AI Acoustic Tuning" and Enable "BASS BOOST" to improve the internal speakers' performance for your room, but it's highly recommended to just use an external soundbar or speakers for an actually better quality;
Using the Game Optimizer Menu (with ALLM: On) + SDR/HDR Filmmaker presets is a better alternative to SDR/HDR Game Mode + HGIG: with the same identical low input lag as Game Modes. This because it was measured that Game Modes are not only around 100 nits dimmer, but also have the new 2023 background "Dynamic Color Boosting" technology forcefully disabled resulting in 50% less luminous colors on the higher spectrum. LG has received the user feedback for also enabling it in Game Modes but, apparently, they're not going to do anything about it for now. "Dynamic Color Boosting" was the key new feature which was able to make LG G3 not only comparable to Samsung S95C QD-OLED's color luminance, but even surpass it most of the time in SDR/HDR Filmmaker for movies, so using Game Optimizer (with ALLM: On) and SDR/HDR Filmmaker will preserve "Dynamic Color Boosting" also for gaming while keeping the lowest input lag possible. The only thing to remember using HDR Filmmaker for gaming is to set both the system-level HDR Calibration and HDR games' Peak HDR Luminance to 4.000 nits whenever possible, while Paper White or equivalent should be set around 200 nits. Will it still be accurate without HGIG? Yes;
DTM is much improved, especially when coupled with HDR Filmmaker Mode: DTM now analyzes 20.000 different zones for each frame (!) instead of 5.000 and finally won't excessively overbright night/dark scenes anymore (I've already tested this with dozens of games and movies in different scenes and Peak HDR Luminance). What it does now is similar to what HGIG does: making specular highlights "punchier" and more pronounced (by always leveraging the actual Peak HDR Luminance of the TV, which is insanely high now around 1.500 nits on G3) without screwing up everything else. The only side effect is a slight elevation of black level which can be offset/fixed by just lowering the HDR Black Level setting from default 50 to 48 when using it. DTM is especially useful for completely replacing HDR Game Optimizer Preset + HGIG with HDR FMM, even in the long term (just remember to set games to 4.000 nits instead of 1.500 for G3 or 800 nits for C3 whenever possible, but if you can't: DTM will also better accommodate any other "fixed" HDR game as well) while it will have a very minor (but pleasant) difference in Movies (which do have metadata) between DTM: On and Off;
Prevent Input Delay: STANDARD is Recommended for always 120hz signals (as Xbox) while BOOST for 60hz signals: this because BOOST has no input lag effect with 120hz signals but could still raise gamma a bit. Better use it only for 60hz only signals (as Nintendo Switch or 60hz gaming on PS5). If you use a receiver with multiple consoles attached, leave it on BOOST. Gaming with ALLM: On + SDR/HDR Filmmaker Modes will force it to STANDARD;
SDR FILMMAKER MODE (with Color 55) and HDR FILMMAKER MODE (with DTM: On + Black Level: 48), DV Cinema Home (with Black Level: 48) are now Recommended for Movies: SDR/HDR FMM are the most accurate presets OOTB and the closest match to a Sony HX310 (30k$ Hollywood Reference Monitor 👀) using a G3, which basically means they're pre-calibrated from the factory and you don't even actually need an in-place calibration as you wouldn't notice any difference by naked eye after (crazy stuff!) and DTM: On on top of this is not making a big difference for Movies. For Dolby Vision the "DV Cinema" preset, instead, even if it's the most accurate on paper, presents visible black crush OOTB and a much more "muted" presentation over HDR FMM with similar "real-world" contents outside of patterns and benchmarks (even with DTM: Off), therefore DV Cinema Home is more universally recommendable as it's actually closer to HDR FMM with DTM: On (great) rendition: just decrease HDR Black Level value from 50 to 48 also for it;
SDR Recommended Gamma is back to BT.1886 both for Movies and Games: with just a minor Method: 22 Point Signal Level(%) luminance adjustment to improve dark detail;
Smooth Gradation: LOW is now Recommended for Movies: as this is very effective in removing basically all color banding and macroblocking artefacts without losing fine details. Unfortunately, it can't be enabled for gaming when ALLM is On so you may notice additional color banding in 4K/120hz/HDR10 games and the only solutions for this are waiting for LG to enable it also for gaming or just to improve color banding in games over time via firmware updates;
Noise Reduction and MPEG Noise Reduction to LOW are good now (for Streaming & TV): as those will preserve original film grain in movies while visibly removing macroblocking or other compression artifacts without ruining fine details. Those are Recommended for streaming services (with compresses their video sources by definition) and regular TV, but you may turn them off for 4K/HDR Blu-Rays;
Sharpness slider is much better than previous years: as even cranking it up to 50 will not introduce that bad haloing or over sharpening artifacts as before. You can literally increase it up to 20 to make regular TV & Streaming picture clearer, sharper and apparently higher resolution without any visible downsides. It's better to keep it at 0 or 10 for 4K/HDR Blu-Rays;
Super Resolution: Low does a good job coupled with Sharpness 20: as it will slightly improve texts and textures' definition without screwing up anything else or creating visible over sharpening artefacts. With Sharpness 25 its effect will noticeably increase and could only be useful for very low res contents (480p/i, 720p/i or bad 1080p/i), especially with Super Resolution: HIGH. Also notice this will increase input lag a small bit, so it's better to turn it completely off for XSX and PS5;
