BriteMinis patreon

The Five Bucks Club Repository

🕑 Added 2019-09-17 21:23:41 +0000 UTC

Comments

Pedro Angel Pueyo Berné

hello! first of all thank you for your nice work. Do you have some Ender 3 config settings? I have a lot of stringing no matter the retraction I try

Brite Minis

Have you followed this?: https://support.patreon.com/hc/en-us/articles/212052266-Getting-Discord-access

Brite Minis

In general, they are all FDM-friendly. If they break at the legs, check your z-hop settings, slow down a bit.

Ryan Sandzimier

Also, when I click on the Discord link, I just see "No text channels. You don't have access to any text channels or there are none in this server." I don't use Discord often. Do I have to be invited to get access or is something else wrong on my end?

Ryan Sandzimier

Hi. I've been enjoying printing your freebies on Thingiverse and just signed up for your Patreon. One question I had was that on Thingiverse I've had trouble printing some of the models (they break at the thin legs). I've had better success with the models you have named (on Thingiverse) specifically as "FDM friendly." In your repository, is there an easy way to tell what things you consider "FDM friendly" in the same way you label them on Thingiverse? Or is the best way to kind of eye ball it and stay away from models with thinner legs?

tuglover69

Pretty much the best minis available for FDM printing. I printed all the free ones, now let's do the whole shebang!

Gary Wilkinson

It was definitely my fault I’m sorry for wasting your time. Have full access now and am happily printing away.

Brite Minis

Can you see the files within folders?

Gary Wilkinson

hey mate love your work, when I follow the repository link only see 4 folders only and not the ones I would like to try and print. any help would be appreciated

fatboy1271

Excited to print some awesome models 🤘🤘

Pallagi Máté

Thank you!!

Brite Minis

He was incorrectly placed in NPCs, now moved to Animalfolk.

Pallagi Máté

Hey! Was the opossum druid a limited one too? I can only find it in the images (opossum_druid_1).

Brite Minis

they're all now in /Animalfolk/ folder

Jeffrey Barnes

Troglodytes 1 & 2 are missing, and the entire Lizardman folder. Thanks

John Marshall

Dude, I have been running a D&D game for the past year, wasting hours of time searching for models that will work on an FDM. As soon as I found that first zombie on thingieverse I was hooked and I'm happy to say you are my first ever Patreon sub. This is EXACTLY what I've been looking for, thank you so much!

Brite Minis

As all other modulars, they were available only for a limited time. Coming soon to Myminifactory.

yarinmimouni

Hi, somebody knows where I can find: "Birdfolk modular" ?

Beholder.Madness

It's in older STLs -> _older Thingiverse

OctoGoose

I can't seem to find "goblin_defensive_01" from the images folder, what's it called?

David Farcus

Older STL folder -> NPCs and Heroes folder

Brite Minis

I'm too boring to be a good video material. Share your channel though!

Robert Salters

Happy to be part of the community now. @briteminis any chance I can get you on as a guest to my Youtube channel?

Russ V

Love your models bro! As soon as I have something painted that does your work justice, I will post some pictures.

Douglas A Brundin Jr

Love the minis! I subscribed so I can make my frostgrave warband + monsters and it looks like you have most (or all) of the frostgrave series of monsters. Thanks so much.

Charlie

What are the chances of some tree models or at least stumps? More scatter terrain models in general would be great.

Brite Minis

indeed, uploaded correct zips now!

David Farcus

the other file is wrong too. I moved them after extraction...I thought we had two copies of the one and none of the other. All good...

David Farcus

The zip file for Hoplite_Spear01 has the wrong stl files in it. It has Spear01, Spear02_rb, and spear02_sb in it.

Brite Minis

Thank you and welcome!

Mark English

These miniatures are amazing! I am a longtime DM and a new 3D printer hobbiest and these open the door so much to interesting and visually stunning possibilities! Thank you for your hard work!

Rasmus Bækgaard

My son and i just finished reading the hobbit, now we can play with some easily printed miniatures thanks to your work. Thank you

Adrian

Hey there, does anybody know where I can find the stl file called "female_assasin"

Brite Minis

Oh, I myself glued together only a couple of my fingers, it's not that bad. Do you think a preassembled version for resin printing should be an option?

BensRPGPile

Is there a fully assembled version of each for us folks who are terrible at gluing models together?

Krzysztof

Newermind about ranger. I found it :). It was hard but I found it "Tiefling_ranger"

Krzysztof

How I can find devil with bow from 1 september 2020?I tryu to find name on post but with no results. BriteMinis you could add name of figure. It's hard to find by date. Especially when someone like me join 3 year later

Lamons Zorro

Very awesome work! I also was enjoying the free prints from thingiverse so much that I had to come and give my support! And also get more great models of course :)

skaldarnar

There is Older STLs/NPCs and Heroes/Plague_doctor.zip

Brite Minis

Thank you!

Abel Tomkinson

I appreciate all of your hard work and creativity. My daughter and I have been having a splendid time printing some of the free files we found on Thingiverse, and wanted to support you.

