jeffquitney
patreon
How Sound Is Transmitted Via Radio ~ 1938 Prelinger Archives
🕑 Added 2019-09-19 01:45:47 +0000 UTCmore at http://quickfound.net/
Originally a public domain film from the Library of Congress Prelinger Archives, slightly cropped to remove uneven edges, with the aspect ratio corrected, and one-pass brightness-contrast-color correction & mild video noise reduction applied.
The soundtrack was also processed with volume normalization, noise reduction, clipping reduction, and/or equalization (the resulting sound, though not perfect, is far less noisy than the original).
https://en.wikipedia.org/wiki/AM_broadcasting
Wikipedia license: http://creativecommons.org/licenses/by-sa/3.0/
AM broadcasting is a radio broadcasting technology, which employs amplitude modulation (AM) transmissions. It was the first method developed for making audio radio transmissions, and is still used worldwide, primarily for medium wave (also known as "AM band") transmissions, but also on the longwave and shortwave radio bands.
The earliest experimental AM transmissions began in the early 1900s. However, widespread AM broadcasting was not established until the 1920s, following the development of vacuum tube receivers and transmitters. AM radio remained the dominant method of broadcasting for the next 30 years, a period called the "Golden Age of Radio", until television broadcasting became widespread in the 1950s and received most of the programming previously carried by radio. Subsequently, AM radio's audiences have also greatly shrunk due to competition from FM (frequency modulation) radio, Digital Audio Broadcasting (DAB), satellite radio, HD (digital) radio and Internet streaming.
AM transmissions are much more susceptible than FM or digital signals are to interference, and often have lower audio fidelity. Thus, AM broadcasters tend to specialise in spoken-word formats, such as talk radio, all news and sports, leaving the broadcasting of music mainly to FM and digital stations...
The person generally credited as the primary early developer of AM technology is Canadian-born inventor Reginald Fessenden. The original spark-gap radio transmitters were impractical for transmitting audio, since they produced discontinuous pulses known as "damped waves". Fessenden realized that what was needed was a new type of radio transmitter that produced steady "undamped" (better known as "continuous wave") signals, which could then be "modulated" to reflect the sounds being transmitted.
Fessenden's basic approach was disclosed in U.S. Patent 706,737, which he applied for on May 29, 1901, and was issued the next year. It called for the use of a high-speed alternator (referred to as "an alternating-current dynamo") that generated "pure sine waves" and produced "a continuous train of radiant waves of substantially uniform strength", or, in modern terminology, a continuous-wave (CW) transmitter. Fessenden began his research on audio transmissions while doing developmental work for the United States Weather Service on Cobb Island, Maryland. Because he did not yet have a continuous-wave transmitter, initially he worked with an experimental "high-frequency spark" transmitter, taking advantage of the fact that the higher the spark rate, the closer a spark-gap transmission comes to producing continuous waves. He later reported that, in the fall of 1900, he successfully transmitted speech over a distance of about 1.6 kilometers (one mile), which appears to have been the first successful audio transmission using radio signals. However, at this time the sound was far too distorted to be commercially practical...
Fessenden worked with General Electric's (GE) Ernst F. W. Alexanderson, who in August 1906 delivered an improved model which operated at a transmitting frequency of approximately 50 kHz, although at low power. The alternator-transmitter achieved the goal of transmitting quality audio signals, but the lack of any way to amplify the signals meant they were somewhat weak. On December 21, 1906, Fessenden made an extensive demonstration of the new alternator-transmitter at Brant Rock, Massachusetts, showing its utility for point-to-point wireless telephony, including interconnecting his stations to the wire telephone network. As part of the demonstration, speech was transmitted 18 kilometers (11 miles) to a listening site at Plymouth, Massachusetts...
Because there was no way to amplify electrical currents at this time, modulation was usually accomplished by a carbon microphone inserted directly in the antenna wire. This meant that the full transmitter power flowed through the microphone, and even using water cooling, the power handling ability of the microphones severely limited the power of the transmissions...