TruMotion: Cinematic Movement is good…but can be better: as for previous models, the new TruMotion: Cinematic Movement setting really helped in removing the inherent stutters of 24p contents but still didn't completely remove the noticeable Soap Opera effect in many scenes. On G3 I found that TruMotion set to "User Selection" with De-Judder: 2 and De-Blur: 2 provided the smoothest 24p movement without noticeable SoE. This has become even more needed with G3 as MLA and the increased brightness exacerbated the inherent 24p stutters on OLED panels (even with Real Cinema enabled). A correctly setup Motion Interpolation (with a 120hz panel) will solve that;
AI Brightness and all other AI Picture settings are now Recommended to Off in all modes: as those may have the opposite effects than wanted, for example further dimming the screen in already accurate modes (for a dark room) when small light sources are detected in the room or messing around with Color Temperature (which is great as is at Warm 50) or with skin tones and contrasts. You don't want that;
DV for Gaming was Not Recommended before and it's even Less Recommended now: Disable "DV for Games" on Xbox advanced video settings and stick with Game Optimizer Menu (with ALLM: On) + HDR Filmmaker (with DTM: On + Black Level: 48) + Console & Games set to 4.000 nits Peak HDR Luminance for the absolute best results for gaming. You can keep regular "Dolby Vision" for Movies enabled;
Fine Tune Dark Areas setting was changed to -4: to better reflect the black levels rendition between VRR: Off and On. Just remember that each preset and input (SDR/HDR/DV) has an independent FTDA setting to setup through the Game Optimizer menu;
2023+ Overall Settings Chart overhaul: all settings got renamed and reordered in a more coherent way to reflect the new TVs, many new settings were added and a lot of values got re-tweaked after new analysis and direct testing. So please, ignore any previous chart a re-start from here if you have a 2023 LG OLED or newer;
ALL my personally curated in-game Optimized Settings for 200+ HDR Games got updated and aligned for G3 and latest 2023 series' settings as well. You can find them by kindly following/supporting my work here.
Enjoy the next generation of LG OLEDs: Optimized! 😉
-P
Comments
Gideon Pioneer
But FMM and hgig clips at 2000, not 2400. You can verify by using Hitman
P40L0
v18.3 Changelog (07/15/2025): - TruMotion: Cinematic Movement is now recommended again for Movies on 2023+ LG OLEDs: after latest July 2025 firmware, LG finally fixed it. No more noticeable Soap Opera effect, no visible artifacts and it's better at removing judders than my previous Custom preset. It also works good on both 24p, 30p and 60p video contents - LG G5 HDR FMM + HGIG Peak Luminance is now suggested at 2.400 nits (to be more accurate)
P40L0
I think the issue started with one of the latest Windows 11 updates, not with LG firmwares. This is a note I added in my PC guide: NOTE: Starting from Windows 11 24H2 Build 4202, Dolby Vision may be automatically enabled system wide instead of HDR on specific displays. My advice is to turn it OFF in favor of HDR (by going into Display Settings -> HDR - > Expand the HDR options -> untick "Use Dolby Vision" ) as DV may have both a worse picture compared to properly setup HDR + HGIG and an higher input lag as well. I need to better investigate about QFT. For example if it's enabled by default no need to update the chart
Yehor Miniazev
Hello Paulo! After latest update (23.23.05) my G4 for some reason started forcing Dolby Vision mode when I turn on my PC. Nothing seems to have changed in my PC settings or drivers (using Nvidia). Is there a reason for that, or should I just switch back to HDR Filmmaker via ColorControl? Also, will you be adding this new Quick frame transport feature to the table or is this not impactful enough? Thank you for your work!
P40L0
Yes enable that ;)
Gideon Pioneer
Hi Paulo. One of the recent LG updates added "quick frame transport" option to the game optimizer menu. Should we enable it? Does it help reduce ms lag? Also, interesting - try going to PS5 video options, then information fornthe connected hdmi device, and toggle Quick Frame Transport on and off and look at the changes list!
P40L0
If with FTDA 6 you have similar black levels as VRR: Off there's definitely something wrong with your settings, probably a black level mismatch in the first place a FTDA 0 should be the same with VRR: Off with HGIG
Gideon Pioneer
G5: with VRR I find that "fine tune dark areas" set to 6 makes the dark area contrast similar/same as VRR off. At 0 it darkens the picture and converges some deep blacks than if VRR was off. "Near Black Level" is also a new option that was just added in 33.20.65 that works great for deep blacks at 1 or 2
P40L0
You can change sharpness not from Game Picture menu but from Picture Preset menu (and will be reflected also there) I recommend it at 0 for gaming. I would also enable AMD Freesync Premium only on Xbox and VRR/G-Sync only on PC and Playstation
Malitrox GamesNL
I have a question about the lg c3. In the GO menu, there is a slider called "Adjust Game Sharpness," which is set to 10 and greyed out. You suggest using the standard game genre, so I think this might be the reason. However, we want the sharpness set to 0 for a pure picture. Do I need to change this setting, or is it not actually being applied? My second question: I have both G-Sync and FreeSync enabled for all my consoles. The system automatically selects the appropriate one in-game, but are there any downsides, such as input lag? Should I enable only one of the two? Thank you for all your work. It’s amazing.
P40L0
For gaming only you can use both PC Mode/Icon + 4:4:4 Pass Through enabled at the same time
Dominic Scott
Ps5 gaming only. Would you recommend 4:4:4 pass through on or off
P40L0
Entrambi dovrebbero andare bene. Fra le due forse meglio 850 per essere sicuri
Drugo-_-Lebowski
Ciao Paolo ma con un c3 da 55 quando un gioco mi da la possibilità di scegliere tra 800 e 850 nit, cosa scelgo?