Adam Fairbairn

In the Monster Bucket

Battle Ready Crows

Would be really cool to see something akin to a Shivan Zombie, a Desolation Angel, a Phyrexian Negator, and a Flame-tongue Kavu. :3

Aaron Bucher

any hints to where the "Centaur male with spear" would be located

William W. Connors

Oh! More of these, please! Just delightful!

Brite Minis

Hi! follow the link and you'll find the model in folder Older STLs/NPCs and Heroes/

Gandaina

http://briteminis.com/?stl=Rogue

Gandaina

Hi, I want this item:

Zachary Bustamante

Goliaths with be really cool, maybe a leader goliath to go with them, Love your posts!

Fredlobster

how to get older modular models?

Zachary Bustamante

Would love to see a plague doctor

Wayne Michael Rogers

So happy to join this Patreon! One question...is the Modular Folder missing anything? Its only got a few pieces in each and a torso with no head?

Jamie Macdonald

I wish Troll2 could have been one model. Maybe his right hand scratching his belly. Still wonderful models.

Sabrina Goodpaster

Thank you! Your work is amazing, and as someone who prints minis on FDM they are true gold. :)

Brite Minis

weird, it seems Patreon is having some kind of problem right now.

Daemon Slye

I don't see a link to download files?

Brite Minis

They're in /NPCs and Heroes/, filenames start with bunny_

Storm Cabbit

what happened to rabbitfolk?

Donald Titmus

Any chance of chaos / demonic minis

Paul

this is what i was wondering too, thanks.

Johan Vad-Nielsen

I also just wanted to say that i really love your work. I scale your models to 18mm scale and boy do they look great at this scale! Also they print effortless on FDM even at this scale. Thank you!

Hydrukachan

I love your models, do you think you could make an ent?

Brite Minis

With the first release of the month previous models are moved to category folders in Older STLs folder. Contents of the folders can be sorted by modification date.

Georgi Hristov

Btw, for people who miss a few releases, what is the best way to catch up? So far I've been downloading the whole thing over and over again, but that's too cumbersome and I don't want to search and check a dozen models one by one.

Uncle_GG

Loving the style of your minis, reminds of me of 3rd edition WFB. Any chance of getting more variations of existing sculpts in the way of a couple of head swaps each month to add variety for rank & file games?

Malte Kamps

I love the style of your minis. I am honest, I just had to cheat on my Ender 3 and printed them in Resin - with splendid results. Thanks!

Владислав Зимин

Hello! You are amasing modeller! I am large fn od D&D, and love this Minies. I am printing it on Wanhao D12 with custom Head, and it works brilliant!

Roondar Raulnor

I'm your newest fan, have been working on printing up an Orc warband, but can't wait to really start to build my mini collection with your amazing work.

Daniel Vesely

thank you ...

Brite Minis

ah, he's bundled in hirelings_chest.zip set

Daniel Vesely

Great job!!! printet several minies so far and looks great !

Calvin Groves

Switched it up and printed at 50% - and added more to the bed to give things a chance to cool, and now the split minis work like a charm. Thank you!

Michael Ingraham

Love the minis. Any chance of a Fire Giant mini showing up?

Calvin Groves

Haha no, they scale perfectly! I'm printing everything at 40% scale - it loses some detail, but works well for my purposes. The legs do fit on the saddle, but the problem with the riders is the top of the legs and the bottom of the torso get all blobby and don't look like a rider!

Brite Minis

interesting, the rider doesn't fit the saddles? Are they scaled uniformly?

Calvin Groves

Your minis are great! I'm printing a bunch at a smaller scale for a board game, and have a question about the riders/mounts. Because I'm printing them smaller, the piece that get put together don't work as well. Is there a good way to combine them back to the full piece? The horseman rider prints great, but I'm looking to have a variety of riders. Thanks!

Austin Lobel

Is there a way you could make a drider? I have always wanted to play with one but everyone I found is very fine detail. Thank you for everything you do!

Ariston Collander

New to the group and absolutely love the minis! I've been pretty happy with the results printing them on a Creality CR-6 SE, and will continue to fine tune. Looking forward to future releases!

Michael Ingraham

Thank you for these minis. They print great.

Brite Minis

thank you, I really appreciate your comment!

Fredlobster

im so glad your work exists, love it, prints great on my ender 3 when i just wanna blast off some easy mins that look good without going through all the work with my resin printers

Fredrik Axelsson

Just wanted to leave a comment saying that your minis are great. I've downloaded a bunch and printed on my Ender 3 v2. They look great.

Brite Minis

Thank you!

amethystcoin

I appreciate and love the free minis posted on thingiverse. Large variety and quality out of your total works. I use a resin printer and am terrified of supports and print failures. These work excellently. I am glad to support you further and pay for what I've already gotten more than enough free value out of.

Mullen3

Hi, I'm new to Patreon & 3D printing. Thank you very much for the support free mini's that you have done. Once I get some printed & painted I'll post them for you to see.

