jeffquitney
patreon
Maintenance and Servicing of C-1 Autopilot 1943 US Army Air Forces Training Film AF-224
🕑 Added 2019-06-23 04:42:28 +0000 UTCmore at http://quickfound.net/
The Honeywell C-1 Autopilot was used on the B-17 Flying Fortress and other WWII aircraft.
Maintenance and Servicing of C-1 Autopilot: Part 5: Ground Checkout Trouble Shooting
Originally a public domain film, slightly cropped to remove uneven edges, with the aspect ratio corrected, and one-pass brightness-contrast-color correction & mild video noise reduction applied.
The soundtrack was also processed with volume normalization, noise reduction, clipping reduction, and/or equalization (the resulting sound, though not perfect, is far less noisy than the original).
http://www.airpages.ru/eng/mn/b17_20.shtml
Wikipedia license: http://creativecommons.org/licenses/by-sa/3.0/
The C-l autopilot is an electromechanical robot which automatically controls the airplane in straight and level flight, or maneuvers the airplane in response to the fingertip control of the human pilot or bombardier...
How It Works
The C-l autopilot consists of various separate units electrically interconnected to operate as a system. The operation of these units is explained in detail in AN-11-60AA-1. A general over-all understanding of their functions and relation to each other can be acquired by studying the accompanying illustration.
Assume that the airplane in the illustration is flying straight and level and that the autopilot is at work.
Suddenly rough air turns the airplane away from its established heading. The gyro-operated directional stabilizer (1) in the bombardier's compartment detects this deviation and moves the directional panel (4) to one side or the other, depending upon the direction of the deviation.
The directional panel contains 2 electrical devices, the banking pot (5) and the rudder pick-up pot (6), which send signals to the aileron and rudder section of the amplifier (16) whenever the directional panel is operated. These signals are amplified and converted (by means of magnetic switches or relays) into electrical impulses which cause the aileron and rudder Servo units (15 and 18) to operate the ailerons and rudder of the airplane in the proper direction and amount to turn the airplane back to its original heading.
Similarly, if the nose of the airplane drops, the vertical flight gyro (10) detects the vertical deviation and operates the elevator pick-up pot (11) which sends an electrical signal to the elevator section of the amplifier. The signal is amplified and relayed in the form of electrical impulses to the elevator Servo unit (19) which in turn raises the elevators the proper amount to bring the airplane to level flight.
If one wing drops appreciably, the vertical flight gyro operates the aileron pick-up pot (12), the skid pot (13), and the up-elevator pot (14). The signals caused by the operation of these units are transmitted to their respective (aileron, rudder, and elevator) sections of the amplifier. The resulting impulses to the aileron, rudder, and elevator Servo units cause each of these units to operate its respective control surface just enough to bank and turn the airplane back to a level-flight attitude.
When the human pilot wishes to make a turn, he merely sets the turn control knob (9) at the degree of bank and in the direction of turn desired. This control sends signals, through the aileron and rudder sections of the amplifier, to the aileron and rudder Servo units which operate ailerons and rudder in the proper manner to execute a perfectly coordinated (non-slipping, non-skidding) turn. As the airplane banks, the vertical flight gyro operates the aileron, skid, and up-elevator pots (12, 13, 14). The resulting signals from the aileron and skid pots cancel the signals to the aileron and rudder Servo units to streamline these controls during the turn.
The signals from the up-elevator pot cause the elevators to rise just enough to maintain altitude. When the desired turn is completed, the pilot turns the turn control back to zero and the airplane levels off on its new course. A switch in the turn control energizes the directional arm lock on the stabilizer, which prevents the stabilizer from interfering with the turn by performing its normal direction-correcting function...