P40L0
Yes, but I think the tint was there for a while now. W45 now looks correct again
Steve Singer
New recommendation (W45) tested with FW 23.20.69?
P40L0
Make sure that the audio preset for Internal Speakers is set to Game Optimiser otherwise you won't enter in Low Latency mode also in FMM
Ashley Bordoy
The video settings are amazing, thank you. Quick question, I’m changing setting for the ps5 but when I change the mode to filmaker mode I am unable to enter the game optimiser menu to change settings in there and make sure vrr etc is on. Pressing just the gear icon doesn’t work (only works if the video mode is game optimiser not filmaker)
P40L0
FMM + (forced) HGIG via ColoControl is both brighter and more accurate than GO + HGIG for gaming and with the same input lag when coupled with ALLM/VRR. SDR ISF Dark is identical to SDR FMM with same settings. I only choose it for ALLM to switch different presets between games (FMM) and movies automatically. HDR Cinema + DTM for movies for the same reason but also because FMM + DTM for movies is too dim/dull. DV Cinema Home also because DV Cinema/FMM is too muted for movies.
TJ Meehan
I just got a G4 and so glad I found this page but I do have one question: Can you clarify why FMM specifically is "best" for gaming but cinema / cinema home / isf dark are best for media? I noticed that HDR cinema and home are brighter, but does that mean it's too inaccurate for games (and if so why is it okay for media?) Or is it just to keep those presets separate from each other? Is it because "Dynamic Color Boosting" is only available in FMM? Is FMM just lower latency for some reason?
P40L0
I tried to consolidate everything in a single chart for all people, so I suggest to open the chart full screen on a laptop or print it while setting up the TV. It should be much easier this way.
Hope
Would it be possible to make a sheet per platform in the future? I mostly check for the Xbox settings every now and then and it's kinda difficulty to not get lines mixed up. And I assume most people are only interested in their specific platform + the TV settings. Either way, I appreciate all you do!
Derrion
I agree, when I’m gaming on the G4 i turn off gsync and just use adaptive sync and an app called special k
Kaaaaaaaarl
Can I get rid of the VRR flickering somehow? I'm playing on PC and it's really annoying.
P40L0
v18 Changelog (04/12/2025): Added LG 2025 OLEDs settings Further reduced input latency when using ALLM/VRR + Filmmaker Mode for gaming (which is now virtually identical to Game Optimiser latency) thanks to the following changes compared to previous settings: AI Game Sound: OFF AI Sound Pro: OFF A/V Sync: BYPASS Added Switch 2 recommendations (based on what we know and have seen about it so far) Restructured the chart with new, more complete settings (especially for Game Optimiser Menu) + better labels and notes for more clarity/readability during first setup
P40L0
Probably the TV is auto changing HDMI icon when you do that change. Double check and revert to the icon you were using before
Franru
I've come across something strange that I don't know if it has been mentioned, and that is that the configuration of my PS5 changes completely when I turn my earc sound system on or off, so console configurations such as the RGB range or the HDR configuration are different.
P40L0
Yes
yooooo
Is this the same for the lg g3?
P40L0
Custom TruMotion: De-Judder 2 , De-Blur 2
yooooo
What is the best trumotion setting for Software version 23.20.44 LG g4?
P40L0
It's better than G3 but still dimmer on average than FMM. If the average brightness is ok for you, you can go for it + HGIG
Emil Mathisen
Is game optimizer fine for g4? Id rather not use the app
P40L0
They're literally identical when setup the same
Curtis McCarthy
Is there any downside to using ISF dark rather than filmmaker? Idk if slightly more latency or any other issues.
P40L0
De-Blur by default is already at 10 when you enter in Custom TruMotion settings. It means to eliminate blur on all movements leveraging the 120hz+ panel and does NOT introduce Soap Opera Effect: that is the one to avoid like the plague and it's tied to De-Judder option instead (which by default is 0 for this reason) You can go as high as De-Judder 2 to make movement less juddery and natural WITHOUT introducing Soap Opera Effect. Anything higher will start introducing it more and more.
Sam Peddie
You have recommended Tru Motion De-Blur should be 10 for movies. Is this not quite high? Most recommendations seem to suggest Tru Motion should be completely turned off?
P40L0
Yes it should
Larry Wesby
Hi, I was wondering if rgb range should be limited on ps5 pro as well
P40L0
Both
Hasnain
Are these settings for WebOS24 or 23? Or do they work for both? My B3 is asking me to update to WebOS23 so wondering if I should update if it would change or affect anything
P40L0
You need to match Limited range both for the Console/PC and the TV or you will have a black level mismatch
Franru
I'm testing Arkham Knight with SDR settings and selecting limited range instead of auto makes it look very dark and loses detail in areas like the cape or gauntlets. Should I turn up the game brightness or am I missing some previous settings?
P40L0
Like written in the chart, you need to use ColorControl app via PC to "force" enable HGIG also in FMM. I've made a guide on how to here: https://www.patreon.com/posts/77041300
Vlad760
LG C3 newest firmware. I use Series X and PS5. I cant use/access HGIG while in your recommended FMM+ALLM, 4:4:4 passthrough, PC mode icon settings, only DTM on or off. To use HGIG I need to use Game mode. What should I do or recommendations? Thank you 🙌
P40L0
22 points (it's written in the chart) and only for SDR
Tyler Pickney
In white balance, do we set method to 22 points code value or leave it at 2 points?
