kaidan3d
patreon
🖨️ TEST PRINT - Igris (February Term) 🖨️
🕑 Added 2025-03-08 15:57:13 +0000 UTCPrinter Settings:
🟢 Anycubic Mono X2
Layer Height: 0.05 mm
Normal Exposure: 2.5s
Bottom Exposure: 30s
Bottom Layers: 5
Lift Speed: 60 mm/min (bottom), 80 mm/min (normal)
Lift Distance: 5mm (bottom), 5mm (normal)
🔵 Elegoo Mars 2 Pro
Layer Height: 0.05 mm
Normal Exposure: 3.0s
Bottom Exposure: 35s
Bottom Layers: 5
Lift Speed: 60 mm/min (bottom), 80 mm/min (normal)
Lift Distance: 5mm (bottom), 5mm (normal)
⭐️ Test Print by @renegat3d
📌 Note: These settings work well with standard resin, but you may need slight adjustments based on temperature, resin type, or model complexity.
Comments
EMP COMICS
Where can I find this to print?
