ritualcasting
patreon
Gunnhild pre-supported STL files now available
🕑 Added 2020-03-05 19:07:54 +0000 UTCHey guys, I've updated the Google Drive with the pre-supported files for Gunnhild now that I've had a chance to properly test them all. Results have been good so I'm confident enough to release them now.
I have made a change to them that should allow for easier removal of the supports - they're slightly thinner and the tip is slightly smaller. I found they tend to come away quite easily when heated - I left mine in my sonic cleaner with only the heater set at 50C for an hour or so and a lot of the supports had come away with little to no marking.
As usual, they are lacking vent/drainage holes as Formware won't let me export it with drainage holes unless I commit to having them permanently added to the mesh and I don't like to presume how much clean up and hole filling folks are willing to do.
Some parts have been left solid due to making them hollow really not having much of an effect on resin savings and suction generally shouldn't be an issue due to a small surface area. I've listed both hollow and solid parts in the READ_ME.txt file inside the Zip so check that out and save yourself the hassle of figuring out which is which.
Edit: Thought I'd caught any supports poking through the bases this time. Turns out the axe escaped my notice. Zip has been updated with the fixed version.
https://www.patreon.com/posts/march-content-34443779