P40L0
Exactly, that's not practical at all and honestly I would just stick with HGIG and adapt the things when you can. If you can't: highlights may look a bit less bright or a bit clipped in the upper end but whatever, that's still better than changing things all the time
Geoffrey Roman
I switch back and forth between FMM+HGiG and Game Optimizer+DTM on PS5 based on peak brightness support in-game. I’d prefer to stay in FMM and only switch between HGiG and DTM but that’s not practical as I’d have to launch Color Control fairly regularly.
P40L0
Why you can't access ColorControl? Are you on a Mac? If yes try dual booting with Windows and just use ColorControl app once or just borrow a Windows laptop only to set HGIG one time and you can land it back. If for some reason you can't do any of that, yes, still use ALLM + FMM + DTM
Makoto64
Hey man If I can't get access to color control app is it still recommended to use these settings for gaming with DTM on instead of game optimizer because it has hgig and are these settings accurate?
P40L0
Elden Ring can go up to 2.000 nits so it can be set accurately for HGIG but if it's still too dim for you you can switch to DTM I also recommend HGIG for 2023+ OLEDs (because it's brighter with ALLM + FMM), while on previous models Game Mode + (old) DTM is still the recommended one.
Dominic Manganiello
Now that you're recommending HGiG instead of DTM, does that include games like Elden Ring where you specifically recommended DTM?
P40L0
Windows HDR test can't go past that and it's not the whole picture. DTM is in fact based on standard tone mapping of both HDR Cinema/FMM and Game presets which targets 4.000 nits on all LG OLEDs since 2017
Hasnain
How do you test what peak brightness Dynamic tone mapping is built for? You said it’s 4000, but on my LGB3 I am getting 2500, maybe because it’s a B model. I got this because that’s when it clips on windows HDR test but also that does not go to 4000
Derrion
I believe this is normal for OLED gaming monitors, but is there any way to reduce the OLED flickering when gaming on a LG G4 55inch?
Drugo-_-Lebowski
Grazie mille!
P40L0
2.2
Drugo-_-Lebowski
Ciao Paolo e grazie per il tuo ottimo lavoro. Ho un C3, per i giochi in sdr consigli gamma bt1886 o 2.2? Grazie
JohnboyX
Received the update and there does not seem to be any improvement in brightness when callibrating with the Windows HDR App in Filmmaker Mode with HGIG forced on via Color Control (even tried disabling and enabling HGIG again to be totally sure there's no firmware bug introduced). Still clips at around 1470 to 1480 nits like before. Not that I'm complaining since that's still more than enough peak brightness and at least the TV menu got more responsive/faster which is still more than welcome 😊 .
Антон Батарейный
Yes I know But I can change this settings The are close for me
P40L0
Picture Settings -> Advanced -> Clarity Options -> Go to bottom and select TruMotion: User Selection, then you can change De-Judder to 2 and De-Blur 2 there -> go always back to save
Антон Батарейный
Hello sir How you change TruMotion ? Because my settings are close
P40L0
Yes, it regards all 2023 and 2024 models after latest updates
Moxify
v16 Changelog (10/22/2024) question. You changed from Cinematic Movement to User selection in all picture modes (SDR, HDR and DV content modes)? :) Should that be done on the C3 aswell?
JohnboyX
Thank you will do this and report back once the update finally hits my TV as well !
P40L0
+300 nits seems unrealistic to me, but to be sure turn off the lights (so be in a dark room) and then try going into Windows or Xbox HDR Calibration app using HDR FMM + HGIG and see if you can still clearly see the patterns in brightness squares above 1.500 nits and report how far you can go (just stop at the click which will totally hide it in the white background. That's your actual new limit...if any)
JohnboyX
Hello, this german dude https://m.youtube.com/watch?v=tLcGhVt9s1s mentioned that after extensive testing the LG G4 apparently got a huge brightness boost of over 300 nits in both filmmaker and game mode on the latest firmware update while the overall heat on the panel has also been reduced massively which is just INSANE 😲 ! My question that now since filmmaker mode will be able to reach about 1700 nits according to his analysis what are the values I need to change in nvidia profile inspector (also for 1600 nits) to get this with RTX HDR in games and movies ? Of course I already followed all your recommendations closely including forcing HGIG in filmmaker mode with Color Control. Thank you very much in advance for taking your time and for writing such amazingly detailed guides. They helped me a ton to get the best out of my TV and PC for gaming/movies 👍 .
P40L0
No, DV FMM is identical to old DV Cinema preset (which was and still is too dark/dim for movies), so my settings still apply after the update
Tyler Pickney
I noticed C3 and G3 have gotten Dolby Vision Filmmaker Mode through an update. Is this worth using or stick to your current settings?
P40L0
PC + also enable 4:4:4 Pass Through and ALLM, then yes: use SDR/HDR Filmmaker presets instead of Game Modes
Антон Батарейный
Hello sir . A just little question Witch HDMi icon I should use only for gaming (PlayStation ,Xbox ) pc icon or console ? And always FFM?!
Илья Ксендзов
Thank you very much for your help!
P40L0
There's no need to touch White Balance in HDR or DV, it's already perfect as is. In my chart there is a "/" symbol which means not applicable there. The White Balance change in the chart is only for SDR.
Илья Ксендзов
2. Sorry, but I don't quite understand. I have "Method: 2 Points" by default, and if there is no need to change the white balance for HDR, then I assumed that I should leave it untouched, but you answered - "no".