Brite Minis

indeed, the Little Folk need more love

David Adams

Some fantastic stuff there, great work, thank you. Needs more Halflings though 😁

Nicola

Love your minis! Any plans for some skeleton animals/monsters? The skeles are my faves. Also, I found the staff on the dark elf sorcerer to be really fragile and broke coming off the printing plate, any chance to beef up the staff? Cheers!

John Fredin

yes this pushed me over the edge to sign up for Patreon also :)

Donald Titmus

Thanks, Love your models that I have printed so far 4 printers running working on your stuff.

Brite Minis

I moved it now to older STLs > _Terrain

Donald Titmus

Can you please tell me where the notice board model is?

Donald Titmus

Thanks that is great. I like the evil minis

Brite Minis

planning some demonic stuff soon

Donald Titmus

Hi you considered doing some of the old style minis from the chaos army, like the one made by the games workshop in the 90's

Cory

Your minis are great. I've printed all of the free ones on my Ender 3 so far without a single problem. Really added a lot of value to our games. Thanks!

evan miller

the snake guys look great. thank you

Brite Minis

yes, they are all made to be compatible

Bueno Bueno

That's exactly what I'm doing :) thanks. Honestly I'll probably end up downloading all of it over time. Quick question, do all the mounted units fit on any of the mounts? (horses, wolf, boar, etc)

Brite Minis

alas, gdrive doesn't generate previews, however you can use the catalogue at briteminis.com as a reference.

Bueno Bueno

wish there were images/previews of the files in the google drive though

Bueno Bueno

yes it does. i think i started figuring it out, tried to download the entire collection and it didn't work lol

Brite Minis

Hi! Does the address link in the post above work for you?

Bueno Bueno

hello! I'd like to thank you for making these great minis that are easy to print and look so detailed. Since i found your page on thingiverse my printer has not stopped running! I just signed up for your patreon (this is my first time on patreon) and i'm not entirely sure how to get the files that aren't available on thingiverse (i've downloaded almost everything from there already).

Brite Minis

Thanks & no worries, mate, all noted!

evan miller

i wish to apologize for previous posts. to much sugar, i do have a list of thingsi would like to se though. i will give list now a little more readable. : chariots, Ahigaru, vikings, a conan like barbarbian, centaurs, different mounts wolves camels, pegasus, birds, and chickens, yuan-ti or naga, loxodon, leonine, ant-men wasp men, thank you it is the best 5$ i spend

Zane

Huge fan of your work, your free models have more than most could ever need, but I saw a patreon exclusive I wanted and I didn't think twice about the subscription

Didier Dufresne

lol... my "benchy" is a BriteMinis hallberdier

David Elfpunsher

Hi from France. I just registered to your Patreon , finaly found a perfect Jabberwocky for Unmatched :) good work for all the figs ! cheers

Chris Fretwell

My first printed mini was from here as well. For me it was a samurai. I have six of that specific one now, as it has become my 'benchy'.

Ceri Evans

I've had a better success rate with your minis on my photon zero than anything else. Its a joy to not have to run any supports and the clean up is dramatically reduced. Keep it up! Off to print some gnolls..

Enrique Avalos

Your art is very cool and the prints look so classic and fit into many of my games. Thank you for your work.

Lilian

now i need some mummies, and remakes of Night Horrors http://solegends.com/citc/c018nighthorrors/198611fc18NightHorrorsx-01.jpg

Eric Van Wieren

Any estimate on the website? That would be so amazing!

Spruce_m00se

yet again, outstanding models for 28mm gaming, im going to print a few horses for use in battlemasters.!! :)

David Eitelsebner

Even better, thats awesome! Thanks

Brite Minis

Hi! Actually I'm finishing a website that will feature an online catalogue of all the minis with their filenames so that they can be easily found.

David Eitelsebner

Hi, I love the retro style of your minis, amazing! I have a "feature"-request: Can you maybe add folders to your repository named after months, containing all releases for that month? If I am looking for some releases of a previous month its harder to find the models in the "older STL" folder. Thank you, and keep up the amazing work - I love the new (half)-orcs :)

TheCraftingDen

Just found you as I was looking for another designer that created support-free minies! Keep up the amazing work!

Tobias Mrosek

Hi there, i just want to say that the first minis i printed on my 3d-Printer were those 3 skeletons from thingiverse and even if my print settings was not up to the task. I was amazed by the detail! thanks for giving me this unbelievable moment! Hope to get many more miniatures from you as a patreon.

Brite Minis

Thank you! I'm happy they suit your needs!

Spruce_m00se

Mate, I dropped TF this month in favour of your models, TF are cool yes, but the retro vibe on these, the scale fits perfectly with 28mm board games, and they are super easy to print, ive just popped them onto a standard Heroquest base and already ive printed more of your models in the 2 weeks since i found the thingyverse account, than i have in 5 months of supporting Titan Forge.

Brite Minis

Yes, will be doing half bodies for different classes so that they can be used with mounts. Other mounts planned as well.

evan miller

so yhe horse with the legs and the half bod was brilliant. are you thinking of converting some of your characters to half bod so we can mount those, and maybe some different knda mounts ( ie, wolves lizards)