kaidan3d
patreon
๐จ๏ธ TEST PRINT - Alphonse Elric (February Term) ๐จ๏ธ
🕑 Added 2025-03-05 15:43:01 +0000 UTCPrinter Settings:
๐ข Anycubic Mono X2
Layer Height: 0.05 mm
Normal Exposure: 2.5s
Bottom Exposure: 30s
Bottom Layers: 5
Lift Speed: 60 mm/min (bottom), 80 mm/min (normal)
Lift Distance: 5mm (bottom), 5mm (normal)
๐ต Elegoo Mars 2 Pro
Layer Height: 0.05 mm
Normal Exposure: 3.0s
Bottom Exposure: 35s
Bottom Layers: 5
Lift Speed: 60 mm/min (bottom), 80 mm/min (normal)
Lift Distance: 5mm (bottom), 5mm (normal)
โญ๏ธ Test Print by @renegat3d
๐ Note: These settings work well with standard resin, but you may need slight adjustments based on temperature, resin type, or model complexity.
Comments
Kaidan 3D
Of course, I will do it for every model I release!
Ronnie Rick Ogario
Can you do a test print for Igris as well please.
SavageCrow13
Not yet but soon