P40L0
2. No, there is no need to change White Balance for HDR HDR 5. PC Mode + 4:4:4 are more important (lower input lag even outside Game Mode, no chroma compression)
Илья Ксендзов
Thank you for the quick response. 2. I should leave “Method: 2 Points” for HDR, right? 5. I managed to enable “Super Resolution,” but only after disabling PC Mode/HDMI icon and 4:4:4 Pass Through. In your opinion, which is more important: “Super Resolution” or PC Mode/HDMI icon + 4:4:4 Pass Through?
P40L0
1.Use AI Sound Pro audio preset for movies inputs, Game Optimizer audio preset for gaming inputs. 2. No, the method adjustment is only meant for SDR 3. Means low resolution/quality contents (SD, HD or FullHD broadcast via antenna or cable for example) 4. Yes you should 5. Strange, you should. Try using PC Mode/HDMI icon + enable 4:4:4 Pass Through on top for Switch, then use SDR Filmmaker Mode and see if you can enable it from there.
Илья Ксендзов
Hello, thank you for your work. I have a few questions: 1. I am unable to enable both “AI Sound Pro” and the sound select mode “Game Optimizer” at the same time. What am I doing wrong? 2. In the HDR Filmmaker mode settings on PS5, there is a “Method” setting, but in your table, this setting is not included for HDR content. Should I adjust this setting similarly to SDR, or should I do something to remove this setting? 3. What does “bad 1080p/i” mean? 4. I’m also interested in whether I should enable “Apply to unsupported games” in the VRR settings on PS5? 5. Lastly, I am unable to enable super resolution, as you recommend for the Nintendo Switch.
Patrick
Thank you!
P40L0
Unfortunately Switch doesn't support ALLM so you either have to resort back to Game Optimizer preset or you may try changing the HDMI Input Icon to PC and also enable 4:4:4 Pass Through option on top of it. Just remember to re-enter all settings after the icon change. Input lag won't be as low as Game Optimizer but still decent for gaming even in FMM this way.
Patrick
Should’ve read further down, you’d already answered the Switch Latency question! Thanks for all the great answers!
P40L0
I've 03.31.82 right now with no new firmware available at the moment. I'll let you know.
VentusMaster777
Hello, did you update the G3 to 13.40.75 version? I've seen people on various forums saying the update improved the image quality. Most noticeably in brightness. Wonder what your thoughts are if you have it installed already☺️
P40L0
Yes and yes :)
Moxify
Nice, does that also include for the C3? Is it great for HDR youtube videos aswell?
P40L0
Because HDR Cinema has the "old' DTM algorithm (coupled with the new analysis zones) which makes movies look better. ;)
Moxify
Hi. What was the main reason you switched from filmmaker to cinema mode for HDR content? :) Looks amazing though
P40L0
I think DV with suggested settings looks perfectly fine and there's no other tweaks needed (for now). SDR/HDR settings cannot be applied 1:1 to DV, it's a different signal/format.
Moxify
Nice… Do you mind the little cornyness in DV content? Have you also tried to for example use your SDR or HDR modes for DV content aswell? Thoughts? Have a wonderful saturday.
P40L0
0 reasons to worry. Consider that I've sold my old B7 to a friend (which still has all my Optimized Settings for it) and without all the new anti-image retention/anti burn-in features newer sets have it still looks perfect after over 7 years! Newer models should last even longer.
Moxify
Ok then I dont have to worry about my TV being broken or something. Do you prefer that? I feel DV movies are PERFECT in every way but just got a little unsure when it comes to the cornyness if you understand. But probably something all get used to and not think about after a while :)
P40L0
Yep, that's a mix between much higher res (4K), much wider brightness range (HDR) and color space (DCI-P3). ;)
Moxify
Thank for the reply. One more thing about DV movies. Think that content is best when it comes colors and details but I feel those are a little more «corny» in a way than for example 4k SDR movies, HDR YT videoes, etc. Should it be that way due to the «Cinema feelings»? :)
P40L0
No, those won't change blurriness at all. My changes actually increase definition/sharpness (as Noise Reductions: Off) so it's probably placebo
Moxify
Tried to watch House of The Dragon in Dolby Vison but I kinda felt its a little blurry now? I do own a C3. It could be my in my head… Only changes from your updated guide in DB is black lvl from 48 to 49 but dont believe that cause it. Could it be something with the Truemotion settings? The pre change from User Selection (2 judder) to Cinematic Movement?
P40L0
It may be locked to Auto when using webOS apps. It's normal (as it would still be Limited). If you want peace of mind you can use ColorControl app via PC to force it Limited, but it should look exactly the same.
Moxify
Hi again. One more thing about SDR(Filmaker mode) and HDR (Cinema mode) settings. I can see SDR and HDR Video range is locked at «Auto». It says them both should be set to «Limited». You know the reason? :) Dolby Vision settings are fine as they should be now
P40L0
Yes :)
Moxify
Ok, then Ill keep HDR Filmmaker mode for my PS5 gaming but with your new changes. About something else when it comes to SDR/HDR/Dolby movies via TV. I have your current settings from the first youtube video guide at this point and it looks stunning. Will it even get better if I insert your new updated final optimizer settings? :O
P40L0
If you only game on PS5 you can try enabling PC Mode (PS5 HDMI Icon set to "PC") like suggested in the new chart + also enable 4:4:4 Pass Through and then re-enter all the settings (as changing an HDMI icon will make you start "fresh" with a new/separate batch of settings for that specific icon) Then I would still leave ALLM enabled on the console for lowest input lag possible in games, but if you only game you can choose HDR FMM with same gaming settings both when you're inside games AND outside games, so ALLM will always use FMM no matter if you go back and forth games. Just remember that if you also use "HDR: On When Supported" like suggested, PS5 dashboard will be in SDR so you need to apply SDR settings for FMM there.
Moxify
Oh I see. I do only use my PS5 for HDR gaming games. So it should should still be at HDR Filmaker mode as picture mode like in the first place? :) But only with those tiny other changes like fine tune dark areas, black lvl, sharpness etc?
P40L0
SDR OLED Brightness for Movies is 65 (+-20), this means that you can start from 65 and increase/decrease 20 based on your room light condition and liking. So 80 is good (with SDR Peak Brightness also Off) ;) On PS5 HDR Cinema preset + Movies settings should be used...for movies, which when using ALLM means the console will use it every time you're outside a game. When you enter a game, ALLM should auto-trigger HDR FMM with games' settings (which you can find both updated in the chart). Enjoy :)
Moxify
Hi. Just received my 55 C3. Copied everything from your first youtube guide and it looks stunning. Then I saw you made an updated guide (EXCEL) for the final best optimized settings. There is some changes I see but I wanna change them to make it look excactly like yours :) But I do have some few question that I dont understand. I saw you reduced SDR movie OLED brightness from 80 to 65. Im happy with 80 so Ill keep that. But need a little support when it comes to PS5 HDR gaming. I see you put HDR Filmaker mode and «use HDR cinema + movie settings» as picture modes. What does that mean? I saw you set HDR filmaker mode in the first video guide. Should it stay be the same mode for this update guide aswell? Would appreciate some support :) Thanks
P40L0
HGIG enabled in FMM will be a bit more accurate and better looking (for games where you can exactly adjust Peak HDR Luminance) + it will also have a slightly lower input lag. Nothing dramatic tho. You can try dual booting Windows via Bootcamp or just borrow a family member or friends' PC with Windows to use ColorControl. You only need it one time to change it, then the change will stay forever (even after TV firmware updates)
Tyler Staub
I do not have a PC. Only a Mac and Android products. It appears I will not be able to use HGIG from within FMM...Does this mean my best bet will be FMM with VRR, ALLM on? What will I be missing with no HGIG in FMM? Are there any work arounds I can use?
P40L0
All suggestions are the same as before (yes, use VRR for games along with ALLM: Enabled and FMM instead of Game Mode. Then choose DTM or HGIG based on your preference. Personally I use HGIG in FMM enabled through ColorControl app). When using DTM set Peak HDR Luminance to 4.000 nits (FTDA -2 now instead of -4). When using HGIG set Peak HDR Luminance to 1.500 nits in your case (FTDA 0 now instead of -2). For SDR also use FTDA 0 now. FTDA will only apply when VRR is enabled. It won't do anything with VRR: Off
Tyler Staub
Question regarding v15.5 Changelog (08/26/2024): After firmware 03.31.82 G3 I have a G3 with PS5 setup Should I now leave VRR on? And ALLM both? Should I still use DTM in filmmaker mode? Or HGIG in game optimizer mode? Have the fixed HGIG on lack of color boosting?
P40L0
No, 4:4:4 should only be enabled on "gaming-only" inputs (as it locks many useful settings for movies) so, yeah, in your case you can enable 4:4:4 only for the PC input to separate from all the other (if you game only there) and use any other HDMI icon you like for the receiver HDMI.
Tyler Pickney
On G3, enabling 4:4:4 passthrough applies to all inputs correct? I currently have all my devices connected to my receiver including my PC, but was curious if I could have 4:4:4 passthrough enabled just for HDMI 1 if I chose to only have my PC connected to my TV while my receiver for all other devices uses HDMI 2.
P40L0
Yes as DTM in FMM is not "dimmer" (highlights will actually be brighter) but more accurate (better Gamma, more contrast). Also that is not "auto dim", it's just the old DTM gradually switching to the new one when you switch preset. If you stay in FMM with DTM it won't auto dim... You can force HGIG in FMM via ColorControl for the best of both worlds. Switch HDMI input Icon to PC to enable PC Mode then go enable 4:4:4 Pass Through as well (it works for me on an actual PC so maybe double check all other settings as well)
Omar Mansour
Also how do I enable 444 and PC mode? When I change the game console icon to PC it blocks out 444
Omar Mansour
Is it normal for DTM on FMM to be noticeably dimmer than DTM in GO? It autodims when I switch to FMM. Also DTM on FMM is very similar to HGIG on GO and honestly I feel the color is better on GO?? FMM adds a brightness filter it almost looks like. Like bloom.
P40L0
Enjoy! :)
DragonTribes
No banding anymore on my C3 with Xbox Series X ! Thank you so much P40L0 for the update 🙏
Tiago Camargo
Thanks for the settings and the quick reply! I tried to replicate the settings with Game Optimizer and quality was subpar compared to forced HLG HDR and FILMMAKER . I will give PC mode a try tonight.
P40L0
Yeah as Switch doesn't support ALLM... You can try using PC Mode / HDMI input icon to lower input lag or switch to Game Optimizer preset to have the lowest input lag possible (but with reduced picture quality)
Tiago Camargo
Low latency becomes OFF if I set FILMMAKER mode with my Nintendo Switch. Is that expected? Thanks!
Geoffrey Roman
Thanks a lot for the valuable info and the great work!
P40L0
DV Cinema is OK only when watched in a pitch black room and if you use it you have to revert to Black Level 50. In my opinion is often too dark even in a dark room, that's why I recommend DV Cinema Home with Black Level 49 for most scenarios.
Geoffrey Roman
Thanks, also I see you recommend using DV Cinema Home instead of DV Cinema. Does the recommendation still applies in my case for absolute PQ accuracy? If I have to choose DV Cinema, does I have to change black level to 49?
P40L0
No, only use BT.1884 for SDR movies. Leave SDR games at 2.2 (as they're graded for it in mind)
Geoffrey Roman
Thanks for these incredibly detailed settings for our TVs. I have a C3 and prefer to track Gamma 2.4 instead of 2.2, as I mainly watch movies and play games in a dark room. Do I need to change other settings in this case?
P40L0
You can use PC Mode if you only game, but possibly don't use RGB Auto or Full but Limited whenever possible instead (yes, even in PC Mode as these TVs are internally pre-calibrated for Limited, not Full)
Shploink
Thank you. And is it fine to use RGB range auto/auto on both PS5 and LG C3 in PC mode with 4:4:4 if I only game?
P40L0
FTDA will do nothing with VRR: Off
Shploink
So if no VRR is used, like in a PS4 game running on a PS5, then FTDA should be 0?
Shploink
I only use my LG C3 for PS5 gaming. Is it ok to set the RGB range to auto/auto on both console and TV?
P40L0
FTDA is related to VRR in general so, yes, also SDR
Shploink
Is fine tune dark areas -4 needed for SDR gaming or should I leave that at 0?
P40L0
No, calibrated G4 in HGIG is still clipping at 1.500 nits like G3, so you can use the same settings for it.
Edvin
What about G4 settings it is about 100 nits brighter then G3, and due to alpha 11 chip it will just get better over upcoming patches?
P40L0
Yes, C3 is also using it.
AraMitama7
Hey P40L0, thanks a ton for your work ! I have a couple questions : Is it confirmed that the C3 also comes with “dynamic color boosting” ? I can’t tell the difference switching back and forth between game mode and FMM in SDR, 65 OLED light looks the same as 100 OLED light in game mode, in both brightness and color. I can see a difference in HDR, but it seems to only be the case when using the new FMM DTM ?
P40L0
Dolby Atmos still as some audio delay when using it from Xbox so I still recommend usind DTS Surround there. Other than that, yes, Bypass on the TV is not needed as A/V Sync is fine with just the Pass through enabled and Sync value set to 0.
Juhi Rajani
Just last question as my hubby brought q95 9.1.4 lg meridian soundbar also is a sync issues are fixed by lg as I am seeing buddy now you aren't recommending bypass in earc as a sync issues were always problem with external speakers system with lg oled series that's all for today Paolo🤗🤗
P40L0
Because as I explained in both my video and my article, starting from 2023 series LG OLEDs now have an invisible/background feature called "dynamic color boosting" which will automatically maximise the luminance of specific colors to match if not even surpass QD-OLEDs results. It works reallly well on all presets...except Game Optimizer ones, where it is forcefully disabled by LG there and you can't re-enable it manually. The difference is very visible on yellow/orange colors and light sources and you'll also get around +100 nits average outside Game presets. Coupling ALLM + SDR/HDR FMM + the new DTM (or forced HGIG in HDR FMM preset via ColorControl if you prefer) + VRR, you will basically preserve the low input lag of Game Optimizer while also keeping the new "dynamic color boosting" algorithm and the +100 nits brighter picture all at the same time ;) You can't use the "Boost" input delay when doing so but it's a non-issue as Standard is perfectly fine when the console (like XSX) or PC is already set at 120hz: you would already have the lowest input lag possible when doing so. Also apply all my other suggestions for it in my latest table and you will be fine both for movies and games.
Juhi Rajani
Hey buddy hope you are doing well I finally got surprise from my sweet hubby 77 g3 i am looking your settings now I am honestly confused why you are recommending filmmaker for hdr gaming as hdr game mode and filmmaker seems almost same to my eyes plus after installing latest firmware I am unable to change prevent input delay from standard to boost what would be the issue as I am unable to understand it's stucked on standard unable to change on boost kindly help as I am yelling like anything on my hubby😕😕
W90 82
Thanks!
P40L0
Yes, follow the webOS SDR/HDR/DV columns also for it ;)
W90 82
Hello! What are your recommended settings for LG G3 on Apple TV? Should I follow one of your columns in the spreadsheet?
Adam Siemiński
PS4 Pro doesn’t have VRR as well, so in the end it’s either Game Optimiser or PC mode. Or a hardware upgrade :p Thanks for clarifying!
P40L0
You can by enabling VRR, which will also trigger low latency without ALLM. Otherwise the only way to lower input lag is using PC Mode / HDMI Icon, but it would still have a bit higher input lag compared to ALLM and/or VRR
Adam Siemiński
Thanks for the guides, really helped me get around my new TV! One issue is still bugging me though: is there a way to enable Low Latency:ON in FMM without ALLM? Or am I stuck with Game Optimiser in such case? Tried the Input Lag (different setting, I know) in ColorControl, but nothing changes, in the game panel it still says it's OFF. I'm talking specifically about PS4 Pro, which doesn't support ALLM.
P40L0
Try that and see if it's improving
Valdrin Zeqiri
Hi, Many thanks for your work! I want to use FMM + ALLM + DTM, like your settings in general. But something is annoying. For example, Gran Turismo 7: I have a 77 C3, and when I set the HDR settings with 25 clicks like in your PS5 HDR posts, the sun is looking very ugly and unrealistic. Too bright without any transitions. The same with Cyberpunk 2077: When I set the brightness value to its maximum, the light bulbs are looking very ugly at night too. Another example from Spider-Man 2: The faces of the NPCs during daylight have too much contrast, and this is looking very unrealistic. What can I do? Re-calibrate the PS5 HDR settings with 14 clicks, like HGIG? Many thanks.
W90 82
Thank you! I just want to say that I initially subscribed to your channel as a one time trial but after seeing your responsiveness and knowledge, I will be renewing my subscription. Happy to support someone who is doing great work!
P40L0
1. Yes, spreadsheet is always the most current, so go 49 2. Yes and it will work not only for Blu-Rays but also for PS5 streaming apps like Netflix, Prime Video etc. Only when you launch a game ALLM will trigger and switch to different presets presets (SDR and HDR Filmmaker Modes in this case) 3. Neutral 0 is best for games as the consoles/PC are already doing the upscale and sharpening passes + this will further lower input lag a bit. But for movies, Sharpness up to 10 will make the TV only do a good upscale and the +10 after will do a very slight sharpening pass which will help sub-4K but also streamed 4K definition without any visible side effect at all 4. Mmmh, this shouldn't happen. When watching movies the Game Optimizer bar shouldn't appear as ALLM will quit low latency and restore all Clarity options in HDR Cinema. Maybe double check in PS5 settings that ALLM is enabled and VRR is enabled only for gaming too (it should auto disable outside games as it should)
W90 82
I just snagged a G3 last week and your settings are like gospel - a complete game changer! I had a few questions: 1. Your most up to date spreadsheet says to set black level to 49 but the YouTube video and some older posts say 48. Should I assume that the spreadsheet is the latest and most up to date value, hence 49 is correct? 2. When playing a 4K blu ray on PS5, the spreadsheet says “use HDR cinema + movies settings.” Does this mean that after setting it to cinema mode I should follow the settings in the column titled “webOS HDR | movies.” 3. I’ve always heard that neutral or zero sharpening is best but you’re suggesting a pretty high value of 20. Do you find any issues with this? 4. When playing a 4K blu ray on PS5 in cinema mode, should anything be changed in the game optimizer menu? I noticed that VRR and ALLM are still enabled when watching a movie. Sorry for bombarding you with questions. Hope to hear from you soon!
Chris Beccarel
Ok understood 😊thanks for your quick replies 😊. Regarding my issue is in WHITE BAL./Method I'm showing a" 22 points Code Value" and "Code Value 1023" for HDR Movie and Gaming instead of Signal Level is that normal?
P40L0
Always HDR. Disable DV completely for Games, you can keep DV on for Movies
Chris Beccarel
First I wanted to ask you when playing a remastered XBOX series X game (GTAV in this case) which mode will give a better picture quality HDR or Dolly Vision?
P40L0
What issue?
Chris Beccarel
Hello, I'm having some issues with my brand new G3 and latest firmware. For some reason I'm having an issue matching your gaming HDR and DV gaming settings.
Robbie nash
Great settings and a great person with fast responses to any questions I had on Reddit, happy to support :)
LT
Thank you for the awesome work and updates!!! „after latest firmware updates“ It would be helpful if you added the firmware version the new settings are based on, since LG doesn’t release firmware globally simultaneously. Thx :)
P40L0
Because on C3 using Game preset is no more needed with ALLM + FMM + DTM, and with this Input Delay is fixed on Standard ;)
Fizz
Hello again :) Short question! Why input delay on C1 on Boost and on C3 on Standard?
P40L0
Usually it means "Not applicable" if it's alone, otherwise if it has 2 values the black one is the recommended one, the gray one is personal preference.
Aaron Bertinetti
What’s the meaning of “/“ in the spreadsheet cells, particularly with regards to the signal levels?
P40L0
Nope
HRILEN JONES BIÉ
And for 2019/2022 models like the lgcx there's an new update of settings calibration?
Fizz
Thank you!
P40L0
You can read more here: https://www.patreon.com/posts/68309490 and here: https://www.patreon.com/posts/78943775
Fizz
Why calibrate 4000nits for dtm? Other Channels like GamingTech do it all with the correct peak brightness of the TV and uses it for hgig and DTM!
CaveColeman
Awesome thank you!
P40L0
TV side it's done with the latest 2019-2022 chart (but as stated you can try the 2023 one on it and see if it further improves or not), while for games side sure, for each game I will always provide the best HDR settings for all LG series and even suggestions for other TVs as well
CaveColeman
Sounds good! I support best setting you will have for c1 lol. You will still have game setting for it?
P40L0
I've replaced my C1 with G3 so I couldn't test it right now, but if feedback from users will be positive I could start recommending 2023 settings also for previous series as well ;)
CaveColeman
Okay I'll have to watch it then. Just wanted to make sure I was selecting everything correctly. Will you eventually test those settings to see if it is better and if so update us? Thank you
P40L0
No, I think that this one may be enough to show how everything works while the specific settings for 2019-2022 Series are in their relative chart. That said, a lot of people are telling me they tried my 2023 settings on both C1 and C2s and now those are looking even better than before, so you could also try that (but just keep in mind that I've only directly tested them on a G3 for now).
CaveColeman
Would you make a video for the ultimate settings for lg c1?
